MAC Encore Wash CLD

High quality cold light soft edge moving head

MAC Encore Wash CLD
Hình ảnh lớn hơn

Designed to produce rich color and premium white light in a wide variety of applications where light quality is critical, the MAC Encore™ Wash CLD is an LED-based alternative to the MAC Viper Wash DX. The feature-packed soft edge moving head offers unparalleled 6000 K crisp, neutral daylight, and doubles as a modern replacement for generic fixtures like HMI based Fresnel fixtures, with the additional benefit of color mixing and movement.

  • Unparalleled 6000 K cold white light quality
  • Super silent cooling and effects operation
  • Best-in-class size/weight/performance ratio

  • CÔNG NGHỆ LED MỚI

    Được thiết kế cho các ứng dụng thực tế, ánh sáng trắng thuần khiết với CCT 6000 K mang lại phổ màu toàn diện nhất hiện có trên một đèn moving head LED soft edge.  Các giá trị CRI, TM-30 và R9 cao đảm bảo tông màu da, trang phục, đạo cụ sân khấu và nhiều chi tiết khác được thể hiện đúng màu sắc thực một cách tự nhiên. Tốc độ làm mới LED được lựa chọn kỹ lưỡng đảm bảo hoạt động không nhấp nháy trong các ứng dụng ghi hình.

  • WHISPER-SILENT

    This is the most silent, soft edge moving head we’ve ever built. All motorized effect operations—cooling fans, barndoors, iris, zoom, pan and tilt—are engineered for applications where strict noise levels are a necessity. Even while running at maximum operation mode, MAC Encore Wash CLD is still a stealth operator. 

  • COLOR PALETTE

    Precise color temperature control with variable color temperature correction (CTO) that stays true to the black body curve without green or magenta shifts. Accurate control and smooth adjustment options to match the color temperature of other light sources on the set or stage. Vibrant CMY color mixing from light and smooth pastels to rich, saturated primaries. 

  • OPTICS

    A diffused wash field optical system with no color temperature variation while zooming or dimming ensures even light and color temperature distribution across the beam from high to low intensity for perfect control. Its Fresnel lens offers Gaussian diffusion and its ultra-fast, precise, and super silent 1:4 zoom allows for both high and low ceiling usage that spans from tight beams to wide coverage. A PC lens with 1:5 zoom ratio for tighter beam and longer throw is available as an optional accessory.

  • INTERNAL BARNDOORS

    Brightest-in-class LED wash light with internal barndoor system. Two internal overlapable shutter blades allow for full blackout and the entire system rotates +/- 100°. When combined with its ultra-precise and tight iris you can effectively crop the beam’s wide axis to precisely frame the lit area and repeat cues with great precision similar to a studio Fresnel with barndoors.

  • STURDY, LIGHTWEIGHT DESIGN

    With its best-in-class compact design and premium build-quality, MAC Encore Wash CLD lives up to Martin’s tour-proven standards. Its slick form factor offers the highest lumen per kg/lb ratio of its class. Combined, you get the lightest and finest fixture on the market (28.5 kg/62.9 lbs.)

featured content

CÔNG NGHỆ LED MỚI

Được thiết kế cho các ứng dụng thực tế, ánh sáng trắng thuần khiết với CCT 6000 K mang lại phổ màu toàn diện nhất hiện có trên một đèn moving head LED soft edge.  Các giá trị CRI, TM-30 và R9 cao đảm bảo tông màu da, trang phục, đạo cụ sân khấu và nhiều chi tiết khác được thể hiện đúng màu sắc thực một cách tự nhiên. Tốc độ làm mới LED được lựa chọn kỹ lưỡng đảm bảo hoạt động không nhấp nháy trong các ứng dụng ghi hình.

featured content

WHISPER-SILENT

This is the most silent, soft edge moving head we’ve ever built. All motorized effect operations—cooling fans, barndoors, iris, zoom, pan and tilt—are engineered for applications where strict noise levels are a necessity. Even while running at maximum operation mode, MAC Encore Wash CLD is still a stealth operator. 

featured content

COLOR PALETTE

Precise color temperature control with variable color temperature correction (CTO) that stays true to the black body curve without green or magenta shifts. Accurate control and smooth adjustment options to match the color temperature of other light sources on the set or stage. Vibrant CMY color mixing from light and smooth pastels to rich, saturated primaries. 

featured content

OPTICS

A diffused wash field optical system with no color temperature variation while zooming or dimming ensures even light and color temperature distribution across the beam from high to low intensity for perfect control. Its Fresnel lens offers Gaussian diffusion and its ultra-fast, precise, and super silent 1:4 zoom allows for both high and low ceiling usage that spans from tight beams to wide coverage. A PC lens with 1:5 zoom ratio for tighter beam and longer throw is available as an optional accessory.

featured content

INTERNAL BARNDOORS

Brightest-in-class LED wash light with internal barndoor system. Two internal overlapable shutter blades allow for full blackout and the entire system rotates +/- 100°. When combined with its ultra-precise and tight iris you can effectively crop the beam’s wide axis to precisely frame the lit area and repeat cues with great precision similar to a studio Fresnel with barndoors.

featured content

STURDY, LIGHTWEIGHT DESIGN

With its best-in-class compact design and premium build-quality, MAC Encore Wash CLD lives up to Martin’s tour-proven standards. Its slick form factor offers the highest lumen per kg/lb ratio of its class. Combined, you get the lightest and finest fixture on the market (28.5 kg/62.9 lbs.)

Video

 

 

Tính năng

  • Pure white LED engine with 6000 K CCT.
  • No color temperature variation during zoom and dimming.
  • Flicker-free operation—LED driver frequency suitable for all camera applications.
  • Whisper-silent—Combines convection and forced air cooling with user-selectable output vs. sound level control.
  • Fully electronic dimmer/shutter control with various dimming curves and tungsten red-shift emulation.
  • Vibrant CMY color mixing with a superior palette of colors ranging from rich, saturated primary colors to light and smooth pastel shades.
  • Variable CTO—daylight to tungsten CCT control and expansion of the CMY palette that stays true to the black body curve.
  • Color wheel—6 interchangeable dichroic filters + open.
  • Fresnel lens: 1:4 zoom—precise, silent and fast zoom.
  • PC lens (optional): 1:5 zoom—precise, silent and fast zoom.
  • Internal barndoor system with two shutter blades and iris. Shutter blades can overlap for full blackout and the entire system rotates +/- 100°. Repeats cues with great precision.
  • Precise and tight iris with adjustable dynamic effects.
  • Animotion™ FX System—Internal dimming effect macros for stunning 3D mid-air and projection effects.
  • Super precise and silent pan/tilt movement and positioning due to 3-phase stepper motor technology and absolute position monitoring.
  • Compact size—L: 452 x W: 480 x H: 745 mm / L: 17.8 x W: 18.9 x H: 29.3 in.
  • Low weight—28.5 kg/62.9 lbs
  • Foam rubber (SIP) flight case insert for secure shipment. 

Thông số kỹ thuật

  • Physical Length: 452 mm (17.8 in.) Width: 480 mm (18.9 in.) across yoke Height:

