Exterior Wash Pro XL CTC

户外防护色温可调洗光灯

Exterior Wash Pro XL CTC
较大的图像

专为恶劣环境和创意应用而设计,Exterior Wash Pro XL CTC 提供了一款逻辑清晰、易于使用且功能多样的照明解决方案,用于照亮大型建筑结构和立面。该灯具配备外部镜头和可选的遮光筒,提供可调节的光束控制。Exterior Wash Pro XL CTC 具备专业色温控制功能,范围为 2400K 至 6500K。该灯具专为永久户外安装设计,并提供 5 年保修期,符合严格的环保标准。

  • 逻辑清晰且完整的产品系列

    可选择四种规格和流明输出配置,满足各种安装需求和预算。紧凑轻巧的设计配有集成挡光筒选项,提供更高的应用灵活性。

  • 精确光束控制

    凭借狭窄的光束角,实现精确的光线控制和高强度,同时在远距离应用中最小化杂光干扰。

  • 扩展色温范围

    Exterior Wash Pro CTC 型号配备暖白 (2400K)、中性 (4000K) 和冷白 (6500K) LED,提供扩展的色温范围并改善白光质量。

  • 卓越的色温控制

    专用控制通道,可选择从暖色 2400K 至冷色 6500K 的色温。

  • 智能控制

    集成磁传感器理想适用于本地诊断和对焦。另包含RDM控制和通过Martin Companion的独立编程,便于配置。

  • 负责任的选择

    耐用设计专为永久户外安装而构,获得5年保修承诺,并符合严格的环保标准。紧凑轻巧的设计可最大限度地降低环境影响和运输成本、产品完全可维修、采用FSC认证纸板包装运输。

featured content

逻辑清晰且完整的产品系列

可选择四种规格和流明输出配置,满足各种安装需求和预算。紧凑轻巧的设计配有集成挡光筒选项,提供更高的应用灵活性。

featured content

精确光束控制

凭借狭窄的光束角,实现精确的光线控制和高强度,同时在远距离应用中最小化杂光干扰。

featured content

扩展色温范围

Exterior Wash Pro CTC 型号配备暖白 (2400K)、中性 (4000K) 和冷白 (6500K) LED,提供扩展的色温范围并改善白光质量。

featured content

卓越的色温控制

专用控制通道,可选择从暖色 2400K 至冷色 6500K 的色温。

featured content

智能控制

集成磁传感器理想适用于本地诊断和对焦。另包含RDM控制和通过Martin Companion的独立编程,便于配置。

featured content

负责任的选择

耐用设计专为永久户外安装而构,获得5年保修承诺,并符合严格的环保标准。紧凑轻巧的设计可最大限度地降低环境影响和运输成本、产品完全可维修、采用FSC认证纸板包装运输。

视频

 

 

特点

  • Logic 系列产品提供四种尺寸和流明配置(S、M、L、XL)
  • 紧凑纤薄的设计
  • 扩展色温控制范围:2400K - 6500K
  • 超过 60 lm/W 的效率
  • 采用大功率 LED 的窄光束角
  • 可选遮光套筒
  • 外装微透镜扩散器
  • RDM 和 DMX 控制
  • 通过磁性传感器进行本地诊断和调焦
  • 电源和 DMX 进/出预装电缆
  • 可选混合进/出电缆解决方案,便于菊花链级联连接
  • 完全防风雨的外壳(IP66、IK08 和 C-5 高腐蚀等级)
  • 采用 FSC 认证纸板包装发货
  • 5 年保修

性能

  • 物理特性 长度: 175 mm (6.89 inch.) 宽: 351 mm (13.82 in.) 高: 438 mm (17.24 in.) 重量: 17.7 kg (39.0 lbs.)
    Dynamic Effects Intensity: 0 - 100 % Color temperature control: 2400K - 6500K
    Control and Programming Control systems: DMX, RDM User interface: Magnetic sensor for local diagnostics and focusing Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX control of each color Dimmer Resolution: 16-bit DMX control of intensity DMX channels: 3/3 (Standard/Basic) DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX/RDM Transceiver: Galvanic-isolated RS-485 Firmware update: Serial upload via DMX link
    Optics

    Light source: 21 x 2400K, 21 x 4000K, 22 x 6500K white LEDs
    Total LED power: 384 W (64 x 6 W)
    Minimum LED lifetime: 100 000 hours (to > 70% luminous output)*
    LED manufacturer: Cree
    Binning: Tight color and flux binning
    *Figure obtained under manufacturer's test conditions at Ta = 25° C.

