hjem > produkter > Produktserier > RUSH MH 6 Wash

RUSH MH 6 Wash
Udgået

Kompakt washlight med enkeltlinse og RGBW-farveblanding

RUSH MH 6 Wash

Større billeder

RUSH MH 6 Wash er en spændende videreudvikling af den enormt populære RUSH PAR 2 RGBW Zoom, som anvender samme LED-motor og zoomsystem, men derudover har moving head-funktionalitet. RUSH MH 6 Wash byder på et fuldt formikset farvesystem med 12 x 10 W RGBW-LED'er og en spektakulær 10°–60° zoom. Den tilbyder desuden fuld elektronisk lysdæmpning, stroboskopeffekter og temperaturstyret ventilatorkøling for stille drift.

Lysstærk LED-moving-head-wash-lampe
12 x 10 W RGBW-LED'er
Wash med enkeltlinse og fuldt formiksede farver

Videoer

Funktioner

12 x 10 W Osram Ostar RGBW LED'er
Wash med enkeltlinse og fuldt formikset farve
2.000 lumen lysudbytte
10°–60° zoom
32 forprogrammerede farvemakroer
Temperaturstyret kølesystem
Digital displaymenu
PowerCON ind og gennemgående
3- og 5-pin DMX-muligheder

Specifikationer

Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°

Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display White balance control: RGB adjustment DMX channels: 14 DMX compliance: USITT DMX512/1990

Optics Zoom range: 10° - 60° Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20

Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)

Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM

Included Items
Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
Omega bracket for rigging clamp attachment

Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for connection to power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH MH 6 Wash™ in cardboard box: P/N 90280080

Downloads

Manuals

	Version	Sprog	Størrelse	Uploadet
RUSH MH 6 Wash - Manuel d'utilisation version B, opdateret: maj 2018	B		677 kB	maj 2018
RUSH MH 6 Wash - User Manual version D, opdateret: maj 2018	D		659 kB	maj 2018
RUSH MH 6 Wash - Bedienungsanleitung version A, opdateret: maj 2018	A		903 kB	maj 2018

Photometrics

	Version	Sprog	Størrelse	Uploadet
RUSH MH 6 Wash - Photometric Files version A, opdateret: mar 2024	A		170 kB	mar 2024

Illustrations

	Version	Sprog	Størrelse	Uploadet
RUSH MH 6 Wash - 2D (PDF) version A, opdateret: maj 2018	A		637 kB	maj 2018
RUSH MH 6 Wash - 2D (DWG) version A, opdateret: maj 2018	A		528 kB	maj 2018

Symbols

	Version	Sprog	Størrelse	Uploadet
Vectorworks Symbols version 4.7, opdateret: aug 2026	4.7		286 MB	aug 2026

CAD Drawings

	Version	Sprog	Størrelse	Uploadet
Rush MH 6 Wash - 3D (DWG) version A, opdateret: maj 2018	A		4,85 MB	maj 2018

Compliances

	Version	Sprog	Størrelse	Uploadet
RUSH MH 6 Wash - EU Declaration of Conformity version B, opdateret: mar 2019	B		663 kB	mar 2019
RUSH MH 6 Wash - ETL Listing Verification version A, opdateret: maj 2018	A		381 kB	maj 2018

Service Notes

	Version	Sprog	Størrelse	Uploadet
3D Partsfinder - Opening using Solid Works Composer Player version 4, opdateret: okt 2020	4		743 kB	okt 2020

Tech Notes

	Størrelse	Uploadet
Avoiding damage from sunlight and other light sources opdateret: sep 2017		sep 2017

Hints and Tips

	Version	Sprog	Størrelse	Uploadet
Avoiding damage from sunlight and other light sources version B, opdateret: maj 2018	B			maj 2018

Firmware

	Version	Størrelse	Uploadet
RUSH MH 6 Wash - Firmware version 2.0, opdateret: jul 2026	2.0		jul 2026

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

Nyheder

28. marts 2018
South Korea Lights the Way Through Suyanggae Light Tunnel with Martin By HARMAN
10. januar 2018
The Phillip and Patricia Frost Museum of Science Explores New Frontiers with HARMAN Professional Solutions
21. marts 2016
Martin by HARMAN Lighting Fixtures on Tour with GRAMMY® Award Winner, Ghost

Support/FAQ

HARMAN Professional Solutions:

Konsulentsupport