    755 mm (29.8 in.) maximum
    745 mm (29.4 in.) head straight up

     Weight: 28.5 kg (62.9 lb.) Minimum center-to-center distance in side-by-side installation: 730 mm (28.8 in.)
    Dynamic Effects Pre-programmed effects: Two ranges of FX, independent or synchronized/combined Color mixing: CMY, independently variable 0 - 100% Color wheel: 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random color Iris: Variable 0 - 100% Zoom: Motorized Color temperature control: Variable 6000 - 2700 K Barn doors: Internal, two blades with individually controllable insertion, +/- 100° module rotation Dimmer/shutter: 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout Dimming options: Choice of four dimming curves Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring Focus: Range varies with zoom angle, from approx. 2 m (6.6 ft.) / 6 m (19.7 ft.) to infinity
    Control and Programming Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX 16-bit control: Dimming, pan and tilt Movement control options: Tracking and vector DMX channels: 24 Fixture Identification: User-settable ID number DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Fixture software update: USB memory device or over DMX link
    Optics Light source: 468 W custom Martin LED engine Minimum LED lifetime: 50,000 hours (to >80% luminous output)* Zoom range with Fresnel lens (standard): 14° - 60° one-tenth peak (1:4) Zoom range with PC lens (optional): 11° - 58° one-tenth peak (1:5) *Figure obtained under manufacturer's test conditions
    Photometric Data Light engine luminous output: ≥ 39,400 lumens Fixture luminous output with Fresnel lens (standard): 11,000 lumens Fixture luminous output with PC lens (optional): 12,000 lumens CRI (Color Rendering Index) : >80 CQS (Color Quality Scale): >80 TM-30 Rf (IES TM-30-15 Fidelity Index): >80 TM-30 Rg (IES TM-30-15 Gamut Index): >96 TLCI (Television Lighting Consistency Index): >70 CCT: 6000 K (+/- 250 K)

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.
    Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
    Installation Mounting points: 4 pairs of 1/4-turn locks Location: Dry location only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (8 in.) Minimum distance to illuminated surfaces: 2.0 m (6.6 ft.)
    Connections AC power input: Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out: 5-pin locking XLR
  • Electrical

    AC power: 120-240 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 10.3 A
    Power Factor: 0.99 @ 120 V / 208 V , 0.98 @  230 V / 240 V
    Typical current draw: 5.0 A @ 120 V , 2.9 A @ 208 V , 2.6 A @ 230 V , 2.2 A @ 240 V *
    Power Consumption
    Typical: 596 W *
    Idle: 64 W *
    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Typical: full output white, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.
    Thermal Cooling: Combined convection and forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F) Total heat dissipation (calculated, +/- 10%): 2000 BTU/hr.
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 17 lm/w LWR*: 386 lm/kg (175 lm/lb)

    LWR = Lumen-to-Weight Ratio
    Approvals EU safety: EN 60598-2-17, EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-11, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: RCM Thailand: TIS
    Included Items Two omega brackets with 1/4 turn fasteners for rigging clamp attachment
    Related Items Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Gelframe MAC Encore: P/N 91001000 Set of Followspot Handles MAC Encore: P/N 91001001HU PC Lens Assy MAC Encore Wash: P/N 91616110HU SIP Packaging MAC Encore Family: P/N 91616115HU Cables and connectors:

    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
    Power Input Cable, H07RN-F, 2.5 mm2, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
    Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
    Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789

     *Please order SIP variant fixtures to obtain the required SIP foam flightcase inserts Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler Clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

     Flightcase: Two-unit Flightcase for MAC Encore™*: P/N 91515048
    Verified Third-Party Accessories

    Beam Control
    MAC Encore Wash Top Hat: P/N City Theatrical 2779
    Ordering Information MAC Encore™ Wash CLD EPS (in cardboard box, polystyrene packaging): P/N 90234040 MAC Encore™ Wash CLD SIP (in cardboard box with SIP foam flightcase insert): P/N 90234045 MAC Encore™ Wash CLD, white finish, EPS (in cardboard box, polystyrene packaging): P/N 90234050HU

