P3 PowerPort 500 IP Rental

Martin Creative LED 조명기구용 실내/실외 전원+데이터 유닛

P3 PowerPort 500 IP Rental

Martin P3 PowerPort 500 IP Rental은 Martin의 Creative LED 조명기구에 원활한 전원 및 데이터를 제공하며 실내/실외 렌탈 애플리케이션에 이상적입니다. 안정적인 전원 공급과 고속, 대용량 데이터 분배를 결합하여 조명기구 배포를 단순화합니다. 하우징은 랙, 트러스 및 벽면 설치에 대응하여 최대 배포 유연성을 제공합니다.

디자이너 및 통합자를 위한 최대 유연성을 보장하기 위해 Art-Net 및 sACN을 포함한 업계 표준 프로토콜뿐 아니라 Martin의 수상 경력이 있는 P3 제어 프로토콜을 사용하여 구동할 수 있습니다. 로컬 구성 또는 설정이 필요하지 않으므로 쉽게 배포할 수 있으며 전원 공급 장치를 조명기구에서 상당한 거리에 배치할 수 있습니다. 더 긴 케이블, 데이지 체인당 더 많은 조명기구, 분기 지원이 가능합니다. 내장된 네트워크 스위치는 써드파티 스위치의 필요성을 제거하며, 전원 제한 제어는 데이지 체인당 조명기구 수를 늘리면서 에너지 절감 조치를 구현합니다.

P3 PowerPort 500 IP Rental은 모든 입출력을 과부하 및 서지 상태로부터 보호하고 내장된 페일세이프 바이패스 기술이 단일 장치의 고장이 전체 네트워크를 중단시키는 것을 방지하므로 견고하고 신뢰할 수 있는 솔루션입니다. 또한 단일 케이블을 통해 조명기구에 데이터 및 전원을 제공하는 단일 장치입니다. 더욱이 로컬 상태 표시 LED와 테스트 버튼이 있어 컨트롤러 또는 컴퓨터에 물리적으로 위치할 사람이 필요하지 않습니다.

모든 P3 PowerPort 지원 Creative LED 조명기구는 동일한 데이지 체인에서도 P3 PowerPort 500 IP Rental과 페어링할 수 있습니다.

특징

  • Martin Creative LED 렌탈 픽스처용 실내/실외 전원+데이터 공급 장치
  • 렌탈 애플리케이션에 이상적
  • 픽스처 연결을 위한 1개의 전원+데이터 출력 기능
  • 쉬운 데이지 체이닝을 위한 내장 네트워크 스위치
  • 실시간 피드백을 제공하는 상태 LED
  • 쉬운 진단을 위한 로컬 테스트 버튼
  • 내장 전원 제어로 전체 출력이 필요하지 않을 때 데이지 체인당 더 많은 픽스처 지원
  • 시스템 미사용 시 에너지 절감을 위한 내장 절전 모드
  • Art-Net, sACN 및 Martin P3 호환
  • 쉬운 배치를 위한 커넥터 장착
  • 트러스, 랙 또는 벽 장착 가능
  • IP65 등급

더 알아보기

Martin P3 PowerPort 솔루션은 Martin Creative LED 조명 기구를 포함한 시스템을 구축하는 시스템 통합업체, 다양한 애플리케이션을 커버하기 위한 조명 기구 및 지원 인프라 플릿을 구성하는 렌탈 회사, 그리고 필요한 지원 인프라로 조명 설치를 보완하는 설치 고객에게 이상적입니다.

사양

  • Physical

    Width: 217.0 mm (8.5 in.) (single or double unit 19” rack-mountable with included rackmount ears)
    Height: 44.45 mm (1.75 in.) (rackmount 1U)
    Depth: 365.0 mm (14.4 in.)
    Weight: 3.5 kg (7.7 lbs.)

    Control and Programming

    Control Protocols: P3, sACN, Art-Net and RDM over Art-Net
    Protocol Detection: Automatic
    Settings and Feedback: P3 or RDM over Art-Net
    Unit identification: User-settable ID number
    Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
    sACN Compliance: ANSI E1.31 - 2018
    Martin P3 Compliance: P3 System Controller Software 6.1.0 or newer
    Ethernet Transceiver IN: 100/1000Mbit (with fail-safe bypass to Ethernet THRU)
    Ethernet Transceiver THRU: 100/1000Mbit (with fail-safe bypass to Ethernet IN)
    Ethernet Transceiver OUT: 100Mbit
    Firmware Update: via Ethernet using Martin Companion or P3 System Controller

    Control/User Interface Frontpanel

    Power Out Status: 1x Green LED
    Ethernet Out Status: 1x Amber LED
    Ethernet In/Thru Status 1-2: 2x Green+Amber LED
    Device Status: 1x RGB LED
    Device test and reset: Pushbutton to call up test patterns on fixtures connected to DCE output and reset device

