Ether2DMX8
Descontinuado

Ether2DMX8
Imágenes más grandes

Ether2DMX8 is a highly capable DMX router and much more! As a DMX router, it translates Artnet protocol into DMX in/out universes but can also be used as a DMX merger, DMX splitter hub, fail safe device, cue playback, and DMX viewer monitor. As an extension for the M-Series console it provides 8 DMX ports. When connected to a standalone PC, the Ether2DMX8 also becomes the license key for M-PC and provides 64 DMX Universes.

  • Artnet to DMX – DMX to Artnet conversion
  • 10 Factory and users Presets
  • 99 Cues with Fade Time, Hold Time and Cue Linking

Características

  • Artnet to DMX conversion
  • DMX to Artnet conversion
  • 10 Factory Presets
  • 10 User Presets
  • 99 Cues with Fade Time, Hold Time and Cue Linking
  • 8 Switch Inputs
  • 8 XLR female 5pins
  • DMX Monitor
  • DMX and Artnet Test Generator
  • Multiple Artnet IP in for backup system
  • USB port for backup and firmware update
  • M-PC License with 64 x DMX512

Más detalles

PhysicalLength: 288 mm (11.4 in.)Width: 482.2 mm (19.0 in.), 19-inch rackmountHeight: 43.6 mm (1.8 in.), 1UWeight: 3.6 kg (8.0 lbs.)
Control/User InterfaceFront panel display with 4-button control menu1 x dual-color LED per portMouse & keyboard inputRemote web accessDMX viewer for any physical incoming or outgoing DMX port
Hardware520 MHz processor for fast DMX outputEthernetArt-Net-compliant, Art-Net II-compliantACN-readyBuilt-in webpage for quick access and remote setup10/100 Mbit connection8 portsConfigurable as input or outputOpto-isolated circuit for each portUser-definable DMX timings for each portEach port set as output can be set to constantly repeat the last received DMX frame, or only to output new framesRDM-readyDual-color LED for each port8 open-contact inputsInputs transmit Art-Net-compatible contact closures on the networkContact closures can trigger factory and user presets and start cue playback
Software10 user presets for device configurationM-Series, Maxedia use preset with auto-IP address settingPresets for DMX Hub and Splitter functionalityMergeable setup where multiple inputs are routed in LTP, HTP to one outputPorts assignable to input or outputPorts routable to/from internal ports or to/from any DMX universe on Art-NetPort routing triggerable by contact closure through the use of user presetsDMX channel ranges of ports configurableMerger modules routable between inputs and outputs and/or Art-Net universesChannel ranges can be put in LTP/HTP, copy or fixed value from other channelsAuto or manual IP addressingTracking backup function: automatic handover to another Art-Net signal if one Art-Net signal failsDMX and Art-Net test pattern generatorArt-Net broadcast and unicast compatibleConfiguration files loadable/storable on USB memory sticksFirmware upload via USB memory stick
ConstructionHousing: Steel and aluminumFinish: Electrostatic powder-coated
Installation19-inch rackmount (1U)
Connections10/100 base-T ethernet port: Neutrik locking RJ45 Ethercon socketDMX in/out ports: 8 x 5-pin female XLRBackup, software upload: USBAC power input: 3-pin IEC male socketAC power throughput: 3-pin IEC female socket
ElectricalAC power: Auto-ranging 100 - 240 VAC nominal, 50/60 HzMain fuse: 2 x 500 mA T (slow-blow)
Typical Power and Current100 V, 60 Hz: 220 mAMeasurements made at nominal voltage. Allow for a deviation of +/- 10%.
Ordering InformationEther2DMX8: P/N 90758130

Descargas

Specifications
  Idioma Tamaño Subido
file type icon Ether2DMX8 Spec Sheet-English
en actualizado: oct 2020
en  992 KB oct 2020
Manuals
  Versión Idioma Tamaño Subido
file type icon Ether2DMX8 - User manual
en versión A, actualizado: may 2018
en  3,62 MB may 2018
Compliances
  Versión Idioma Tamaño Subido
file type icon Ether2DMX8- ETL Listing Verification
en versión A, actualizado: may 2018
en  294 KB may 2018
Software
  Versión Idioma Tamaño Subido
file type icon Firmware
en versión 2.02, actualizado: may 2018
2.02  en  1,6 MB may 2018
Service Procedures
  Versión Idioma Tamaño Subido
file type icon Configuration of the DMX ports
en versión A, actualizado: may 2018
en  355 KB may 2018
Service Notes
  Versión Idioma Tamaño Subido
Mandatory firmware upgrade
en versión A, actualizado: may 2018
A   en    may 2018
Trainings
  Versión Idioma Tamaño Subido
file type icon M-Series 05: FX
actualizado: dic 2017
    dic 2017
M-Series 07: Network
en versión A, actualizado: ago 2023
A   en    ago 2023
M-Series 06: Cues and cuelists
en versión A, actualizado: ago 2023
A   en    ago 2023
M-Series 05: FX
en versión A, actualizado: ago 2023
A   en    ago 2023
file type icon M-Series 07: Network
actualizado: dic 2017
    dic 2017
file type icon M-Series 06: Cues and cuelists
actualizado: dic 2017
    dic 2017
Firmware
  Tamaño Subido
download icon for M-Series Firmware Update Program M-Series Firmware Update Program
publicado: jul 2020
369 MB jul 2020
download icon for Ether2DMX8 Firmware Ether2DMX8 Firmware
publicado: dic 2017
1,6 MB dic 2017

Si alguno de los enlaces anteriores muestra caracteres extraños en su navegador, haga clic con el botón derecho en el archivo para guardarlo en su computadora.

Soporte/FAQs

HARMAN Professional Solutions:

Ether2DMX8
Descontinuado