Tải xuống

Specifications
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore - SiP data sheet
en phiên bản B, cập nhật: Thg 10 2020
B  en  1 MB Thg 10 2020
file type icon MAC Encore Wash - Spec sheets
en phiên bản A, cập nhật: Thg 10 2020
A  en  2 MB Thg 10 2020
Manuals
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore Wash - Safety and Installation Manual
en phiên bản D, cập nhật: Thg 10 2018
D  en  5 MB Thg 10 2018
file type icon MAC Encore Wash - Manuel d'Installation et Sécurité
fr phiên bản C, cập nhật: Thg 10 2018
C  fr  2 MB Thg 10 2018
file type icon MAC Encore Wash - Sicherheits- und Installationshinweise
de phiên bản C, cập nhật: Thg 10 2018
C  de  2 MB Thg 10 2018
file type icon MAC Encore Wash - User Guide
en phiên bản C, cập nhật: Thg 5 2023
C  en  600 KB Thg 5 2023
file type icon MAC Encore Wash - Bedienungsanleitung
de phiên bản C, cập nhật: Thg 5 2023
C  de  400 KB Thg 5 2023
file type icon MAC Encore Wash - Guide de l'Utilisateur
fr phiên bản B, cập nhật: Thg 10 2020
B  fr  300 KB Thg 10 2020
Photometrics
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore Wash - Photometric files
en phiên bản A, cập nhật: Thg 10 2021
A  en  10 MB Thg 10 2021
Illustrations
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore Wash - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
A  en  4 MB Thg 10 2020
file type icon MAC Encore Wash - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
A  en  200 KB Thg 10 2020
Symbols
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Martin Professional GDTF Library
en phiên bản A, cập nhật: Thg 10 2023
A  en  203 Byte Thg 10 2023
file type icon AutoCAD 2D Symbols
en phiên bản 2.9, cập nhật: Thg 8 2026
2.9  en  5 MB Thg 8 2026
file type icon AutoCAD 3D Symbols
en phiên bản 2.9, cập nhật: Thg 8 2026
2.9  en  20 MB Thg 8 2026
file type icon Vectorworks Symbols
en phiên bản 4.7, cập nhật: Thg 8 2026
4.7  en  300 MB Thg 8 2026
CAD Drawings
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore Wash - 3D dimensions, head horizontal (DWG)
en phiên bản A, cập nhật: Thg 10 2020
A  en  10 MB Thg 10 2020
file type icon MAC Encore Wash - 3D dimensions, head horizontal (3DS)
en phiên bản A, cập nhật: Thg 10 2020
A  en  10 MB Thg 10 2020
file type icon MAC Encore Wash - 3D dimensions, head vertical (DWG)
en phiên bản A, cập nhật: Thg 10 2020
A  en  8 MB Thg 10 2020
file type icon MAC Encore Wash - 3D dimensions, head vertical (3DS)
en phiên bản A, cập nhật: Thg 10 2020
A  en  10 MB Thg 10 2020
BIM Objects
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon MAC Encore Wash CLD - BIM Object
en phiên bản A, cập nhật: Thg 4 2024
A  en  Thg 4 2024
Compliances
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Safety Document (SDS) for Batteries
en phiên bản D, cập nhật: Thg 1 2026
D  en  300 KB Thg 1 2026
file type icon MAC Encore Series - ETL Listing Verification
phiên bản A, cập nhật: Thg 10 2020
A    400 KB Thg 10 2020
file type icon MAC Encore Wash - Déclaration de Conformité Européenne
fr phiên bản A, cập nhật: Thg 10 2020
A  fr  500 KB Thg 10 2020
file type icon MAC Encore Wash - EU Declaration of Conformity
en phiên bản A, cập nhật: Thg 10 2020
A  en  400 KB Thg 10 2020
Service Notes
  Phiên bản Kích thước Đã tải lên
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
phiên bản 4, cập nhật: Thg 10 2020
4  700 KB Thg 10 2020
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for MAC Encore Wash - Firmware MAC Encore Wash - Firmware
phiên bản 1.6.1, cập nhật: Thg 9 2026
1.6.1   Thg 9 2026

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Tin tức

Hỗ trợ/FAQ

HARMAN Professional Solutions:
ffind_dealer
hhave_question
cHỗ trợ Tư vấn viên

MAC Encore Wash CLD

High quality cold light soft edge moving head

HARMAN Professional Solutions:
ffind_dealer
hhave_question
cHỗ trợ Tư vấn viên