    Control/User Interface Backpanel

    Fixtures Power Mode: DIP switch to force all connected fixtures in normal power, force all connected fixtures in half power or let controller decide (via P3 or RDM)
    Frontpanel Disable: DIP switch to disable all (5) Status LEDs and the pushbutton on the frontpanel

    Construction

    Color: Matte Black
    Housing Material: Aluminium
    Protection Rating: IP 65
    NEMA Enclosure Rating: Type 3
    Corrosion Resistance: ISO 12944-6: 2018; C3 Medium, Test regime ISO 9227, 240h

    Installation

    Orientation: Any
    Single Unit 19-inch Rackmount: Using supplied short and long rack mounting ears
    Dual Unit 19-inch Rackmount: Using supplied coupling plates and short rack mounting ears
    Wallmount: Using supplied short rack mounting ears
    Trussmount Vertical: Using half-coupler clamp in M10 threaded hole, max. bolt length 20 mm
    Trussmount Horizontal: Using halfcouplers in supplied short rack mounting ears
    Location: indoor or temporary outdoor

    Connections

    Power In/Thru: Neutrik powerCON TRUE1 TOP
    Ethernet In/Thru: 2x Neutrik etherCON TOP
    DC Power and Network output: 1x chassis-mount DCE hybrid connector (7pin)
    All connections hot plugging compatible

    Output Ports

    Quantity: 1
    Power: 48 VDC / 10 A
    Ethernet: 100Mbit (P3, sACN, Art-Net)

  • Electrical

    AC power: 100-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 2.7 A
    Typical earth-leakage current: 0.53 mA
    Power Factor: 0.99 @ 100 V / 120 V , 0.98 @ 208 V , 0.97 @ 230 V / 240 V
    Max current draw: 5.5 A @ 100 V / 120 V , 3.0 A @ 208 V / 230 V / 240 V
    Typical current draw: 5.3 A @ 100 V / 120 V , 2.6 A @ 208 V / 230 V / 240 V *
    Power Consumption
    Maximum: 500 W
    Typical: 480 W *
    Idle: 5 W *
    Hibernation: 4 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: output at full capacity with all connected fixtures at full output white.
    Idle: output at full capacity with all connected fixtures at zero output.
    Hibernation: output disabled; wake-up procedure required to re-use fixtures.

    Thermal

    Cooling: Convection
    Maximum Ambient Temperature (Ta max): 40° C (104° F)
    Minimum Ambient Temperature (Ta min): -30° C (-22° F)
    Maximum Surface Temperature, steady state, at 40° C ambient: 65° C (149° F)
    Typical Heat Dissipation (calculated, +/- 10%): 106 BTU/hr.

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging
    Approvals Global CB Certification/IECEE: IEC 62368-1 EU safety: EN 62368-1 EU EMC: EN 55032, EN55035, EN 61000-3-2, EN 61000-3-3 US safety: UL 62368-1 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 62368-1 Canadian EMC: ICES-003 Class B Australia/NZ: RCM United Kingdom: UKCA
    Compatible Fixtures

    VDO Sceptron XB
    Exterior Dot-1 Pro (via Exterior DC-Feeder)
    Exterior Dot-4 Pro (via Exterior DC-Feeder)
    Exterior Dot-9 Pro (via Exterior DC-Feeder)
    Exterior Dot-HP Pro

    Included Items

    1x Multi-Language Safety & Installation Manual
    1x Safety Cable Attachment Eyelet, incl. screws
    2x Short Rack Mounting Ears (usable for rack-, wall- and clamp-mounting), incl. screws
    1x Long Rack Mounting Ear (usable for rack-mounting), incl. screws
    1x Coupling Plate (usable for rack-mounting), incl. screws

    Related Items

    P3 PowerPort 2000: P/N MAR-90721200
    P3 PowerPort 500 IP Install: P/N MAR-90721202
    DCE PSU 240 IP: P/N MAR-90721203
    DCE DataSplitterBooster IP: P/N MAR-90721204

    Martin Companion Firmware Upload, Addressing and Stand-Alone Programming Software: Free download from www.martin.com

    P3-175 System Controller: P/N MAR-90721100
    P3-275 System Controller: P/N MAR-90721101
    P3-PC System Controller: Free download from www.martin.com

    Accessories

    AC Power Input Cables
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173

    AC Power Linking Cables
    Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
    Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

    AC Power Connectors
    Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
    Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU

    Pre-Assembled Hybrid DCE Cables
    DC + Ethernet Cable DCE-DCE 1m: P/N MAR-91700100
    DC + Ethernet Cable DCE-DCE 2.5m: P/N MAR-91700101
    DC + Ethernet Cable DCE-DCE 5m: P/N MAR-91700102
    DC + Ethernet Cable DCE-DCE 10m: P/N MAR-91700103
    DC + Ethernet Cable DCE-DCE 25m: P/N MAR-91700104

    Bulk Hybrid DCE Cables
    DC + Ethernet Cable 100m: P/N MAR-91700105
    DC + Ethernet Cable LSZH 100m: P/N MAR-91700106

    Field-Installable DCE Connectors
    Field-installable Connector DCE Male: P/N MAR-91700107
    Field-installable Connector DCE Female: P/N MAR-91700108

    Closing Caps for DCE Connectors
    Closing Cap Male DCE Connector: P/N MAR-91700109
    Closing Cap Female DCE Connector: P/N MAR-91700110

    Hybrid DCE Adapters
    DC + Ethernet Adapter DCE Male-Male: P/N MAR-91700111
    DC + Ethernet Adapter DCE Female-Female: P/N MAR-91700112
    DC + Ethernet Adapter EtherCON+Wires to DCE: P/N MAR-91700113
    DC + Ethernet Adapter DCE to EtherCON: P/N MAR-91700114

    Rigging Accessories
    Super Lightweight Half Coupler Rigging Clamp, black: P/N 91602018
    G-clamp (suspension with unit hanging downwards only): P/N 91602003
    Half-coupler Clamp: P/N 91602005
    Quick Trigger Clamp (suspension with unit hanging downwards only): P/N 91602007
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information

    P3 PowerPort 500 IP Rental: P/N MAR-90721201

다운로드

Specifications
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort 500 IP Rental - Spec Sheet
en 버전 B, 업데이트: 2025년 11월
en  1.25MB 2025년 11월
file type icon DCE Cables & Connectors - Drawings
en 버전 C, 업데이트: 2026년 5월
en  1.9MB 2026년 5월
file type icon Field-installable DCE Connectors - Assembly Instructions
en 버전 A, 업데이트: 2024년 8월
en  463KB 2024년 8월
Manuals
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort Family - Installation, Safety and User Manual
en 버전 B, 업데이트: 2024년 8월
en  1.8MB 2024년 8월
fr  2.01MB 2024년 8월
de  2.02MB 2024년 8월
es  1.89MB 2024년 8월
file type icon P3 PowerPort Family - Capacity Information Note
en 버전 C, 업데이트: 2026년 5월
en  250KB 2026년 5월
Illustrations
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort 500 IP Rental - 2D Dimensions
en 버전 A, 업데이트: 2024년 8월
en  2.81MB 2024년 8월
Symbols
  버전 언어 크기 업로드 날짜
file type icon Martin Professional GDTF Library
en 버전 A, 업데이트: 2023년 10월
en  203바이트 2023년 10월
file type icon AutoCAD 2D Symbols
en 버전 2.8, 업데이트: 2026년 1월
2.8  en  4.42MB 2026년 1월
file type icon AutoCAD 3D Symbols
en 버전 2.8, 업데이트: 2026년 1월
2.8  en  18.7MB 2026년 1월
file type icon Vectorworks Symbols
en 버전 4.6, 업데이트: 2026년 1월
4.6  en  249MB 2026년 1월
CAD Drawings
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort 500 IP Rental - 3D Model
en 버전 A, 업데이트: 2024년 8월
en  35.1MB 2024년 8월
BIM Objects
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort 500 IP Rental - BIM Object
en 버전 A, 업데이트: 2025년 5월
en  2025년 5월
Compliances
  버전 언어 크기 업로드 날짜
file type icon P3 PowerPort 500 IP Rental - ETL Authorization To Mark
en 버전 A, 업데이트: 2025년 2월
en  186KB 2025년 2월
en  414KB 2025년 9월
en  503KB 2024년 10월
file type icon P3 PowerPort 500 IP Rental - CB Test Certificate
en 버전 A, 업데이트: 2024년 10월
en  134KB 2024년 10월
file type icon P3 PowerPort 500 IP Rental - EU Declaration of Conformity
en 버전 A, 업데이트: 2024년 9월
en  221KB 2024년 9월
en  151KB 2024년 9월
file type icon P3 PowerPort 500 IP Rental - ETL Listing Verification
en 버전 A, 업데이트: 2024년 9월
en  481KB 2024년 9월
Firmware
  버전 크기 업로드 날짜
download icon for P3 PowerPort 500 IP - Firmware P3 PowerPort 500 IP - Firmware
버전 1.1.1, 업데이트: 2026년 6월
1.1.1   2026년 6월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

지원/FAQ

HARMAN Professional Solutions:

P3 PowerPort 500 IP Rental

Martin Creative LED 조명기구용 실내/실외 전원+데이터 유닛