    Beam Angle Options Native beam angle: 7° Narrow micro lens: 9° Medium micro lens: 15° Wide micro lens: 30° Very Wide micro lens: 50° Asymmetric micro lens: 8° x 60°
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 2400K - 6500K (default 4000K)
    LUMINOUS OUTPUT* 2400K: 8200 lm 4000K: 17000 lm 6500K: 13000 lm
    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25 °C ambient.
    Construction Housing: Cast Aluminum 颜色: Traffic grey RAL 7042 - other colors available on request Surface treatment: Anodized and electrostatic powder-coated Protection rating: IP66 Effective Projected Area (EPA): 0.0149 m² / 0.180 m² Impact resistance: IK08 Corrosion resistance: C5 High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
  • Installation 装配: Adjustable bracket Orientation: Any Minimum distance to illuminated surfaces: 0.4 m (1.3 ft.)
    Connections Power connection: 2 m (6.5 ft.) cable tail open ended Power input cable type, EU models: H07RN-F 3G 1.0 mm², 450/750V, VDE Power input cable type, US models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1 Data connection: 2 m (6.5 ft.) open ended 6-conductor combined input + output cable tail
    Hybrid power/data cables (in & thru) 8-pin custom connectors available on request
    Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical half-cycle RMS inrush current: 14 A Surge protection: 4 KV Max earth leakage: 0.5 mA Power factor: 0.99 @ 110 V / 120 V, 0.96 @ 208 V / 230V, 0.90 @ 277 V Max current draw: 2.50 A @ 100 V, 2.1 A @ 120 V, 1.1 A @ 230 V, 0.54 A @ 277 V
    Power Consumption Maximum Power Consumption: 250 W (reduced mode 200W)* Idle: 4.0 W*
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity
    Thermal 散热: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Total heat dissipation (calculated, +/- 10%): 853 BTU/hr *Above this temperature, the fixture regulates output to protect from overheating.
    **Power must be maintained below -20° C (-4° F)
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Packaging: FSC certified cardboard inlay and outer box Efficacy (max output): 70 lm/W LWR*: 960 lm/kg (436 lm/lb)* *LWR = Lumen-to-Weight Ratio
    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM United Kingdom: UKCA India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Ordering Information - Fixtures Exterior Wash Pro XL CTC, EU, grey: P/N MAR-90590012 Exterior Wash Pro XL CTC, US, grey: P/N MAR-90590016
    Ordering Information - Accessories Micro Lens Pro XL - Narrow: P/N MAR-90590041 Micro Lens Pro XL - Medium: P/N MAR-90590042 Micro Lens Pro XL - Wide: P/N MAR-90590043 Micro Lens Pro XL - Very Wide: P/N MAR-90590044 Micro Lens Pro XL - Asymmetric: P/N MAR-90590045 Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020 Attachment plate for safety wire: P/N MAR-90590050 Baffle Snoot Pro XL CTC: P/N MAR-90590024 Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022 Exterior Multitool: P/N MAR-90590025 Junction Box Power DMX to PD: P/N MAR-91700019

下载

Specifications
  版本 语言 大小 上传日期
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en 版本 B, 更新: 7月 2025
en  957.7 KB 7月 2025
file type icon Exterior Wash Pro System Diagram
en 版本 B, 更新: 11月 2025
en  921.0 KB 11月 2025
file type icon Exterior Wash Pro XL CTC Spec Sheet
en 版本 F, 更新: 2月 2026
en  1.7 MB 2月 2026
file type icon Descriptive Specs - Exterior Wash Pro XL CTC
en 版本 A, 更新: 2月 2024
en  101.6 KB 2月 2024
Manuals
  版本 语言 大小 上传日期
en  2.5 MB 8月 2025
fr  2.4 MB 10月 2024
de  2.4 MB 10月 2024
es  2.4 MB 10月 2024
Photometrics
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro XL CTC Photometrics
en 版本 B, 更新: 6月 2026
en  9.8 MB 6月 2026
Illustrations
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro XL - 2D dimensions (PDF)
en 版本 B, 更新: 10月 2025
en  1.0 MB 10月 2025
file type icon Exterior Wash Pro XL - 2D dimensions (DWG)
en 版本 B, 更新: 10月 2025
en  5.1 MB 10月 2025
Symbols
  版本 语言 大小 上传日期
file type icon AutoCAD 2D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  4.4 MB 1月 2026
file type icon AutoCAD 3D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  18.7 MB 1月 2026
file type icon Vectorworks Symbols
en 版本 4.6, 更新: 1月 2026
4.6  en  248.9 MB 1月 2026
file type icon Martin Professional GDTF Library
en 版本 A, 更新: 10月 2023
en  203 字节 10月 2023
CAD Drawings
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro XL - 3D DWG
en 版本 A, 更新: 1月 2024
en  14.4 MB 1月 2024
file type icon Exterior Wash Pro XL - 3DS
en 版本 A, 更新: 1月 2024
en  25.3 MB 1月 2024
BIM Objects
  版本 语言 大小 上传日期
file type icon Exterior Wash Pro XL CTC - BIM Object
en 版本 A, 更新: 5月 2025
en  5月 2025
Compliances
  版本 语言 大小 上传日期
en  460.7 KB 3月 2025
file type icon Exterior Wash Pro - ETL Listing Verification
en 版本 A, 更新: 2月 2024
en  472.7 KB 2月 2024
en  230.2 KB 3月 2024
en  163.4 KB 3月 2024
file type icon Exterior Wash Pro - CB Test Certificate
en 版本 A, 更新: 3月 2024
en  315.3 KB 3月 2024
Service Notes
  版本 语言 大小 上传日期
file type icon PD Cable kit - Modification Instruction
en 版本 B, 更新: 1月 2025
en  527.2 KB 1月 2025
file type icon Assembly instruction for PD hybrid connectors
en 版本 A, 更新: 1月 2025
en  5.2 MB 1月 2025
Firmware
  版本 大小 上传日期
download icon for Exterior Wash Pro Family - Firmware Exterior Wash Pro Family - Firmware
版本 1.1.1, 更新: 7月 2026
1.1.1   7月 2026

如果上述任何链接在您的浏览器中显示为奇怪的字符,请右键点击文件以将其保存到您的计算机。

新闻

支援/最常见问题

HARMAN Professional Solutions: