长度:
452 mm (17.8 in.)
宽:
480 mm (18.9 in.) across yoke
高:
755 mm (29.8 in.) maximum
745 mm (29.4 in.) head straight up
重量:
28.5 kg (62.9 lb.)
Minimum center-to-center distance in side-by-side installation:
730 mm (28.8 in.)
Pre-programmed effects:
Two ranges of FX, independent or synchronized/combined
Color mixing:
CMY, independently variable 0 - 100%
Color wheel:
6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color
Iris:
Variable 0 - 100%
Zoom:
Motorized
Color temperature control:
Variable 3000 - 7000 K
Barn doors:
Internal, two blades with individually controllable insertion, +/- 100° module rotation
Dimmer/shutter:
0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout
Dimming options:
Choice of four dimming curves
Pan:
540°
Tilt:
268°
Position correction system:
Absolute position monitoring
Focus:
Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
Setting and addressing:
Control panel with backlit graphic display and jog wheel or via DMX
16-bit control:
Dimming, pan and tilt
Movement control options:
Tracking and vector
DMX channels:
24
Fixture Identification:
User-settable ID number
DMX compliance:
USITT DMX512-A
RDM compliance:
ANSI/ESTA E1.20
Transceiver:
Opto-isolated RS-485
Fixture software update:
USB memory device or over DMX link
Light source:
468 W custom Martin LED engine
Minimum LED lifetime:
50,000 hours (to >80% luminous output)*
Zoom range with Fresnel lens (standard):
14° - 60° one-tenth peak (1:4)
Zoom range with PC lens (optional):
11° - 58° one-tenth peak (1:5)
*Figure obtained under manufacturer's test conditions
Light engine luminous output:
≥ 31,500 lumens
Fixture luminous output with Fresnel lens (standard):
8,500 lumens
Fixture luminous output with PC lens (optional):
9,500 lumens
CRI (Color Rendering Index) :
>90
CQS (Color Quality Scale):
>90
TM-30 Rf (IES TM-30-15 Fidelity Index):
>90
TM-30 Rg (IES TM-30-15 Gamut Index):
>98
TLCI (Television Lighting Consistency Index):
>90
CCT:
3000 K (+/- 250 K)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
Housing:
High-impact flame-retardant thermoplastic
颜色:
Black
Protection rating:
IP20
Mounting points:
4 pairs of 1/4-turn locks
Location:
Dry location only, must be fastened to surface or structure
Orientation:
Any
Minimum distance to combustible materials:
0.2 m (8 in.)
Minimum distance to illuminated surfaces:
2.0 m (6.6 ft.)
AC power input:
Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector)
DMX and RDM data in/out:
5-pin locking XLR
AC power: 120-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
Power Factor: 0.99 @ 120 V / 208 V , 0.98 @ 230 V / 240 V
Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
Power Consumption
Typical: 596 W *
Idle: 64 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
散热:
Combined convection and forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.):
40° C (104° F)
Minimum ambient temperature (Ta min.):
5° C (41° F)
Maximum surface temperature, steady state, at 40° C ambient:
75° C (167° F)
Total heat dissipation (calculated, +/- 10%):
2000 BTU/hr.
RoHS:
Compliant
REACH:
Compliant
WEEE:
Compliant
Proposition 65:
Compliant
Efficacy (max output):
16 lm/w
LWR*:
333 lm/kg (151 lm/lb)
LWR = Lumen-to-Weight Ratio
EU safety:
EN 60598-2-17, EN 62471, EN62493
EU EMC:
EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety:
UL 1573
US EMC:
FCC Part 15 Class A
Canadian safety:
CSA C22.2 No. E598-2-17
Canadian EMC:
ICES-003 Class A
Australia/NZ:
RCM
Thailand:
TIS
Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
Martin Companion Cable:
P/N 91616091
Martin Companion Software Suite (including firmware uploader):
Free download from www.martin.com
Gelframe MAC Encore:
P/N 91001000
Set of Followspot Handles MAC Encore:
P/N 91001001HU
PC Lens Assy MAC Encore Wash:
P/N 91616110HU
SIP Packaging MAC Encore Family:
P/N 91616115HU
Cables and connectors:
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174 Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789
*Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003 Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007 Half-coupler Clamp: P/N 91602005 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
Flightcase:
Two-unit Flightcase for MAC Encore™*: P/N 91515048
Beam Control
MAC Encore Wash Top Hat: P/N City Theatrical 2779
MAC Encore™ Wash WRM EPS (in cardboard box, polystyrene packaging):
P/N 90234025
MAC Encore™ Wash WRM SIP (in cardboard box with SIP foam flightcase insert):
P/N 90234030
MAC Encore™ Wash WRM, white finish, EPS (in cardboard box, polystyrene packaging):
P/N 90234035HU