Esta gama de downlights LED empotrables plug-and-play cuenta con mezcla de color RGB+W diseñada para iluminación de acento con luz blanca variable o de color. Con su robusta clasificación IP67, el Alien LED Downlight es igualmente adecuado para entornos interiores y exteriores.
Imágenes más grandes
Características
- 5 o 9 LED en 4 colores: Rojo, Verde, Azul y Blanco
- Opción de 9 vatios estándar o 18 vatios de alta potencia
- Mezcla de color RGBW, temperatura de color variable
- Opción de sistemas ópticos: medio o amplio
- Control de intensidad 0-100%
- Controlado por DMX, a través de Driver Unit
- Opción de modos de control DMX: RGBW, HSI
- Anillos de recorte: acero inoxidable de serie, cromo, blanco o latón como accesorios
- Clasificación a prueba de intemperie: IP67
Más detalles
Physical
Installation depth: 69 mm
Maximum protrusion from mounting surface: 6 mm
Trim ring outer diameter: 85 mm
Diameter of luminaire at widest point: 63 mm
Weight: 330 g incl. cable
Length (transformer): 123 mm
Width (transformer): 50 mm
Height (transformer): 32 mm
Weight (transformer): 385 g incl. cables
Dynamic Effects
Color mixing: RGBW
Red: 0 - 100%
Green: 0 - 100%
Blue: 0 - 100%
White: 0 - 100%
Control and Programming
Required control hardware: Alien LED Downlight Driver Unit (ordered separately, drives up to 20 std. or 10 high-power luminaires)
Color control modes: RGBW, HSI
DMX channels: 4 per independently controlled luminaire or group of luminaires
Protocol: USITT DMX512-A
DMX address setting: DIP switch on Driver Unit
Stand-alone options: 31 pre-programmed static/dynamic scenes/sequences in Driver Unit
Optics
Light source: Luxeon Rebel high power emitters
Total LED power: 9 W (approx.) per standard luminaire, 18 W (appox.) per high-power luminaire
Super-wide lens available:
Construction
Housing: Steel & aluminum
Housing (transformer): Flame-retardant plastic
Trim ring: Brushed stainless (standard), chrome, white or brass
Protection rating: IP67
Protection rating (transformer): IP20
Installation
Location: Recessed, ceiling or wall
Orientation: Any
Minimum clearance around device: 50 mm
Ceiling thickness: 5 mm - 22 mm
Luminaire external thread for retaining nut: 2-inch BSP
Diameter of mounting hole: 70 mm with plasterboard retainer, 63 mm with 2" BSP nut
Max. cable length, driver unit to last transformer on link: 50 m
Max. cable length, driver unit to daisy-chained driver unit: 50 m
Max. cable length, transformer to luminaire: 1.5 m
Connections
Driver Unit combined power & data outputs to transformers: Two IEC female sockets
Power & data input to transformer: 1.5 m cable with IEC male connector (C14 line plug)
Power & data throughput from transformer: 1.5 m cable with IEC female connector (C13 line socket)
Transformer output to luminaire(s): RJ-45 socket
T-connector for use with two standard luminaires: RJ-45 sockets
Electrical
AC power: Supplied by Driver Unit via combined power & data cable
Standby power: Driver unit with 1 head 4 W; Driver unit with 10 heads 14 W
Typical Power and Current
Driver unit with 1 head (1 high-power or 2 standard luminaires):
100-120 V, 50/60 Hz: 18 W, 0.2 A, PF 0.98
208-240 V, 50/60 Hz: 18 W, 0.1 A, PF 0.86
Driver unit with 10 heads (10 high-power or 20 standard luminaires):
100-120 V, 50/60 Hz: 180 W, 1.4 A, PF 0.98
208-240 V, 50/60 Hz: 180 W, 0.8 A, PF 0.96
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal
Cooling: Convection
Maximum ambient temperature (Ta max.): Luminaire 45° C, transformer 40° C
Minimum ambient temperature (Ta min.): Luminaire -25° C, transformer 0° C
Maximum surface temperature, steady state, Ta=45° C: Standard luminaire 80° C, high-power luminaire 85° C, transformer 70° C
Total heat dissipation per head (i.e. one high-power or two standard luminaires), calculated, +/- 10%: 62 BTU/hr.
Approvals
EU safety: BSEN 60598-1, BSEN 60598-2-2 (luminaire), BSEN 61347-1, BSEN 61347-2-13 (transformer)
EU EMC: EN 55 015, EN 55 103, EN 61 000-3
US safety: UL 1598 (luminaire), UL 1310 (transformer)
Canadian safety: CSA C22.2 No. 250 (luminaire), CSA C22.2 No. 223 (transformer)
Included Items
Two standard-power luminaires, one transformer, all cables and connectors (Standard Downlight Set):
One high-power luminaire, one transformer, all cables and connectors (High-Power Downlight Set):
Driver unit, 3-pin male XLR-to-RJ-45 adapter, user manual (Downlight Driver Unit):
Accessories
Chrome trim ring: 91611301
Brass trim ring: 91611302
White trim ring: 91611303
DMX termination plug, RJ-45: 91613028
Ordering Information
Alien LED Standard Downlight Set: 90353000
Alien LED High-Power Downlight Set: 90353040
Alien LED Downlight Driver Unit: 90734510
Descargas
Manuals
| Tamaño | |
Light Fox, Exterior 200 LED, Alien LED Downlight, MAC 700 Profile- Manual de instrucciones
versión C,
actualizado: oct 2020
|
356 KB |
|
|
552 KB |
|
|
708 KB |
|
|
474 KB |
|
|
592 KB |
LC Series, Exterior 200 LED, Alien LED Downlight, Alien LED Driver- Manuel d‘utilisation
versión C,
actualizado: oct 2020
|
1,44 MB |
versión D,
actualizado: may 2018
versión C,
actualizado: may 2018
Compliances
| Tamaño | |
|
|
62,5 KB |
|
|
57,3 KB |
Si alguno de los enlaces anteriores muestra caracteres extraños en su navegador, haga clic con el botón derecho en el archivo para guardarlo en su computadora.
Soporte para Consultores