• Physical Length: 258 mm (10.2 in.) Width: 156 mm (6.2 in.) Height: 305 mm (12.0 in.) Weight: 5.7 kg (12.6 lbs.)
  Dynamic Effects Color mixing: RGBW Electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color Electronic dimming: 0 - 100%, four dimming curve options Electronic shutter effect: Strobe effect, pulse effects, instant open and blackout Pan: 540° Tilt: 180°
  Control and Programming Control options: DMX, stand-alone Setting and addressing: Control panel with LCD display Stand-alone options: 4 pre-programmed shows White balance control: RGB adjustment DMX channels: 12 Standalone trigger options: Music trig, auto trig Standalone memory: 20 scenes Protocol: USITT DMX512/1990
  Optics Light source: 7 x 10 W RGBW Cree MC-E LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions.
  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
  Installation Mounting points: Hex bolts Location: Indoor use only, must be fastened to surface or structure Orientation: Any
  Connections AC power in, thru: Neutrik PowerCon DMX in/out: 3-pin and 5-pin locking XLR
• Electrical AC power: 100-240 V nominal, 50/60 Hz Typical total power consumption: 125 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.
  Typical Power and Current 110 V, 60 Hz: 1.9 A, 125 W 230 V, 50 Hz: 1.0 A, 121 W Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
  Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 430 BTU/hr. (at full intensity, full white)
  Approvals EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
  Included Items Bracket for rigging clamp attachment: P/N 50480564 Power cable 1.5 m
  Related Items RUSH® Software Uploader 1: P/N 91611399
  Ordering Information RUSH MH 2 Wash™ in cardboard box: P/N 90280020

ROCK IN RIO 8 POWERS SHOW-STOPPING PERFORMANCES WITH HARMAN PROFESSIONAL SOLUTIONS

• Enregistrez votre RUSH MH 2 Wash
• Contacter l’assistance technique
• Centre d’aide 24/7