Exterior Wash 100
단종

Outdoor rated RGBW color mixing wash light

Exterior Wash 100
큰 이미지

Limited quantity available - please contact your dealer for information

Exterior™ Wash 100 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate smaller structures, features of a building and landscaping. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 100 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white

 Learn more about our product verification and reliability

  • Narrow beam configuration with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

비디오

 

 

특징

  • Powerful Single-color R,G,B,W LEDs
  • Up to 1800 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

사양

  • Physical Length: 240 mm (9.5 in.) Width: 198 mm (7.8 in.) Height: 257 mm (10.2 in.) Weight: 5.0 kg (11.1 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending on DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 4 x R, 5 x G, 4 x B, 5 x W single-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 22°
    Wide diffuser: 50°
    Very wide diffuser: 60°
    Asymmetric diffuser: 61° x 15°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 1800 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.05 m² including snoot Impact resistance: IK08 (with display panel cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    RoHS compliant
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 5 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 9.7 A Maximum total power consumption: 50 W Surge protection: 4 KV Max earth leakage: 0.38 mA
    Typical Power and Current 100 V, 60 Hz: 0.45 A, 42 W, PF 0.99 120 V, 60 Hz: 0.35 A, 42 W, PF 0.99 230 V, 50 Hz: 0.2 A, 42 W, PF 0.93 277 V, 60 Hz: 0.2 A, 42 W, PF 0.85 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 160 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 43 lm/W LWR*: 360 lm/kg (162 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 100 Series, narrow diffuser kit: P/N 91610145 Exterior Wash 100 Series, medium diffuser kit: P/N 91610146 Exterior Wash 100 Series, wide diffuser kit: P/N 91610147 Exterior Wash 100 Series, very wide diffuser kit: P/N 91610148 Exterior Wash 100 Series, asymmetric diffuser kit: P/N 91610149 Exterior Wash 100 Series, glare shield / snoot: P/N 91611740 Exterior Wash 100 honeycomb louvre: P/N 91611856
    Ordering Information Exterior Wash 100, 7°, EU, aluminum: P/N 90510325 Exterior Wash 100, 7°, US, aluminum: P/N 90510340

다운로드

Specifications
  버전 언어 크기 업로드 날짜
file type icon Exterior Wash 100 Spec Sheet-English
en 버전 C, 업데이트: 2018년 11월
en  593KB 2018년 11월
file type icon Exterior Wash System Diagrams
en 버전 B, 업데이트: 2020년 10월
en  295KB 2020년 10월
Manuals
  버전 언어 크기 업로드 날짜
file type icon Exterior Wash 100 Series - User Manual
en 버전 L, 업데이트: 2020년 12월
en  1.96MB 2020년 12월
file type icon Exterior Wash 100 Serie - Bedienungsanleitung
de 버전 A, 업데이트: 2020년 7월
de  940KB 2020년 7월
file type icon Exterior Wash 100 Series - Manuel d'utilisation
fr 버전 A, 업데이트: 2020년 7월
fr  527KB 2020년 7월
Photometrics
  버전 언어 크기 업로드 날짜
file type icon Exterior Wash 100 - Photometric Files
en 버전 A, 업데이트: 2024년 3월
en  638KB 2024년 3월
Illustrations
  버전 언어 크기 업로드 날짜
en  3.3MB 2020년 10월
file type icon Exterior Wash 100 Series (no-snoot) - 2D dimensions (PDF)
en 버전 A, 업데이트: 2020년 10월
en  676KB 2020년 10월
file type icon Exterior Wash 100 Series (no-snoot) - 2D dimensions (DWG)
en 버전 A, 업데이트: 2020년 10월
en  3.46MB 2020년 10월
file type icon Exterior Wash 100 Series (With-snoot) - 2D dimensions (PDF)
en 버전 A, 업데이트: 2020년 10월
en  625KB 2020년 10월
Symbols
  버전 언어 크기 업로드 날짜
file type icon AutoCAD 2D Symbols
en 버전 2.8, 업데이트: 2026년 1월
2.8  en  4.42MB 2026년 1월
file type icon AutoCAD 3D Symbols
en 버전 2.8, 업데이트: 2026년 1월
2.8  en  18.7MB 2026년 1월
file type icon Vectorworks Symbols
en 버전 4.6, 업데이트: 2026년 1월
4.6  en  249MB 2026년 1월
CAD Drawings
  버전 언어 크기 업로드 날짜
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en 버전 A, 업데이트: 2018년 5월
en  56.5MB 2018년 5월
Compliances
  버전 언어 크기 업로드 날짜
file type icon Exterior Wash 100 Series - EU Declaration of Conformity
en 버전 A, 업데이트: 2018년 5월
en  95KB 2018년 5월
file type icon Exterior Wash Series - ETL Listing Verification
en 버전 B, 업데이트: 2018년 5월
en  349KB 2018년 5월
  407KB 2018년 5월
Service Notes
  버전 언어 크기 업로드 날짜
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
버전 4, 업데이트: 2020년 10월
  743KB 2020년 10월
file type icon Exterior products - Performing a vacuum test - Tech note
en 버전 H, 업데이트: 2020년 10월
en  1020KB 2020년 10월
EW series Incorrect warning print
업데이트: 2018년 5월
      2018년 5월
Tech Notes
  크기 업로드 날짜
file type icon EW-Series UV Warning Printing
업데이트: 2018년 1월
2018년 1월
Firmware
  버전 크기 업로드 날짜
download icon for Exterior Wash 100 - Firmware Exterior Wash 100 - Firmware
버전 2.0.0, 업데이트: 2026년 5월
2.0.0   2026년 5월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

지원/FAQ

HARMAN Professional Solutions:

Exterior Wash 100
단종

Outdoor rated RGBW color mixing wash light


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - IK08  Martin Warranty - 4KV