Exterior Wash 300

Larger Images

Exterior Wash™ 300 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate large structures, building facades and bridges. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 300 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white

  • Narrow beam configuration with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

Videos

Exterior Wash

 

Features

  • Powerful single color R,G,B,W LEDs
  • Up to 10.300 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0 – 100% intensity control

Specifications

  • Physical Height: 439 mm (17.3 in.) Length: 283 mm (11.2 in.) Weight: 19.0 kg (42.0 lbs.) Width: 404 mm (15.9 in.) Dynamic Effects Color mixing: RGBW Intensity: 0 - 100% Control and Programming Control systems: DMX, RDM Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending DMX mode Receiver: RS-485 Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A Optics Light source: 26 x R, 28 x G, 22 x B and 28 x W single-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 25°
    Wide diffuser: 41°
    Very wide diffuser: 59°
    Asymmetric diffuser: 65° x 14.5°

    *Figure obtained under manufacturer's test conditions Photometric Data Total luminous output: 10300 lumens Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.14 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) RoHS compliant Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.) Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 6 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.9 A Maximum total power consumption: 280 W Surge protection: 4 KV Typical Power and Current 100 V, 60 Hz: 2.6 A, 252 W, PF 0.99 120 V, 60 Hz: 2.1 A, 250 W, PF 0.99 230 V, 50 Hz: 1.1 A, 242 W, PF 0.97 277 V, 60 Hz: 1.0 A, 242 W, PF 0.94 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%. Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 945 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Approvals EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM Included Items Cover plate for control panel Accessories Exterior Wash 300 Series, narrow diffuser kit: P/N 91610155 Exterior Wash 300 Series, medium diffuser kit: P/N 91610156 Exterior Wash 300 Series, wide diffuser kit: P/N 91610157 Exterior Wash 300 Series, very wide diffuser kit: P/N 91610158 Exterior Wash 300 Series, asymmetric diffuser kit: P/N 91610159 Exterior Wash 300 Series, glare shield / snoot: P/N 91611735 Exterior Wash 300 Honeycomb Louvre: P/N 91611858 Related Items Martin Companion Cable: P/N 91616091 Ordering Information Exterior Wash 300, 7°, EU, aluminum: P/N 90507070 Exterior Wash 300, 7°, US, aluminum: P/N 90507071

Downloads

  Version Language Size Uploaded
Specifications
Exterior Wash 300 Spec Sheet-English en  994 KB Nov 30, 2018
Manuals
Exterior Wash 300 Series - User Manual en  3.07 MB Dec 04, 2018
Exterior Wash 300 Serie - Bedienungsanleitung de  949 KB Mar 14, 2016
Exterior Wash 300 Series - Manuel d'utilisation fr  704 KB Mar 31, 2016
Illustrations
Exterior Wash 300 Series (With-snoot) - 2D dimensions (DWG) en  16.4 MB Oct 08, 2018
Exterior Wash 300 Series (With-snoot) - 2D dimensions (PDF) en  3.28 MB Oct 08, 2018
Exterior Wash 300 Series (no-snoot) - 2D dimensions (DWG) en  10.9 MB Oct 08, 2018
Exterior Wash 300 Series (no-snoot) - 2D dimensions (PDF) en  2.59 MB Oct 08, 2018
3D Symbols
Vectorworks Symbols 2.6  en  66.4 MB May 01, 2019
CAD Drawings
Exterior Wash Series 3D (3DS-STEP-DWG) en  56.5 MB Jan 18, 2016
Compliances
Exterior Wash Series - ETL Listing Verification en  349 KB Jan 20, 2017
Exterior Wash Series - Product Verification and Reliability Report   407 KB Nov 17, 2017
Exterior Wash 300 Series - EU Declaration of Conformity en  95 KB Oct 14, 2016
Software
Exterior Wash 300 SW V1.0 en  58.5 KB Sep 30, 2016
EXTERIOR WASH 300 Firmware 1.2.0    75.5 KB Jan 17, 2018
Service Notes
EW series Incorrect warning print       Oct 21, 2016
Exterior products - Performing a vacuum test - Tech note en  1.9 MB May 01, 2017
Tech Notes
EW-Series UV Warning Printing     Jan 17, 2018

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Support/FAQs