Exterior Linear Pro Graze CTC

户外线性投光灯具,带色温控制

Exterior Linear Pro Graze CTC

Martin Exterior Linear Pro Graze CTC lights are flexible, compact, LED-based architectural fixtures. Delivering uniform light distribution at a 9 degree beam angle, they are ideal for highlighting textured surfaces, walls, facades, ceilings and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other permanent indoor or outdoor locations.

Featuring highly efficient color temperature control (2700K, 4000K, 6500K), a high color rendering index (CRI) and 12 LEDs/ft, Graze CTC models deliver robust output of 800 lm/ft. Packed with intelligent features, Graze CTC lights include multiple power modes, Remote Device Management (RDM), simple-to-adjust total lumen output for low power requirements, DMX-controllability, and easy installation via the integrated universal power supply.

With a high focus on sustainability, these fixtures can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design allows for a range of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

  • EASE OF INSTALLATION

    The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

  • SMART INFRASTRUCTURE

    Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

  • SUPERIOR COLOR TEMPERATURE CONTROL

    Cold, neutral, and warm LEDs are included for precise color temperature control from 2700K to 6500K at high efficacy with 12 LEDs/ft. They also feature a high color rendering index (CRI) covering the entire color temperature spectrum.

  • EFFICIENT OPERATION

    With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

featured content

EASE OF INSTALLATION

The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

featured content

SMART INFRASTRUCTURE

Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

featured content

SUPERIOR COLOR TEMPERATURE CONTROL

Cold, neutral, and warm LEDs are included for precise color temperature control from 2700K to 6500K at high efficacy with 12 LEDs/ft. They also feature a high color rendering index (CRI) covering the entire color temperature spectrum.

featured content

EFFICIENT OPERATION

With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

视频

 

 

特点

  • Warm, neutral and cold white LEDs (2700K, 4000K, 6500K) (12 LEDs/ft)
  • Narrow 9° beam angle
  • Interchangeable micro lens film for alternative beam angles
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • 5W/ft power mode meets ASHRAE standards for linear facade lighting 
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width

性能

  • 物理特性 宽: 40 mm (1.57 inch.) 高: 68 mm (2.67 inch) Length - 1 ft Version: 312mm (1.02 ft) Length - 4 ft Version: 1227mm (4.02 ft) Weight - 1 ft Version: 0.85 kg (1.9 lbs) Weight - 4 ft Version: 2.8 kg (6.2 lbs)
    Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K – 6500 K Segment Control: 0.5ft, 1 ft or full 4 ft fixture control
    Control and Programming Control systems: DMX, RDM User interface: Magnetic button to call up fixture status and test fixture Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX individual color control Dimmer Resolution: 16-bit DMX control of intensity DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX channels 4ft: 3/3/12/24 (standard/1 seg/4 seg/8 seg) DMX channels 1ft: 3/6/3 (standard/1 seg/2 seg)
    Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse) Beam angle**: 9°, 9°x 30° , 9°x 60°
    *Figure obtained under manufacturer's test conditions
    ** Asymmetric beam angles available as accessory micro-lens films
    Photometric Data CRI (Color Rendering Index) : >70 (higher CRI available on request) CCT: 2700K - 6500K Luminous output:
      1 ft at 12W 4 ft at 48W
    2700K: 790 lumens 3390 lumens
    4000K: 900 lumens 3730 lumens
    6500K: 850 lumens 3600 lumens
    Construction Housing: Aluminum 外观颜色: Clear anodized (standard) or white (optional) Front: Clear polycarbonate Protection rating: IP66 IK rating: IK08 Effective Projected Area (EPA): 0.04 m2 per ft Corrosion resistance: C5 - very high corrosivity / Durability Range: High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    Installation Orientation: Any Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.
  • Connections

    Power/data in/thru: 8-pin custom connectors
    Surge Protection: 4 KV
    Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
    Maximum total string length (cable + fixtures)*: 150 m / 328 ft
    * Refer to system diagram for details on fixture run limitations.

    Electrical

    AC power: 100-277 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A                   
    Typical earth-leakage current 1 ft: 0.15 mA
    Typical earth-leakage current 4 ft: 0.21 mA
    Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
    Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

    Power Consumption 1 ft
    Maximum: 12 W / 10 W / 5 W *
    Idle: 1.54 W *

    Power Consumption 4 ft
    Maximum: 48 W / 40 W / 20 W *
    Idle: 2.30 W *

    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Idle: steady state, all LEDs at zero intensity.
    Power Consumption: Depending on power setting mode.

    Thermal 散热: Convection Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)
    *Above this temperature, the fixture regulates output to protect from overheating
    Maximum total heat dissipation, calculated, +/- 10%: 41 BTU/hr. per foot
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging Efficacy (max output): 75 lm/W LWR*: 1059 lm/kg (474 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Related Items Martin Companion Cable: P/N MAR-91616091 Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
    Accessories

    Beam control
    Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022
    Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023
    Louvre, EL Pro CTC, 1ft set of 4: P/N MAR-90570028
    Asymm diffuser Wide EL Pro 4ft, set of 6: P/N MAR-90570020
    Asymm diffuser Narrow EL Pro 4ft, set of 6: P/N MAR-90570021

    Mounting brackets
    Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025
    Flange bracket EL Pro 10 pcs: MAR-90570026
    Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027

    Pre-assembled PD Hybrid Power DMX cables
    Power DMX Cable PD PD 0.2M: P/N MAR-91700004
    Power DMX Cable PD PD 1M EU: MAR-91700005
    Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006
    Power DMX Cable PD PD 5M EU: P/N MAR-91700007
    Power DMX Cable PD PD 10M EU: P/N MAR-91700008
    Power DMX Cable PD PD 0.2M US: P/N MAR-91700010
    Power DMX Cable PD PD 1M US: P/N MAR-91700011
    Power DMX Cable PD PD 2.5M US: P/N MAR-91700012
    Power DMX Cable PD PD 5M US: P/N MAR-91700013
    Power DMX Cable PD PD 10M US: P/N MAR-91700014

    Bulk Hybrid Power DMX Cables and Connectors
    Power DMX Cable 100M Roll EU: P/N MAR-91700009
    Power DMX Cable 100M Roll US: P/N MAR-91700016
    Field installable connector PD female: P/N MAR-91700017
    Field installable connector PD male: P/N MAR-91700018

    Junction box and End Termination Cap, Multitool
    End termination cap PD: P/N MAR-91700015
    Junction Box Power DMX to PD: P/N MAR-91700019
    Exterior Multitool: P/N MAR-90590025

    Ordering Information Exterior Linear Pro graze CTC 1ft: P/N MAR-90570006 Exterior Linear Pro graze CTC 4ft: P/N MAR-90570008

下载

Specifications
  版本 语言 大小 上传日期
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en 版本 B, 更新: 7月 2025
en  957.7 KB 7月 2025
file type icon Exterior Linear Pro System Diagram
en 版本 D, 更新: 1月 2026
en  1.1 MB 1月 2026
file type icon Exterior Linear Pro Graze CTC Spec Sheet
en 版本 F, 更新: 1月 2026
en  1.3 MB 1月 2026
en  82.8 KB 12月 2022
Manuals
  版本 语言 大小 上传日期
en  2.2 MB 7月 2023
de  2.0 MB 7月 2023
fr  2.1 MB 7月 2023
Brochures
  语言 大小 上传日期
en  6.8 MB 10月 2024
Photometrics
  版本 语言 大小 上传日期
file type icon Exterior Linear Pro Graze CTC Photometrics
en 版本 B, 更新: 4月 2023
en  18.2 MB 4月 2023
Illustrations
  版本 语言 大小 上传日期
file type icon Junction Box - 2D dimensions (PDF)
en 版本 A, 更新: 10月 2022
en  237.7 KB 10月 2022
en  1.3 MB 6月 2024
en  6.8 MB 6月 2024
file type icon Junction Box - 2D dimensions (DWG)
en 版本 A, 更新: 10月 2022
en  1.2 MB 10月 2022
Symbols
  版本 语言 大小 上传日期
file type icon AutoCAD 2D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  4.4 MB 1月 2026
file type icon AutoCAD 3D Symbols
en 版本 2.8, 更新: 1月 2026
2.8  en  18.7 MB 1月 2026
file type icon Martin Professional GDTF Library
en 版本 A, 更新: 10月 2023
en  203 字节 10月 2023
file type icon Vectorworks Symbols
en 版本 4.6, 更新: 1月 2026
4.6  en  248.9 MB 1月 2026
CAD Drawings
  版本 语言 大小 上传日期
file type icon Exterior Linear Pro Graze-Cove - 3DS
en 版本 B, 更新: 3月 2025
en  5.9 MB 3月 2025
file type icon Junction Box - 3D DWG
en 版本 B, 更新: 1月 2024
en  5.1 MB 1月 2024
file type icon Junction Box - 3DS
en 版本 B, 更新: 1月 2024
en  8.5 MB 1月 2024
file type icon Exterior Linear Pro Graze-Cove - 3D DWG
en 版本 B, 更新: 3月 2025
en  13.7 MB 3月 2025
BIM Objects
  版本 语言 大小 上传日期
file type icon Exterior Linear Pro Graze CTC - BIM Object
en 版本 A, 更新: 11月 2023
en  11月 2023
Compliances
  版本 语言 大小 上传日期
file type icon Exterior Linear Pro - CB Test Certificate
en 版本 B, 更新: 1月 2024
en  252.1 KB 1月 2024
en  279.9 KB 3月 2023
en  279.2 KB 3月 2023
en  589.8 KB 3月 2023
en  418.7 KB 11月 2023
Service Notes
  版本 语言 大小 上传日期
file type icon Assembly instruction for PD hybrid connectors
en 版本 A, 更新: 1月 2025
en  5.2 MB 1月 2025
Firmware
  版本 大小 上传日期
download icon for Exterior Linear Pro Family - Firmware Exterior Linear Pro Family - Firmware
版本 1.2.1, 更新: 5月 2026
1.2.1   5月 2026

如果上述任何链接在您的浏览器中显示为奇怪的字符,请右键点击文件以将其保存到您的计算机。

新闻

支援/最常见问题

HARMAN Professional Solutions:

Exterior Linear Pro Graze CTC

户外线性投光灯具,带色温控制


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - 4KV  Martin Warranty - IK08