Exterior Wash Pro S QUAD

户外级QUAD色彩洗墙灯,具有创意控制功能

Exterior Wash Pro S QUAD
较大的图像

专为恶劣环境和创意设计,Exterior Wash Pro S QUAD 提供了一套逻辑清晰、使用便捷且功能多样的照明解决方案,旨在照亮较小的建筑结构、建筑特征和景观。该灯具配备外部微透镜和可选的挡光罩,提供可配置的光束控制。Exterior Wash Pro S QUAD 具有无与伦比的色彩性能。工厂色彩标定确保了卓越的色彩一致性,并提供了专用的色温控制通道,范围从 1000K 至 12,500K,精确遵循黑体曲线。集成的色彩增强技术实现了 LED 容量与电源容量之间的智能比例,使饱和色和混合色的亮度比前代产品提高了三倍。作为专为永久性室外安装而设计,并享有 5 年保修,该灯具符合严格的环境标准。

  • 凝聚产品线内的设计美学

    可选择四种尺寸和流明输出配置,配备集成挡光筒选项,增加多功能性。

  • 精确光束控制

    凭借狭窄的光束角,在远距离应用中实现精确的光控制和高强度输出,同时最大限度地减少杂散光。

  • 无与伦比的色彩表现

    美观的外形设计,具备无缝色彩混合和色彩增强功能,饱和度和混合色彩亮度最高可提升3倍。

  • 精妙的色彩控制

    包含专用控制通道,可用户自选默认色温,范围从暖色1000K至冷色12,500K,遵循黑体辐射曲线。

  • SMART CONTROL

    Easy local diagnostics and focusing using the integrated magnetic sensor. Easy configuration and stand-alone programming via Martin Companion.

  • RESPONSIBLE CHOICE

    Durable design for permanent outdoor installations, backed by a 5-year warranty, and meet rigorous environmental standards. Their compact, lightweight design minimizes environmental impact and shipping costs, they are fully repairable, and ship in full cardboard FSC-certified packaging.

featured content

凝聚产品线内的设计美学

可选择四种尺寸和流明输出配置,配备集成挡光筒选项,增加多功能性。

featured content

精确光束控制

凭借狭窄的光束角,在远距离应用中实现精确的光控制和高强度输出,同时最大限度地减少杂散光。

featured content

无与伦比的色彩表现

美观的外形设计,具备无缝色彩混合和色彩增强功能,饱和度和混合色彩亮度最高可提升3倍。

featured content

精妙的色彩控制

包含专用控制通道,可用户自选默认色温,范围从暖色1000K至冷色12,500K,遵循黑体辐射曲线。

featured content

SMART CONTROL

Easy local diagnostics and focusing using the integrated magnetic sensor. Easy configuration and stand-alone programming via Martin Companion.

featured content

RESPONSIBLE CHOICE

Durable design for permanent outdoor installations, backed by a 5-year warranty, and meet rigorous environmental standards. Their compact, lightweight design minimizes environmental impact and shipping costs, they are fully repairable, and ship in full cardboard FSC-certified packaging.

视频

 

 

特点

  • Logic family of four sizes and lumen packages (S, M, L, XL)
  • Compact and slim design
  • Superior color consistency based on factory calibration
  • Color boost for bright saturated and mixed colors
  • Dedicated color temperature control channel
  • Narrow beam-angle using high-power RGBW LEDs
  • Optional baffle snoot
  • Externally mounted micro lens diffusers
  • RDM and DMX control
  • Local diagnostics and focusing via magnetic sensor
  • Power and DMX IN/OUT pre-mounted cables
  • Optional Hybrid IN/Out cable solution for easy daisy-chain
  • Fully weatherized housing (IP66, IK08 and C-5 High corrosion rating)
  • Shipped in FSC certified carboard packaging
  • 5-year warranty

性能

  • 物理特性 长度: 141 mm (5.55 inch.) 宽: 155 mm (6.10 inch.) 高: 236 mm (9.29 inch.) 重量: 4.4 kg (9.7 lbs)
    Dynamic Effects Strobe: Regular and random strobe (in extended mode) Intensity: 0 - 100 % continuous dimming Color mixing: RGB + CTC (Color Temperature Control) Color temperature control: 1000 K - 12500K in 50K steps
    Control and Programming Control systems: DMX, RDM User interface: Magnetic sensor for local diagnostics and focusing Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX control of each color Dimmer Resolution: 16-bit DMX control of intensity DMX channels: 6/3/7/4 (Standard/Basic/Extended/Raw) DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX/RDM Transceiver: Galvanic-isolated RS-485 Firmware update: Serial upload via DMX link
    Optics

    Light source: 4 x RGBW LEDs
    Total LED power: 160 W (4 x 40 W )
    Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*
    LED manufacturer: Osram
    Binning: Tight color and flux binning
    Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
    *Figure obtained under manufacturer's test conditions at Ta = 25° C.

    Beam Angle Options Native beam angle: 8° Narrow micro lens: 10° Medium micro lens: 16° Wide micro lens: 30° Very Wide micro lens: 54° Asymmetric micro lens: 9° x 56°
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 1000K - 12500K (Default 4000K)
    LUMINOUS OUTPUT* 2400K: 900 lm 4000K: 1200 lm 6500K: 1800 lm Full Output: 1800 lm Red: 620 lm Green: 1320 lm Blue: 470 lm * All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.
    Construction Housing: Cast Aluminum 颜色: Traffic grey RAL 7042 or Traffic white RAL 9016 - other colors available on request Surface treatment: Anodized and electrostatic powder-coated Protection rating: IP66 Effective Projected Area (EPA): 0.026 m² / 0.038 m² Impact resistance: IK08 Corrosion resistance: C5 High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
  • Installation 装配: Adjustable bracket Orientation: Any Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)
    Connections Power connection: 2 m (6.5 ft.) cable tail open ended Power input cable type, EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE   Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1 Data connection: 2 m (6.5 ft.) open ended 6-conductor combined In/Out cable tail Hybrid power/data cables (in & thru) 8-pin custom connectors available on request
    Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: 12 A Surge protection: 4 KV Max earth leakage: 0.5 mA Power factor: 0.99 @110 V / 120 V, 0.94 @208 V / 230V, 0.92 @277 V Max current draw: 0.35 A @100 V, 0.29 A @120 V, 0.15 A @230 V, 0.13 A @277 V
    Power Consumption Maximum Power Consumption: 35 W (Reduced mode 28W)* Idle: 2.0 W* * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity
    Thermal 散热: Convection Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)** Total heat dissipation (calculated, +/- 10%): 119 BTU/hr *Above this temperature, the fixture regulates output to protect from overheating.
    **Power must be maintained below -20° C (-4° F)
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Packaging: FSC certified cardboard inlay and outer box Efficacy (max output): 51 lm/W LWR*: 409 lm/kg (186 lm/lb)*
    *LWR = Lumen-to-Weight Ratio
    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM United Kingdom: UKCA India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Ordering Information - Fixtures Exterior Wash Pro S QUAD, EU, grey: P/N MAR-90590001 Exterior Wash Pro S QUAD, US, grey: P/N MAR-90590005 Exterior Wash Pro S QUAD, EU, white: P/N MAR-90590101
    Ordering Information - Accessories Micro Lens Pro S - Narrow: P/N MAR-90590026 Micro Lens Pro S - Medium: P/N MAR-90590027 Micro Lens Pro S - Wide: P/N MAR-90590028 Micro Lens Pro S - Very Wide: P/N MAR-90590029 Micro Lens Pro S - Asymmetric: P/N MAR-90590030 Baffle Snoot Pro S QUAD: P/N MAR-90590017 Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020 Attachment plate for safety wire: P/N MAR-90590050 Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022 Exterior Multitool: P/N MAR-90590025 Junction Box Power DMX to PD: P/N MAR-91700019

下载

Specifications
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro S QUAD Spec Sheet
en 版本 I, 更新: 4月 2026
en  1.5 MB 4月 2026
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en 版本 B, 更新: 7月 2025
en  957.7 KB 7月 2025
file type icon Exterior Wash Pro System Diagram
en 版本 B, 更新: 11月 2025
en  921.0 KB 11月 2025
file type icon Descriptive Specs - Exterior Wash Pro S QUAD
en 版本 B, 更新: 8月 2024
en  104.4 KB 8月 2024
Manuals
  版本 语言 大小 上传日期
fr  2.9 MB 8月 2025
es  2.8 MB 8月 2025
de  2.8 MB 8月 2025
en  2.5 MB 8月 2025
Photometrics
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro S QUAD - Photometrics
en 版本 C, 更新: 11月 2024
en  9.8 MB 11月 2024
Illustrations
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro S - 2D dimensions (PDF)
en 版本 B, 更新: 10月 2025
en  581.4 KB 10月 2025
file type icon Exterior Wash Pro S - 2D dimensions (DWG)
en 版本 B, 更新: 10月 2025
en  3.1 MB 10月 2025
Symbols
  版本 语言 大小 上传日期
file type icon AutoCAD 2D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  4.4 MB 1月 2026
file type icon AutoCAD 3D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  18.7 MB 1月 2026
file type icon Vectorworks Symbols
en 版本 4.6, 更新: 1月 2026
4.6  en  248.9 MB 1月 2026
file type icon Martin Professional GDTF Library
en 版本 A, 更新: 10月 2023
en  203 字节 10月 2023
CAD Drawings
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro S - 3D DWG
en 版本 A, 更新: 1月 2024
en  7.6 MB 1月 2024
file type icon Exterior Wash Pro S - 3DS
en 版本 A, 更新: 1月 2024
en  10.3 MB 1月 2024
BIM Objects
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro S QUAD - BIM Object
en 版本 A, 更新: 5月 2025
en  5月 2025
Compliances
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro - CB Test Certificate
en 版本 A, 更新: 3月 2024
en  315.3 KB 3月 2024
en  163.4 KB 3月 2024
en  230.2 KB 3月 2024
en  460.7 KB 3月 2025
file type icon Exterior Wash Pro - ETL Listing Verification
en 版本 A, 更新: 2月 2024
en  472.7 KB 2月 2024
Service Notes
  版本 语言 大小 上传日期
file type icon PD Cable kit - Modification Instruction
en 版本 B, 更新: 1月 2025
en  527.2 KB 1月 2025
file type icon Assembly instruction for PD hybrid connectors
en 版本 A, 更新: 1月 2025
en  5.2 MB 1月 2025
Firmware
  版本 大小 上传日期
download icon for Exterior Wash Pro Family - Firmware Exterior Wash Pro Family - Firmware
版本 1.1.0, 更新: 6月 2026
1.1.0   6月 2026

如果上述任何链接在您的浏览器中显示为奇怪的字符,请右键点击文件以将其保存到您的计算机。

新闻

支援/最常见问题

HARMAN Professional Solutions: