RUSH MH 6 Wash

Larger Images

The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

  • Bright LED moving head wash light
  • 12 x 10 W RGBW LEDs
  • Single-lens wash with fully premixed color


Product Demo


  • 12 x 10 W Osram Ostar RGBW LED’s
  • Single-lens wash with fully premixed color
  • 2,000 lumen output
  • 10°–60° zoom
  • 32 pre-built color macros
  • Temperature-controlled cooling system
  • Digital display menu
  • PowerCON in and through
  • 3 and 5-pin DMX options

Tech Specs

PhysicalLength: 290 mm (11.4 in.)Width: 189 mm (7.4 in.)Height: 360 mm (14.2 in.)Weight: 7.1 kg (15.7 lbs.)
Dynamic EffectsColor mixing: RGBWColor presets: 36 color presets plus full white, ‘color wheel’ effectsElectronic dimming: 0 - 100%, four dimming curve optionsStrobe and pulse effects: Variable speed and action, random strobeElectronic 'shutter' effect: Instant open and blackoutZoom: MotorizedPan: 540°Tilt: 200°
Control and ProgrammingControl options: DMXDMX channels: 14White balance control: RGB adjustment16-bit fine control: Dimming, pan and tiltDMX address setting: Control panel with LCD displayDMX compliance: USITT DMX512/1990
OpticsLight source: 12 x 10 W RGBW Osram Ostar LEDsMinimum LED lifetime: 50 000 hours (to >70% luminous output)*Zoom range: 10° - 60°*Figure obtained under manufacturer's test conditions
ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticIngress protection rating: IP20
InstallationMounting points: One quarter‐turn bracket for rigging clampLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to illuminated surfaces: 200 mm (8 in.)Minimum distance to combustible materials: 100 mm (4 in.)Minimum clearance around fans and vents: 100 mm (4 in.)
ConnectionsAC power in/thru: Neutrik PowerConDMX data in/thru: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 3.15 ARecommended Miniature Circuit Breaker*: Type D*Per IEC 60898/UL489/CSA C22.2 No. 5Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current120 V, 60 Hz: 1.3 A, 150 W, PF 0.99230 V, 50 Hz: 0.7 A, 150 W, PF 0.94Typical half-cycle RMS inrush current at 240 VAC: 11.3 AMeasurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)
ApprovalsEU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573, UL 8750US EMC: CFR Title 47 Part 15Canadian safety: CSA C22.2 No. 166Australia/NZ: C-TICK N4241 / RCM
Included ItemsPower input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plugOmega bracket for rigging clamp attachment
AccessoriesCablesPower input cable, AWG 14, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805DMX linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareHalf-coupler clamp: P/N 91602005G-clamp: P/N 91602003Quick-trigger clamp: P/N 91602007Safety cable, safe working load 50 kg: P/N 91604003
Related ItemsRUSH™ Software Uploader 1: P/N 91611399
Ordering InformationRUSH MH 6 Wash™ in cardboard box: P/N 90280080


Filename Version Language Size Uploaded
RUSH MH 6 - Software V1.2  en  165 KB Oct 24, 2016
RUSH Uploader DMX - Tool 1.1  en  1.18 MB Oct 08, 2015
RUSH MH 6 Wash - Manuel d'utilisation fr  677 KB Jan 18, 2016
RUSH MH 6 Wash - User Manual en  659 KB Nov 07, 2016
RUSH MH 6 Wash - Bedienungsanleitung de  903 KB Jan 11, 2016
3D Symbols
Vectorworks Symbols 2.5  en  110 MB Mar 27, 2018
Rush MH 6 Wash - 3D (DWG) en  4.85 MB Jan 13, 2016
RUSH MH 6 Wash - 2D (DWG) en  528 KB Aug 14, 2015
RUSH MH 6 Wash - 2D (PDF) en  637 KB Aug 14, 2015
Cad Drawings
Vectorworks Symbols     110 MB Sep 20, 2017
Tech Notes
Avoiding damage from sunlight and other light sources     Sep 22, 2017
Hints And Tips
Avoiding damage from sunlight and other light sources en    Dec 09, 2012
RUSH MH 6 Wash - ETL Listing Verification en  381 KB Nov 03, 2015
RUSH MH 6 Wash - EU Declaration of Conformity en  663 KB Mar 11, 2019
Service Notes
3DPartsfinder using Solid Works Composer player en    Mar 04, 2016
Information Documents
3DPartsfinder Using Solid Works Composer Player     Sep 22, 2017

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.