Τελευταία ενημέρωση: 22 Μαϊ
- Recovers P3-050/150/300 System Controller to Software Version 4.4.1
Instructions:
- Power off P3-050/150/300 System Controller and remove lid
- Eject SD card (located underneath the bottom right of the raised DSP Board on P3-300, located at edge of mainboard on P3-050/150)
- Insert the SD card into a card reader connected to a computer
- If needed, re-format the SD card (FAT32)
- Download the ZIP file below
- Extract following files from the ZIP file:
* dsp_card.fpga
* stingray_p3_150.fpga
* reload_fw
* rootfs.tar.gz
* uImage
- Copy the five files above onto the SD card
- Re-insert the SD card into the DSP card
- Close lid
- Power up system
λήψη
