Exterior Wash 200
Udgået

Udendørsgodkendt RGBW-farveblandingsvaskeskinne

Exterior Wash 200
Større billeder

Begrænset mængde disponibel - kontakt venligst din forhandler for information

Exterior™ Wash 200 er en kraftfuld, kompakt og energieffektiv LED-belysningsarmatur designet til at belyse medium-store strukturer og bygningsfacader. Et diskret, valgfrit snoot integreres problemfrit med armaturfixturernes elegante design. Den har indbygget display for nem betjening, et bredt udvalg af strålevinkler og er fuldt IP-klassificeret til permanent udendørs brug.

Exterior Wash 200 er designet til narrow beam-anvendelser og er baseret på separate LED'er for rød, grøn, blå og hvid

Læs mere om vores produktverificering og pålidelighed

  • Narrow beam-konfiguration med 6 strålevinkelmuligheder
  • Funktionelt og diskret valgfrit snoot, som integreres med armaturfixturernes design
  • Styring via DMX, RDM og OLED-display

Videoer

 

 

Funktioner

  • Kraftfulde enkeltfarve R,G,B,W LED'er
  • Op til 6500 lumen ved fuld hvid (RGBW)
  • Seks forskellige strålekulmuligheder
  • Intern strøm og kontrol (DMX, RDM og OLED-display)
  • Robust IP66-hus
  • 0–100% intensitetskontrol

Specifikationer

  • Physical Length: 270 mm (10.7 in.) Width: 334 mm (13.2 in.) Height: 382 mm (15.1 in.) Weight: 13.0 kg (28.7 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending on DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 16 x R, 18 x G, 16 x B, 18 x W single-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 25°
    Wide diffuser: 36°
    Very wide diffuser: 60°
    Asymmetric diffuser: 59° x 14.5°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 6500 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 3 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.3 A Maximum total power consumption: 185 W Surge protection: 4 KV Max earth leakage: 0.50 mA
    Typical Power and Current 100 V, 60 Hz: 1.6 A, 160 W, PF 0.99 120 V, 60 Hz: 1.35 A, 160 W, PF 0.99 230 V, 50 Hz: 0.75 A, 160 W, PF 0.94 277 V, 60 Hz: 0.65 A, 160 W, PF 0.89 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 41 lm/W LWR*: 500 lm/kg (224 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745 Exterior Wash 200 Honeycomb Louvre: P/N 91611857
    Ordering Information Exterior Wash 200, 7°, EU, aluminum: P/N 90509087 Exterior Wash 200, 7°, US, aluminum: P/N 90509090

Downloads

Specifications
  Version Sprog Størrelse Uploadet
file type icon Exterior Wash 200 Spec Sheet-English
en version B, opdateret: nov 2018
en  753 kB nov 2018
file type icon Exterior Wash System Diagrams
en version B, opdateret: okt 2020
en  295 kB okt 2020
Manuals
  Version Sprog Størrelse Uploadet
file type icon Exterior Wash 200 Series - User Manual
en version M, opdateret: jul 2023
en  1,28 MB jul 2023
file type icon Exterior Wash 200 Serie - Bedienungsanleitung
de version A, opdateret: jul 2020
de  876 kB jul 2020
file type icon Exterior Wash 200 Series - Manuel d'utilisation
fr version A, opdateret: okt 2020
fr  662 kB okt 2020
Photometrics
  Version Sprog Størrelse Uploadet
file type icon Exterior Wash 200 - Photometric Files
en version A, opdateret: mar 2024
en  643 kB mar 2024
Illustrations
  Version Sprog Størrelse Uploadet
en  7,43 MB okt 2020
en  1,89 MB okt 2020
en  7,9 MB okt 2020
en  1,76 MB okt 2020
Symbols
  Version Sprog Størrelse Uploadet
file type icon AutoCAD 2D Symbols
en version 2.8, opdateret: jan 2026
2.8  en  4,42 MB jan 2026
file type icon AutoCAD 3D Symbols
en version 2.8, opdateret: jan 2026
2.8  en  18,7 MB jan 2026
file type icon Vectorworks Symbols
en version 4.6, opdateret: jan 2026
4.6  en  249 MB jan 2026
CAD Drawings
  Version Sprog Størrelse Uploadet
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en version A, opdateret: maj 2018
en  56,5 MB maj 2018
Compliances
  Version Sprog Størrelse Uploadet
  407 kB maj 2018
en  95 kB okt 2020
file type icon Exterior Wash Series - ETL Listing Verification
en version B, opdateret: maj 2018
en  349 kB maj 2018
Service Notes
  Version Sprog Størrelse Uploadet
  743 kB okt 2020
en  1020 kB okt 2020
EW series Incorrect warning print
opdateret: maj 2018
      maj 2018
Tech Notes
  Størrelse Uploadet
file type icon EW-Series UV Warning Printing
opdateret: jan 2018
jan 2018
Firmware
  Version Størrelse Uploadet
download icon for Exterior Wash 200 - Firmware Exterior Wash 200 - Firmware
version 2.1.0, opdateret: jul 2026
2.1.0   jul 2026

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

HARMAN Pro Insights

Why the World’s Most Iconic Cruise Lines Trust Martin Lighting to Go Far Beyond feature

Why the World’s Most Iconic Cruise Lines Trust Martin Lighting to Go Far Beyond

What is the ideal commercial lighting package for an entertainment venue, typically in motion, facing the toughest weather conditions, including extreme sun, wind, rain, salt, mist and vibrations? When it comes to outfitting luxury cruise ships with the latest innovations in entertainment and architectural lighting,

CONTINUE READING

Support/FAQ

HARMAN Professional Solutions: