Τελευταία ενημέρωση: 30 Νοε
CHANGES SINCE 4.0.3:
- Recovers P3-300 System Controller to Software Version 4.1.0
Instructions:
- Power off P3-300 System Controller and remove lid
- Eject SD card located underneath the bottom right of the raised DSP Board
- Insert the SD card into a card reader connected to a computer
- If needed, re-format the SD card (FAT32)
- Download the ZIP file below
- Extract following files from the ZIP file:
* dsp_card.fpga
* reload_fw
* rootfs.tar.gz
* uImage
- Copy the four files above onto the SD card
- Re-insert the SD card into the DSP card
- Close lid
- Power up system
λήψη
