αρχική > προϊόντα > Product Ranges > ELP > ELP WW

ELP WW
Διακόπηκε

Warm white LED ellipsoidal profile

ELP WW

Μεγαλύτερες εικόνες

Τα ελλειψοειδή φωτιστικά LED Martin ELP WW (Warm White) παρέχουν την κορυφαία στην κατηγορία φωτεινότητα, ισχύ εξόδου και ζωηρή απόδοση χρωμάτων που έχετε συνηθίσει να περιμένετε από τη Martin. Η εργονομική δανική μηχανική προσφέρει εξελίξεις στη λειτουργικότητα του φωτισμού, μεταξύ των οποίων το εξαιρετικά αποδοτικό Fine Focus με μηχανισμό γραναζιών—πρώτο στον κλάδο—και το Fast Focus, το οποίο επιτρέπει την εστίαση του φωτιστικού χωρίς να απαιτείται ροή δεδομένων προς αυτό. Το ELP προσφέρει επίσης ρύθμιση φωτεινότητας 16 bit με 4 επιλέξιμες καμπύλες. Τα φωτιστικά ELP μπορούν να διαμορφωθούν με έναν από τους τέσσερις φακούς-σωλήνες (lens tubes) της Martin, σε γωνίες δέσμης 19, 26, 36 και 50 μοιρών, και είναι συμβατά με φακούς-σωλήνες τρίτων κατασκευαστών, καθώς και με ευρύ φάσμα αξεσουάρ, συμπεριλαμβανομένων πλαισίων gel και gobo, για ευελιξία στον σχεδιασμό φωτισμού και τη διαχείριση αποθέματος.

Η ανώτερη ισχύς εξόδου, τα οπτικά και η απόδοση χρωμάτων, σε συνδυασμό με την απαράμιλλη ευκολία χρήσης και πρακτικότητα, καθιστούν το Martin ELP WW το κορυφαίο ελλειψοειδές φωτιστικό Warm White LED στην κατηγορία του. Οι φακοί ELP Zoom Lenses διευρύνουν την ευελιξία της σειράς με δύο εύρη δέσμης βιομηχανικού προτύπου και δύο παραλλαγές χρώματος περιβλήματος, διαθέσιμες σε εύρη δέσμης 15-30 μοιρών και 25-50 μοιρών, σε μαύρο ή λευκό περίβλημα.

Η Martin συνιστά τη χρήση επίσημων αξεσουάρ ELP με το σήμα της Martin για τις υψηλότερες δυνατές επιδόσεις. Παρότι προσπαθούμε να διασφαλίσουμε τη συμβατότητα με αξεσουάρ τρίτων κατασκευαστών, δεν μπορούμε να εγγυηθούμε βέλτιστη απόδοση και συνιστούμε στον χρήστη να αξιολογεί ένα τέτοιο αξεσουάρ πριν από την αγορά.

Advanced Martin Optics

Martin ELP Ellipsoids feature optic assemblies designed in Denmark by the technology innovators behind MAC Encore, the leading LED moving light. The ELP is designed to maximize efficiency and deliver a flat field of illumination for smoother blending and mixing between fixtures.
Meet Cutting-Edge LED Technology

ELP WW delivers 7,000 lumens of output and an industry-leading 97 CRI at 3000K color temperature, for the truest color representation on any surface. ELP CL offers an impressive 6,900 lumens and 85 CRI in High Output mode, and 5,900 lumens and 90 CRI in High Quality mode, with a color temperature of 6,000K (open white). Both models offer flicker-free operation for consistent light output, on and off camera and 16-bit dimming with 4 selectable curves.
Focus on Functionality

ELP takes a classic light fixture to new performance levels with a suite of innovative features. Our gear-based Fine Focus adjustment—an industry first—lets you lock focus exactly where you want it, instantly. There’s no refocusing, no drifting and no slipping. Our innovative Fast Focus feature brings the fixture to full output for 60 seconds without data running to the fixture. Halation Color correction removes atypical blue and brown halos when using Martin lens tubes.
And Ergonomics Too

Danish engineering is all about efficiency and ergonomics, and the subtle details of ELP are no exception: We’ve placed the center of gravity as close to the yoke as possible, for more comfortable operation. And, we’ve placed tilt knobs out of the way of framing shutters, to allow quick, easy position adjustments.
Invest in the Future, with a Minimal Financial Investment

It has never been easier to transition your inventory to LED ellipsoidals. In addition to the four lens tube configurations available through Martin, the ELP line fits common 3rd party lens tubes and accessories—which which means you can save money by using your existing gel frames, gobo holders and rotators and lens tubes.

featured content

Advanced Martin Optics

Martin ELP Ellipsoids feature optic assemblies designed in Denmark by the technology innovators behind MAC Encore, the leading LED moving light. The ELP is designed to maximize efficiency and deliver a flat field of illumination for smoother blending and mixing between fixtures.

