Exterior Wash 300
Ngừng sản xuất

Đèn wash color mixing RGBW có chứng chỉ sử dụng ngoài trời

Exterior Wash 300
Hình ảnh lớn hơn

Số lượng có hạn – vui lòng liên hệ với nhà phân phối của bạn để biết thêm thông tin

Exterior Wash™ 300 là một thiết bị chiếu sáng LED mạnh mẽ, nhỏ gọn và tiết kiệm năng lượng được thiết kế để chiếu sáng các công trình lớn, mặt tiền tòa nhà và cầu. Một snoot tùy chọn rời rạc tích hợp liền mạch với thiết kế bề ngoài của các thiết bị. Nó có màn hình hiển thị tích hợp để dễ sử dụng, có nhiều lựa chọn góc chiếu sáng và được đánh giá IP đầy đủ cho việc sử dụng ngoài trời vĩnh viễn.

Exterior Wash 300 được thiết kế cho các ứng dụng tia hẹp và dựa trên các LED riêng biệt cho màu đỏ, xanh lục, xanh lam và trắng

Tìm hiểu thêm về xác minh sản phẩm và độ tin cậy của chúng tôi

  • Cấu hình tia hẹp với 6 lựa chọn góc chiếu sáng
  • Snoot tùy chọn rời rạc chức năng tích hợp với thiết kế của các thiết bị
  • Điều khiển thông qua DMX, RDM và màn hình OLED

Video

 

 

Tính năng

  • LED đơn màu R, G, B, W mạnh mẽ
  • Lên đến 10.300 lumens ở chế độ trắng toàn phần (RGBW)
  • Sáu tùy chọn góc chiếu khác nhau
  • Điều khiển và cấp nguồn nội bộ (DMX, RDM và màn hình OLED)
  • Vỏ chắc chắn IP66
  • Điều chỉnh cường độ 0 – 100%

Thông số kỹ thuật

  • Physical Length: 283 mm (11.2 in.) Width: 404 mm (15.9 in.) Height: 439 mm (17.3 in.) Weight: 19.0 kg (42.0 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending DMX mode Receiver: RS-485 DMX compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 26 x R, 28 x G, 22 x B and 28 x W single-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 25°
    Wide diffuser: 41°
    Very wide diffuser: 59°
    Asymmetric diffuser: 65° x 14.5°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 10300 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.14 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 6 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.9 A Maximum total power consumption: 280 W Surge protection: 4 KV Max earth leakage: 0.25 mA
    Typical Power and Current 100 V, 60 Hz: 2.6 A, 252 W, PF 0.99 120 V, 60 Hz: 2.1 A, 250 W, PF 0.99 230 V, 50 Hz: 1.1 A, 242 W, PF 0.97 277 V, 60 Hz: 1.0 A, 242 W, PF 0.94 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 43 lm/W LWR*: 542 lm/kg (245 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 300 Series, narrow diffuser kit: P/N 91610155 Exterior Wash 300 Series, medium diffuser kit: P/N 91610156 Exterior Wash 300 Series, wide diffuser kit: P/N 91610157 Exterior Wash 300 Series, very wide diffuser kit: P/N 91610158 Exterior Wash 300 Series, asymmetric diffuser kit: P/N 91610159 Exterior Wash 300 Series, glare shield / snoot: P/N 91611735 Exterior Wash 300 Honeycomb Louvre: P/N 91611858
    Ordering Information Exterior Wash 300, 7°, EU, aluminum: P/N 90507070 Exterior Wash 300, 7°, US, aluminum: P/N 90507071

Tải xuống

Specifications
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 300 Spec Sheet-English
en phiên bản B, cập nhật: Thg 11 2018
en  1000 KB Thg 11 2018
file type icon Exterior Wash System Diagrams
en phiên bản B, cập nhật: Thg 10 2020
en  300 KB Thg 10 2020
Manuals
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 300 Series - User Manual
en phiên bản L, cập nhật: Thg 12 2020
en  3 MB Thg 12 2020
file type icon Exterior Wash 300 Serie - Bedienungsanleitung
de phiên bản A, cập nhật: Thg 10 2020
de  900 KB Thg 10 2020
file type icon Exterior Wash 300 Series - Manuel d'utilisation
fr phiên bản B, cập nhật: Thg 10 2020
fr  700 KB Thg 10 2020
Photometrics
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 300 - Photometrics files
en phiên bản A, cập nhật: Thg 3 2024
en  600 KB Thg 3 2024
Illustrations
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 300 Series (With-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  3 MB Thg 10 2020
file type icon Exterior Wash 300 Series (no-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  10 MB Thg 10 2020
file type icon Exterior Wash 300 Series (no-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  3 MB Thg 10 2020
file type icon Exterior Wash 300 Series (With-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  20 MB Thg 10 2020
Symbols
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon AutoCAD 2D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  4 MB Thg 1 2026
file type icon AutoCAD 3D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  20 MB Thg 1 2026
file type icon Vectorworks Symbols
en phiên bản 4.6, cập nhật: Thg 1 2026
4.6  en  200 MB Thg 1 2026
CAD Drawings
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en phiên bản A, cập nhật: Thg 5 2018
en  60 MB Thg 5 2018
Compliances
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 300 Series - EU Declaration of Conformity
en phiên bản A, cập nhật: Thg 10 2020
en  90 KB Thg 10 2020
file type icon Exterior Wash Series - ETL Listing Verification
en phiên bản B, cập nhật: Thg 5 2018
en  300 KB Thg 5 2018
  400 KB Thg 5 2018
Service Notes
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
phiên bản 4, cập nhật: Thg 10 2020
  700 KB Thg 10 2020
file type icon Exterior products - Performing a vacuum test - Tech note
en phiên bản H, cập nhật: Thg 10 2020
en  1000 KB Thg 10 2020
EW series Incorrect warning print
cập nhật: Thg 5 2018
      Thg 5 2018
Tech Notes
  Kích thước Đã tải lên
file type icon EW-Series UV Warning Printing
cập nhật: Thg 1 2018
Thg 1 2018
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for Exterior Wash 300 - Firmware Exterior Wash 300 - Firmware
phiên bản 2.1.0, cập nhật: Thg 6 2026
2.1.0   Thg 6 2026

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Tin tức

HARMAN Pro Insights

Why the World’s Most Iconic Cruise Lines Trust Martin Lighting to Go Far Beyond feature

Why the World’s Most Iconic Cruise Lines Trust Martin Lighting to Go Far Beyond

What is the ideal commercial lighting package for an entertainment venue, typically in motion, facing the toughest weather conditions, including extreme sun, wind, rain, salt, mist and vibrations? When it comes to outfitting luxury cruise ships with the latest innovations in entertainment and architectural lighting,

CONTINUE READING

Hỗ trợ/FAQ