Exterior Wash 220
Ngừng sản xuất

Đèn rửa điều khiển nhiệt độ màu đạt tiêu chuẩn ngoài trời

Exterior Wash 220
Hình ảnh lớn hơn

Số lượng có hạn  - vui lòng liên hệ đại lý của bạn để biết thông tin

Exterior™ Wash 220 là một thiết bị chiếu sáng LED mạnh mẽ, nhỏ gọn và tiết kiệm năng lượng được thiết kế để chiếu sáng các công trình và mặt tiền tòa nhà có kích thước vừa phải. Một snoot tùy chọn kín đáo tích hợp liền mạch với thiết kế bóng bẩy của các thiết bị. Nó có màn hình hiển thị tích hợp để dễ sử dụng, lựa chọn rộng các góc chùm sáng và được xếp hạng IP đầy đủ cho mục đích sử dụng ngoài trời vĩnh viễn.

Exterior Wash 220 được thiết kế cho các ứng dụng có nhiệt độ màu thay đổi (2700K-6500K) và dựa trên các LED 2700K và 6500K riêng biệt

Tìm hiểu thêm về xác minh sản phẩm và độ tin cậy của chúng tôi

  • Điều khiển nhiệt độ màu thay đổi với 6 tùy chọn góc chùm sáng
  • Snoot tùy chọn chức năng và kín đáo tích hợp với thiết kế của các thiết bị
  • Điều khiển thông qua DMX, RDM và màn hình OLED

Video

 

 

Tính năng

  • LED mạnh mẽ (2700K, 6500K)
  • Lên đến 9300 lumens ở chế độ trắng toàn phần
  • Sáu tùy chọn góc chùm khác nhau
  • Điều khiển và nguồn điện nội bộ (DMX, RDM và màn hình OLED)
  • Vỏ IP66 chắc chắn
  • Điều khiển cường độ 0–100%

Thông số kỹ thuật

  • Physical Length: 270 mm (10.7 in.) Width: 334 mm (13.2 in.) Height: 382 mm (15.1 in.) Weight: 13.0 kg (28.7 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K - 6500 K
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3 Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 2700 K and 6500 K LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 25°
    Wide diffuser: 36°
    Very wide diffuser: 60°
    Asymmetric diffuser: 59° x 14.5°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 9300 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 4 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.3 A Maximum total power consumption: 185 W Surge protection: 4 KV Max earth leakage: 0.50 mA
    Typical Power and Current 100 V, 60 Hz: 1.6 A, 162 W, PF 0.99 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94 277 V, 60 Hz: 0.65 A, 160 W, PF 0.93 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 58 lm/w LWR*: 715 lm/kg (324 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745 Exterior Wash 200 Honeycomb Louvre: P/N 91611857
    Ordering Information Exterior Wash 220, 7°, EU, aluminum: P/N 90509089 Exterior Wash 220, 7°, US, aluminum: P/N 90509091

Tải xuống

Specifications
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 220 Spec Sheet-English
en phiên bản B, cập nhật: Thg 11 2018
en  700 KB Thg 11 2018
file type icon Exterior Wash System Diagrams
en phiên bản B, cập nhật: Thg 10 2020
en  300 KB Thg 10 2020
Manuals
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 200 Series - User Manual
en phiên bản M, cập nhật: Thg 7 2023
en  1 MB Thg 7 2023
file type icon Exterior Wash 200 Serie - Bedienungsanleitung
de phiên bản A, cập nhật: Thg 7 2020
de  900 KB Thg 7 2020
file type icon Exterior Wash 200 Series - Manuel d'utilisation
fr phiên bản A, cập nhật: Thg 10 2020
fr  700 KB Thg 10 2020
Photometrics
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 220 - Photometric Files
en phiên bản A, cập nhật: Thg 3 2024
en  500 KB Thg 3 2024
Illustrations
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 200 Series (With-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  7 MB Thg 10 2020
file type icon Exterior Wash 200 Series (no-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  2 MB Thg 10 2020
file type icon Exterior Wash 200 Series (no-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  8 MB Thg 10 2020
file type icon Exterior Wash 200 Series (With-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  2 MB Thg 10 2020
Symbols
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon AutoCAD 2D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  4 MB Thg 1 2026
file type icon AutoCAD 3D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  20 MB Thg 1 2026
file type icon Vectorworks Symbols
en phiên bản 4.6, cập nhật: Thg 1 2026
4.6  en  200 MB Thg 1 2026
Compliances
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 200 Series - EU Declaration of Conformity
en phiên bản A, cập nhật: Thg 10 2020
en  90 KB Thg 10 2020
file type icon Exterior Wash Series - ETL Listing Verification
en phiên bản B, cập nhật: Thg 5 2018
en  300 KB Thg 5 2018
  400 KB Thg 5 2018
Service Notes
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
phiên bản 4, cập nhật: Thg 10 2020
  700 KB Thg 10 2020
file type icon Exterior products - Performing a vacuum test - Tech note
en phiên bản H, cập nhật: Thg 10 2020
en  1000 KB Thg 10 2020
EW series Incorrect warning print
cập nhật: Thg 5 2018
      Thg 5 2018
Tech Notes
  Kích thước Đã tải lên
file type icon EW-Series UV Warning Printing
cập nhật: Thg 1 2018
Thg 1 2018
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for Exterior Wash 220 - Firmware Exterior Wash 220 - Firmware
phiên bản 2.0.0, cập nhật: Thg 5 2026
2.0.0   Thg 5 2026

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Hỗ trợ/FAQ

Exterior Wash 220
Ngừng sản xuất

Đèn rửa điều khiển nhiệt độ màu đạt tiêu chuẩn ngoài trời


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - IK08  Martin Warranty - 4KV