featured content

Meet Cutting-Edge LED Technology

ELP WW delivers 7,000 lumens of output and an industry-leading 97 CRI at 3000K color temperature, for the truest color representation on any surface. ELP CL offers an impressive 6,900 lumens and 85 CRI in High Output mode, and 5,900 lumens and 90 CRI in High Quality mode, with a color temperature of 6,000K (open white). Both models offer flicker-free operation for consistent light output, on and off camera and 16-bit dimming with 4 selectable curves.

featured content

Focus on Functionality

ELP takes a classic light fixture to new performance levels with a suite of innovative features. Our gear-based Fine Focus adjustment—an industry first—lets you lock focus exactly where you want it, instantly. There’s no refocusing, no drifting and no slipping. Our innovative Fast Focus feature brings the fixture to full output for 60 seconds without data running to the fixture. Halation Color correction removes atypical blue and brown halos when using Martin lens tubes.

featured content

And Ergonomics Too

Danish engineering is all about efficiency and ergonomics, and the subtle details of ELP are no exception: We’ve placed the center of gravity as close to the yoke as possible, for more comfortable operation. And, we’ve placed tilt knobs out of the way of framing shutters, to allow quick, easy position adjustments.

featured content

Invest in the Future, with a Minimal Financial Investment

It has never been easier to transition your inventory to LED ellipsoidals. In addition to the four lens tube configurations available through Martin, the ELP line fits common 3rd party lens tubes and accessories—which which means you can save money by using your existing gel frames, gobo holders and rotators and lens tubes.

Βίντεο

Χαρακτηριστικά

Impressive light output rating of 7,000 lumens at 3000K.
Industry-leading CRI rating of 97.
Revolutionary focus and functionality—industry’s first gear-driven Fine Focus, Fast Focus for data-free focusing, and more.
Compatible with universal accessories—use existing lens tubes, gel frames, gobo holders and rotators
15-30 degree and 25-50 degree beam Zoom lenses available in black and white
Advanced optics engineered in Denmark
Warm White light engine employs leading-edge LED chipset technology for high output and smooth LED blending
16-bit dimming with 4 selectable dimming curves
Flicker-free operation
5-pin DMX/RDM and Neutrik True1 In/Thru connectivity

Προδιαγραφές

Physical Length: 648 mm (25.5 in.) Width: 259 mm (10.2 in.) Height: 254 mm (10 in.), 427 mm (16.8 in.) with bracket Weight: 7.7 kg (17 lbs) body only

Dynamic Effects Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout

Control and Programming Control options: DMX, stand-alone Setting and addressing: Control panel with OLED display or via RDM 16-bit control: Intensity DMX channels: 1/2/4 PWM: 600-2400 Hz Standalone programming: Control panel with OLED display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485

Optics Light source: 91 X 3W warm white LEDs Minimum LED lifetime: 30,000 hours (to >70% luminous output)* Color temperature: 3000K Lens tube options: 19°, 26°, 36°, 50° Zoom Lens Tube Options: 15–30° and 25–50° Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions

Photometric Data Light engine luminous output: 16,000 lumen Fixture luminous output: 7000 lumen CRI (Color Rendering Index) : >97 CQS (Color Quality Scale): >93 TM-30 Rf (IES TM-30-15 Fidelity Index): >93 TM-30 Rg (IES TM-30-15 Gamut Index): >101 TLCI (Television Lighting Consistency Index): >96
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction Housing: Die-cast aluminum Color: Black or white variant Protection rating: IP20

Gobos and Color Frame Gobo size : A size, 100 mm OD, 75 mm image*, B size, 86 mm OD, 64.5 mm image* Color frame size: 159 X 159 mm (6.25 X 6.25 in.) *Gobo holder not included

Installation Mounting: Adjustable bracket Location: Indoor use only Orientation: Any Minimum distance to combustible materials: 0.2 m (0.7 ft.) Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)
Connections AC power in, thru: Neutrik PowerCON TRUE1 DMX and RDM data in/out: 5-pin locking XLR

Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 15.3 A
Power Factor: 0.99 @ 110 V , 0.97 @ 208 V , 0.96 @ 230 V / 240 V
Typical current draw: 2.6 A @ 110 V , 1.4 A @ 208 V , 1.2 A @ 230 V / 240 V *
Power Consumption
Typical: 280 W *
Idle: 5 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F) Total heat dissipation (calculated, +/- 10%): 1000 BTU/hr. (at full intensity, full white)

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 28 lm/W LWR*: 909 lm/kg (412 lm/lb)
LWR = Lumen-to-Weight Ratio

Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55103-2; EN 61000-3-2,-3; EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM

Included Items
Power input cable (0.75mm2, 18 AWG), bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.)
Mounting bracket
User manual

Related Items Martin Companion Cable: P/N 91616091 Martin ELP Lens Tube 19°: P/N 9045107782 Martin ELP Lens Tube 19° White : P/N 9045115166 Martin ELP Lens Tube 26°: P/N 9045107783 Martin ELP Lens Tube 26° White : P/N 9045115167 Martin ELP Lens Tube 36°: P/N 9045107784 Martin ELP Lens Tube 36° White : P/N 9045115168 Martin ELP Lens Tube 50°: P/N 9045107785 Martin ELP Lens Tube 50° White : P/N 9045115170 Martin ELP Zoom Lens Tube 15–30°: P/N 9045121618 Martin ELP Zoom Lens Tube 15–30°, White: P/N 9045122108 Martin ELP Zoom Lens Tube 25–50°: P/N 9045121619 Martin ELP Zoom Lens Tube 25–50°, White: P/N 9045122109

Accessories Cables, 16 A, for connection to power in chains:
Power input cables
Power input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm², 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power input cable, SJOOW, 12 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Power relay cables
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1-TRUE1 0.45 m (1.5 ft.): P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1-TRUE1 1.2 m (3.9 ft.): P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm², TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611786
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Connectors:
Power connector, cable mount, Neutrik TRUE1 NAC3FX-W (female): P/N 91611789
Power connector, cable mount, Neutrik TRUE1 NAC3MX-W (male): P/N 91611788
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information Martin ELP WW (Body Only): P/N 9045107781 Martin ELP WW (Body Only), White: P/N 9045115165

Λήψεις

Specifications

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
Martin ELP System Diagrams έκδοση A, ενημέρωση: Οκτ 2020	A		200 KB	Οκτ 2020
ELP WW Spec Sheet έκδοση B, ενημέρωση: Δεκ 2020	B		1 MB	Δεκ 2020
Martin ELP WW Acoustic Test Report έκδοση A, ενημέρωση: Οκτ 2020	A		1 MB	Οκτ 2020

Manuals

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
ELP WW User Manual έκδοση F, ενημέρωση: Σεπ 2023	F		2 MB	Σεπ 2023
ELP WW User Manual έκδοση A, ενημέρωση: Οκτ 2020	A		2 MB	Οκτ 2020
ELP WW User Manual έκδοση A, ενημέρωση: Οκτ 2020	A		2 MB	Οκτ 2020
ELP WW User Manual έκδοση A, ενημέρωση: Οκτ 2020	A		2 MB	Οκτ 2020

Photometrics

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
ELP WW Photometric Files έκδοση B, ενημέρωση: Οκτ 2020	B		2 MB	Οκτ 2020

Illustrations

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
ELP Series 2D Dimensions (PDF) έκδοση A, ενημέρωση: Μαρ 2019	A		1 MB	Μαρ 2019
ELP Series 2D Dimensions (DWG) έκδοση A, ενημέρωση: Μαρ 2019	A		6 MB	Μαρ 2019

Symbols

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
Vectorworks Symbols έκδοση 4.7, ενημέρωση: Αυγ 2026	4.7		300 MB	Αυγ 2026
AutoCAD 2D Symbols έκδοση 2.9, ενημέρωση: Αυγ 2026	2.9		5 MB	Αυγ 2026
AutoCAD 3D Symbols έκδοση 2.9, ενημέρωση: Αυγ 2026	2.9		20 MB	Αυγ 2026

CAD Drawings

	Έκδοση	Μέγεθος	Ανέβηκε
ELP Series 3D Dimensions (3DS) έκδοση B, ενημέρωση: Οκτ 2020	B	20 MB	Οκτ 2020
ELP Series 3D Dimensions (DWG) έκδοση B, ενημέρωση: Οκτ 2020	B	10 MB	Οκτ 2020

BIM Objects

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
ELP WW - BIM Object έκδοση A, ενημέρωση: Σεπ 2021	A			Σεπ 2021

Compliances

	Έκδοση	Γλώσσα	Μέγεθος	Ανέβηκε
Martin ELP CL/WW - FCC Declaration of Conformity έκδοση A, ενημέρωση: Νοε 2024	A		300 KB	Νοε 2024
ETL Listing Verification ενημέρωση: Μαρ 2019			100 KB	Μαρ 2019
Martin ELP CL/WW - Declaration of Conformity έκδοση A, ενημέρωση: Νοε 2024	A		600 KB	Νοε 2024

Service Notes

	Έκδοση	Μέγεθος	Ανέβηκε
3D Partsfinder - Opening using Solid Works Composer Player έκδοση 4, ενημέρωση: Οκτ 2020	4	700 KB	Οκτ 2020

Firmware

	Έκδοση	Μέγεθος	Ανέβηκε
ELP WW - Firmware έκδοση 1.2.04, ενημέρωση: Σεπ 2026	1.2.04		Σεπ 2026

Εάν κάποιος από τους παραπάνω συνδέσμους έχει ως αποτέλεσμα παράξενους χαρακτήρες στο πρόγραμμα περιήγησής σας, κάντε δεξί κλικ στο αρχείο για να το αποθηκεύσετε στον υπολογιστή σας.

Ειδήσεις

19 Οκτώβριος 2018
HARMAN Professional Solutions Announces Martin ELP LED Ellipsoid Fixtures

Υποστήριξη/FAQ

HARMAN Professional Solutions:

Υποστήριξη Συμβούλων