Senast uppdaterad: 22 maj
Changes since version 5.0
- Mode setting has a fourth mode, Flux level.
- Possible to set max level on a led (Flux level).
- New dimmer curve.
Implemented:
Status led on the back of the MainPCB
LED1: Shows if the PCB is receiving DMX.
LED2: ON if Flux level is ON, OFF if flux level is OFF.
LED3: Not in use
LED4: Normal run state (after version and calibration).
Only exceptions are at startup and in modesetting & fluxsetting mode
ladda ner
