RUSH MH 6 Wash
단종

Compact single lens wash light with RGBW color mixing

RUSH MH 6 Wash
큰 이미지

The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

  • Bright LED moving head wash light
  • 12 x 10 W RGBW LEDs
  • Single-lens wash with fully premixed color

비디오

 

 

특징

  • 12 x 10 W Osram Ostar RGBW LED’s
  • Single-lens wash with fully premixed color
  • 2,000 lumen output
  • 10°–60° zoom
  • 32 pre-built color macros
  • Temperature-controlled cooling system
  • Digital display menu
  • PowerCON in and through
  • 3 and 5-pin DMX options

사양

  • Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)
    Dynamic Effects Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°
    Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display White balance control: RGB adjustment DMX channels: 14 DMX compliance: USITT DMX512/1990
    Optics Zoom range: 10° - 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.
    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20
    Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)
    Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
  • Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*

    *Per IEC 60898/UL489/CSA C22.2 No. 5
    Power consumption figures are typical, not maximum. Allow for +/-10% variation.

    Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)
    Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM
    Included Items

    Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
    Omega bracket for rigging clamp attachment

    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Power connectors:

    Power Connector PowerCON Male: P/N 91611795
    Power Connector PowerCON Female : P/N 91611794

    Cables, 16 A, for connection to power in chains:

    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176

    Cables, 16 A, for power input:

    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
    (H07RN-F are European approved cables, SJOOW are US approved cables)

    Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information RUSH MH 6 Wash™ in cardboard box: P/N 90280080

다운로드

Manuals
  버전 언어 크기 업로드 날짜
file type icon RUSH MH 6 Wash - Manuel d'utilisation
fr 버전 B, 업데이트: 2018년 5월
fr  677KB 2018년 5월
file type icon RUSH MH 6 Wash - User Manual
en 버전 D, 업데이트: 2018년 5월
en  659KB 2018년 5월
file type icon RUSH MH 6 Wash - Bedienungsanleitung
de 버전 A, 업데이트: 2018년 5월
de  903KB 2018년 5월
Photometrics
  버전 언어 크기 업로드 날짜
file type icon RUSH MH 6 Wash - Photometric Files
en 버전 A, 업데이트: 2024년 3월
en  170KB 2024년 3월
Illustrations
  버전 언어 크기 업로드 날짜
file type icon RUSH MH 6 Wash - 2D (PDF)
en 버전 A, 업데이트: 2018년 5월
en  637KB 2018년 5월
file type icon RUSH MH 6 Wash - 2D (DWG)
en 버전 A, 업데이트: 2018년 5월
en  528KB 2018년 5월
Symbols
  버전 언어 크기 업로드 날짜
file type icon Vectorworks Symbols
en 버전 4.6, 업데이트: 2026년 1월
4.6  en  249MB 2026년 1월
CAD Drawings
  버전 언어 크기 업로드 날짜
file type icon Rush MH 6 Wash - 3D (DWG)
en 버전 A, 업데이트: 2018년 5월
en  4.85MB 2018년 5월
Compliances
  버전 언어 크기 업로드 날짜
file type icon RUSH MH 6 Wash - EU Declaration of Conformity
en 버전 B, 업데이트: 2019년 3월
en  663KB 2019년 3월
file type icon RUSH MH 6 Wash - ETL Listing Verification
en 버전 A, 업데이트: 2018년 5월
en  381KB 2018년 5월
Service Notes
  버전 언어 크기 업로드 날짜
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
버전 4, 업데이트: 2020년 10월
  743KB 2020년 10월
Tech Notes
  크기 업로드 날짜
2017년 9월
Hints and Tips
  버전 언어 크기 업로드 날짜
Avoiding damage from sunlight and other light sources
en 버전 B, 업데이트: 2018년 5월
B   en    2018년 5월
Firmware
  버전 크기 업로드 날짜
download icon for RUSH MH 6 Wash - Firmware RUSH MH 6 Wash - Firmware
버전 2.0, 업데이트: 2026년 5월
2.0   2026년 5월

위의 링크 중 하나에서 브라우저에 이상한 문자가 표시되면, 파일을 마우스 오른쪽 버튼으로 클릭하여 컴퓨터에 저장하세요.

뉴스

지원/FAQ

HARMAN Professional Solutions: