Exterior Linear Pro Graze CTC

مصباح إضاءة خطي خارجي مع التحكم في درجة حرارة اللون

Exterior Linear Pro Graze CTC

تعتبر أضواء Martin Exterior Linear Pro Graze CTC تركيبات معمارية مرنة، مدمجة، تعتمد على LED. تقدم توزيعاً ضوئياً موحداً بزاوية شعاع 9 درجات، مما يجعلها مثالية لتسليط الضوء على الأسطح المنقوشة، والجدران، والواجهات، والأسقف، وغيرها من الأسطح في الملاعب، والسفن السياحية، والمنتجعات الترفيهية، والفنادق، والكازينوهات، والجسور، والأنفاق أو المواقع الداخلية أو الخارجية الدائمة.

مع ميزات تحكم عالية الكفاءة لدرجة حرارة اللون (2700K، 4000K، 6500K)، ومؤشر تجسيد لون مرتفع (CRI) و12 LED/قدم، توفر نماذج Graze CTC خروجاً قوياً قدره 800 لومن/قدم. مزودة بميزات ذكية، تتضمن أضواء Graze CTC أوضاع طاقة متعددة، وإدارة الأجهزة عن بُعد (RDM)، وإخراج إجمالي سهل التعديل لعدد لومن منخفض، وقابلية التحكم عبر DMX، وتركيب سهل من خلال مصدر الطاقة العالمي المتكامل.

مع التركيز العالي على الاستدامة، يمكن توصيل هذه التركيبات على شكل سلسلة باستخدام موصل طاقة وبيانات مشترك، مما يتيح تشغيل تركيبات طويلة لتبسيط البنية التحتية. تجعل قابلية تغيير زاوية الشعاع بسهولة التغيرات التصميمية المتأخرة والتعديلات في الموقع سهلة، كما يسمح تصميم لوحة التركيب الذكية بمجموعة من حلول الحوامل القياسية أو المخصصة.

يتميز التصميم النحيف لهذه الأضواء بسهولة دمجها في العناصر المعمارية مع متطلبات هيكلية أقل. جميع النماذج متاحة إما في أطوال خطية 1 قدم أو 4 أقدام ويتم شحنها في عبوات معتمدة من FSC.

  • EASE OF INSTALLATION

    The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

  • SMART INFRASTRUCTURE

    Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

  • SUPERIOR COLOR TEMPERATURE CONTROL

    Cold, neutral, and warm LEDs are included for precise color temperature control from 2700K to 6500K at high efficacy with 12 LEDs/ft. They also feature a high color rendering index (CRI) covering the entire color temperature spectrum.

  • EFFICIENT OPERATION

    With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

featured content

EASE OF INSTALLATION

The slim and low weight design makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

featured content

SMART INFRASTRUCTURE

Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

featured content

SUPERIOR COLOR TEMPERATURE CONTROL

Cold, neutral, and warm LEDs are included for precise color temperature control from 2700K to 6500K at high efficacy with 12 LEDs/ft. They also feature a high color rendering index (CRI) covering the entire color temperature spectrum.

featured content

EFFICIENT OPERATION

With more than 60 lm/W, Exterior Linear Pro CTC fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

الفيديوهات

 

 

الميزات

  • Warm, neutral and cold white LEDs (2700K, 4000K, 6500K) (12 LEDs/ft)
  • Narrow 9° beam angle
  • Interchangeable micro lens film for alternative beam angles
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • 5W/ft power mode meets ASHRAE standards for linear facade lighting 
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width

المواصفات

  • Physical Width: 40 mm (1.57 inch.) Height: 68 mm (2.67 inch) Length - 1 ft Version: 312mm (1.02 ft) Length - 4 ft Version: 1227mm (4.02 ft) Weight - 1 ft Version: 0.85 kg (1.9 lbs) Weight - 4 ft Version: 2.8 kg (6.2 lbs)
    Dynamic Effects Intensity: 0 - 100% Color temperature control: 2700 K – 6500 K Segment Control: 0.5ft, 1 ft or full 4 ft fixture control
    Control and Programming Control systems: DMX, RDM User interface: Magnetic button to call up fixture status and test fixture Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX individual color control Dimmer Resolution: 16-bit DMX control of intensity DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX channels 4ft: 3/3/12/24 (standard/1 seg/4 seg/8 seg) DMX channels 1ft: 3/6/3 (standard/1 seg/2 seg)
    Optics Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse) Beam angle**: 9°, 9°x 30° , 9°x 60°
    *Figure obtained under manufacturer's test conditions
    ** Asymmetric beam angles available as accessory micro-lens films
    Photometric Data CRI (Color Rendering Index) : >70 (higher CRI available on request) CCT: 2700K - 6500K Luminous output:
      1 ft at 12W 4 ft at 48W
    2700K: 790 lumens 3390 lumens
    4000K: 900 lumens 3730 lumens
    6500K: 850 lumens 3600 lumens
    Construction Housing: Aluminum Finish: Clear anodized (standard) or white (optional) Front: Clear polycarbonate Protection rating: IP66 IK rating: IK08 Effective Projected Area (EPA): 0.04 m2 per ft Corrosion resistance: C5 - very high corrosivity / Durability Range: High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    Installation Orientation: Any Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.
  • Connections

    Power/data in/thru: 8-pin custom connectors
    Surge Protection: 4 KV
    Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
    Maximum total string length (cable + fixtures)*: 150 m / 328 ft
    * Refer to system diagram for details on fixture run limitations.

    Electrical

    AC power: 100-277 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A                   
    Typical earth-leakage current 1 ft: 0.15 mA
    Typical earth-leakage current 4 ft: 0.21 mA
    Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
    Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

    Power Consumption 1 ft
    Maximum: 12 W / 10 W / 5 W *
    Idle: 1.54 W *

    Power Consumption 4 ft
    Maximum: 48 W / 40 W / 20 W *
    Idle: 2.30 W *

    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Idle: steady state, all LEDs at zero intensity.
    Power Consumption: Depending on power setting mode.

    Thermal Cooling: Convection Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)
    *Above this temperature, the fixture regulates output to protect from overheating
    Maximum total heat dissipation, calculated, +/- 10%: 41 BTU/hr. per foot
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging Efficacy (max output): 75 lm/W LWR*: 1059 lm/kg (474 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Related Items Martin Companion Cable: P/N MAR-91616091 Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
    Accessories

    Beam control
    Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022
    Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023
    Louvre, EL Pro CTC, 1ft set of 4: P/N MAR-90570028
    Asymm diffuser Wide EL Pro 4ft, set of 6: P/N MAR-90570020
    Asymm diffuser Narrow EL Pro 4ft, set of 6: P/N MAR-90570021

    Mounting brackets
    Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025
    Flange bracket EL Pro 10 pcs: MAR-90570026
    Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027

    Pre-assembled PD Hybrid Power DMX cables
    Power DMX Cable PD PD 0.2M: P/N MAR-91700004
    Power DMX Cable PD PD 1M EU: MAR-91700005
    Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006
    Power DMX Cable PD PD 5M EU: P/N MAR-91700007
    Power DMX Cable PD PD 10M EU: P/N MAR-91700008
    Power DMX Cable PD PD 0.2M US: P/N MAR-91700010
    Power DMX Cable PD PD 1M US: P/N MAR-91700011
    Power DMX Cable PD PD 2.5M US: P/N MAR-91700012
    Power DMX Cable PD PD 5M US: P/N MAR-91700013
    Power DMX Cable PD PD 10M US: P/N MAR-91700014

    Bulk Hybrid Power DMX Cables and Connectors
    Power DMX Cable 100M Roll EU: P/N MAR-91700009
    Power DMX Cable 100M Roll US: P/N MAR-91700016
    Field installable connector PD female: P/N MAR-91700017
    Field installable connector PD male: P/N MAR-91700018

    Junction box and End Termination Cap, Multitool
    End termination cap PD: P/N MAR-91700015
    Junction Box Power DMX to PD: P/N MAR-91700019
    Exterior Multitool: P/N MAR-90590025

    Ordering Information Exterior Linear Pro graze CTC 1ft: P/N MAR-90570006 Exterior Linear Pro graze CTC 4ft: P/N MAR-90570008

التنزيلات

Specifications
  الإصدار اللغة الحجم تاريخ التحميل
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en الإصدار B, تم التحديث: يوليو 2025
en  958 KB يوليو 2025
file type icon Exterior Linear Pro System Diagram
en الإصدار D, تم التحديث: يناير 2026
en  1.12 MB يناير 2026
file type icon Exterior Linear Pro Graze CTC Spec Sheet
en الإصدار F, تم التحديث: يناير 2026
en  1.31 MB يناير 2026
file type icon Descriptive Specs - Exterior Linear Pro Graze CTC
en الإصدار A, تم التحديث: ديسمبر 2022
en  82.8 KB ديسمبر 2022
Manuals
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Exterior Linear Pro - User, Safety and Installation Manual
en الإصدار B, تم التحديث: يوليو 2023
en  2.25 MB يوليو 2023
file type icon Exterior Linear Pro - Bedienungsanleitung mit Installations- und Sicherheitshinweisen
de الإصدار B, تم التحديث: يوليو 2023
de  2.05 MB يوليو 2023
fr  2.14 MB يوليو 2023
Brochures
  اللغة الحجم تاريخ التحميل
file type icon HARMAN Install Hospitality Brochure
en تم التحديث: أكتوبر 2024
en  6.83 MB أكتوبر 2024
Photometrics
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Exterior Linear Pro Graze CTC Photometrics
en الإصدار B, تم التحديث: أبريل 2023
en  18.2 MB أبريل 2023
Illustrations
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Junction Box - 2D dimensions (PDF)
en الإصدار A, تم التحديث: أكتوبر 2022
en  238 KB أكتوبر 2022
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (PDF)
en الإصدار B, تم التحديث: يونيو 2024
en  1.29 MB يونيو 2024
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (DWG)
en الإصدار B, تم التحديث: يونيو 2024
en  6.76 MB يونيو 2024
file type icon Junction Box - 2D dimensions (DWG)
en الإصدار A, تم التحديث: أكتوبر 2022
en  1.2 MB أكتوبر 2022
Symbols
  الإصدار اللغة الحجم تاريخ التحميل
file type icon AutoCAD 2D Symbols
en الإصدار 2.8, تم التحديث: يناير 2026
2.8  en  4.42 MB يناير 2026
file type icon AutoCAD 3D Symbols
en الإصدار 2.8, تم التحديث: يناير 2026
2.8  en  18.7 MB يناير 2026
file type icon Martin Professional GDTF Library
en الإصدار A, تم التحديث: أكتوبر 2023
en  203 Bytes أكتوبر 2023
file type icon Vectorworks Symbols
en الإصدار 4.6, تم التحديث: يناير 2026
4.6  en  249 MB يناير 2026
CAD Drawings
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Exterior Linear Pro Graze-Cove - 3DS
en الإصدار B, تم التحديث: مارس 2025
en  5.89 MB مارس 2025
file type icon Junction Box - 3D DWG
en الإصدار B, تم التحديث: يناير 2024
en  5.09 MB يناير 2024
file type icon Junction Box - 3DS
en الإصدار B, تم التحديث: يناير 2024
en  8.47 MB يناير 2024
file type icon Exterior Linear Pro Graze-Cove - 3D DWG
en الإصدار B, تم التحديث: مارس 2025
en  13.7 MB مارس 2025
BIM Objects
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Exterior Linear Pro Graze CTC - BIM Object
en الإصدار A, تم التحديث: نوفمبر 2023
en  نوفمبر 2023
Compliances
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Exterior Linear Pro - CB Test Certificate
en الإصدار B, تم التحديث: يناير 2024
en  252 KB يناير 2024
file type icon Exterior Linear Pro - EU Declaration of Conformity
en الإصدار A, تم التحديث: مارس 2023
en  280 KB مارس 2023
file type icon Exterior Linear Pro - UKCA Declaration of Conformity
en الإصدار A, تم التحديث: مارس 2023
en  279 KB مارس 2023
file type icon Exterior Linear Pro - ETL Listing Verification
en الإصدار A, تم التحديث: مارس 2023
en  590 KB مارس 2023
file type icon Product Verification and Reliability Report - Exterior Linear Pro
en الإصدار B, تم التحديث: نوفمبر 2023
en  419 KB نوفمبر 2023
Service Notes
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Assembly instruction for PD hybrid connectors
en الإصدار A, تم التحديث: يناير 2025
en  5.21 MB يناير 2025
Firmware
  الإصدار الحجم تاريخ التحميل
download icon for Exterior Linear Pro Family - Firmware Exterior Linear Pro Family - Firmware
الإصدار 1.2.1, تم التحديث: يونيو 2026
1.2.1   يونيو 2026

إذا أدت أي من الروابط أعلاه إلى أحرف غريبة في متصفحك، يرجى النقر بزر الماوس الأيمن على الملف لحفظه على جهاز الكمبيوتر الخاص بك.

الأخبار

الدعم/الأسئلة الشائعة

Exterior Linear Pro Graze CTC

مصباح إضاءة خطي خارجي مع التحكم في درجة حرارة اللون


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - 4KV  Martin Warranty - IK08