Exterior Linear Pro DV QUAD

Outdoor Linear Direct View Fixture with Color Boosting Technology and Fine Segment Control

Martin Exterior Linear Pro DV (Direct View) QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output, color boost technology and discreet yet robust housings. They are specifically designed for direct view applications and are equipped with a round diffuser and segment control for low resolution content and their high lumen output makes them highly visible in daylight situations. They are perfect for soft, direct view lighting solutions enhancing ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other applications needing similar lighting enhancements.

DV QUAD models feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.

Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.

With a high focus on sustainability, DV QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging. 

  • FACILITÉ D'INSTALLATION

    Le design fin et le poids réduit facilitent leur intégration discrète dans les éléments architecturaux avec des exigences structurelles minimales. Ils offrent des angles de faisceau ajustables pour les modifications tardives de conception et les ajustements sur site. Une platine de montage astucieuse permet de choisir parmi de nombreuses solutions de fixation, standard ou sur mesure.

  • SOPHISTICATED COLOR CONTROL

    These QUAD color fixtures include logic RGB control of the RGBW engine, making it easier to mix colors when the white color is automatically calculated. Factory calibration of colors offers superior consistency and user-selectable default color temperature with the ability to set a favorite default color temperature. Fine segment control is also included for more organic and subtle color transitions.

  • INFRASTRUCTURE INTELLIGENTE

    Les projecteurs sont contrôlables en DMX et faciles à installer grâce à leur alimentation universelle intégrée. Ils peuvent également être raccordés en guirlande via un connecteur combiné d'alimentation et de données, ce qui permet de réaliser des chaînes de projecteurs plus longues pour des infrastructures simplifiées.

  • PREMIXED COLORS WITH COLOR BOOST

    QUAD color LEDs deliver an enhanced visual appearance with homogenous color mixing and high lumen output of mixed colors. A color boosting feature is also included for full powered illumination of a single color or mixed colors, making them up to three times brighter than comparable fixtures yet boasting lower total power consumption.

  • FONCTIONNEMENT À HAUT RENDEMENT

    Avec plus de 50 lm/W, les luminaires Exterior Linear Pro QUAD sont d'une grande efficacité. Plusieurs modes de puissance (12 W/10 W/5 W, dont un mode conforme à ASHRAE) peuvent être définis via le Remote Device Management (RDM) afin de réduire la consommation électrique selon les besoins.

  • CONTRÔLE D'ÉCLAIRAGE PRÉCIS

    Un mode segment intégré de 6 pouces (15 cm) permet un contrôle d'éclairage plus fin, pour des rendus organiques et subtils.

featured content

FACILITÉ D'INSTALLATION

Le design fin et le poids réduit facilitent leur intégration discrète dans les éléments architecturaux avec des exigences structurelles minimales. Ils offrent des angles de faisceau ajustables pour les modifications tardives de conception et les ajustements sur site. Une platine de montage astucieuse permet de choisir parmi de nombreuses solutions de fixation, standard ou sur mesure.

featured content

SOPHISTICATED COLOR CONTROL

These QUAD color fixtures include logic RGB control of the RGBW engine, making it easier to mix colors when the white color is automatically calculated. Factory calibration of colors offers superior consistency and user-selectable default color temperature with the ability to set a favorite default color temperature. Fine segment control is also included for more organic and subtle color transitions.

featured content

INFRASTRUCTURE INTELLIGENTE

Les projecteurs sont contrôlables en DMX et faciles à installer grâce à leur alimentation universelle intégrée. Ils peuvent également être raccordés en guirlande via un connecteur combiné d'alimentation et de données, ce qui permet de réaliser des chaînes de projecteurs plus longues pour des infrastructures simplifiées.

featured content

PREMIXED COLORS WITH COLOR BOOST

QUAD color LEDs deliver an enhanced visual appearance with homogenous color mixing and high lumen output of mixed colors. A color boosting feature is also included for full powered illumination of a single color or mixed colors, making them up to three times brighter than comparable fixtures yet boasting lower total power consumption.

featured content

FONCTIONNEMENT À HAUT RENDEMENT

Avec plus de 50 lm/W, les luminaires Exterior Linear Pro QUAD sont d'une grande efficacité. Plusieurs modes de puissance (12 W/10 W/5 W, dont un mode conforme à ASHRAE) peuvent être définis via le Remote Device Management (RDM) afin de réduire la consommation électrique selon les besoins.

featured content

CONTRÔLE D'ÉCLAIRAGE PRÉCIS

Un mode segment intégré de 6 pouces (15 cm) permet un contrôle d'éclairage plus fin, pour des rendus organiques et subtils.

Vidéos

 

 

Caractéristiques

  • Color-calibrated QUAD color LEDs (8 LEDs/ft)
  • Homogenous color mixing
  • Round diffuser for soft appearance and extended viewing angle
  • Dedicated color temperature control channel (1800K - 12000K)
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width

Caractéristiques techniques

  • Physical Width: 40 mm (1.57 inch.) Height: 84 mm (3.31 inch.) Length - 1 ft Version: 312mm (1.02 ft) Length - 4 ft Version: 1227mm (4.02 ft) Weight - 1 ft Version: 0.85 kg (1.9 lbs) Weight - 4 ft Version: 2.8 kg (6.2 lbs)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW Color temperature control: 1800K – 12000K in 50K steps (default 4000K) Segment Control: 0.5ft, 1 ft or full 4 ft fixture control
    Control and Programming Control systems: DMX, RDM User interface: Magnetic button to call up fixture status and test fixture Stand-alone control: Up to 20 scenes with individual fade/hold times Control resolution: 8-bit DMX individual color control Dimmer Resolution: 16-bit DMX control of intensity DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg) DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)
    Optics Light source: 8 x RGBW LEDs per foot Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle: 180° Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
    *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : >70 CCT: 1800K – 12000K (default 4000K) Luminous output:
      1 ft at 12W 4 ft at 48W
    2700K: 350 lumens 1400 lumens
    4000K: 400 lumens 1600 lumens
    6000K: 440 lumens 1760 lumens
    RED: 150 lumens 600 lumens
    GREEN: 330 lumens 1320 lumens
    BLUE: 60 lumens 240 lumens

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Aluminum Finish: Clear anodized (standard) or optional colors on request Front: Clear polycarbonate Protection rating: IP66 IK rating: IK08 Effective Projected Area (EPA): 0.04 m2 per ft Corrosion resistance: C5 - very high corrosivity / Durability Range: High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    Installation Orientation: Any Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.
  • Connections

    Power/data in/thru: 8-pin custom connectors
    Surge Protection: 4 KV
    Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
    Maximum total string length (cable + fixtures)*: 150 m / 328 ft
    * Refer to system diagram for details on fixture run limitations.

    Electrical

    AC power: 100-277 V AC nominal, 50/60 Hz
    Power supply unit: Auto-ranging electronic switch mode
    Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A                   
    Typical earth-leakage current 1 ft: 0.15 mA
    Typical earth-leakage current 4 ft: 0.21 mA
    Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.90 @ 277 V
    Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V

    Power Consumption 1 ft
    Maximum: 12 W / 10 W / 5 W *
    Idle: 1.54 W *

    Power Consumption 4 ft
    Maximum: 48 W / 40 W / 20 W *
    Idle: 2.30 W *

    * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Idle: steady state, all LEDs at zero intensity.
    Power Consumption: Depending on power setting mode.

    Thermal Cooling: Convection Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)
    *Above this temperature, the fixture regulates output to protect from overheating
    Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging Efficacy (max output): 37 lm/W LWR*: 529 lm/kg (237 lm/lb)

    *LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Canadian EMC: ICES 003(B), ICES 005(B) Australia/NZ: RCM India: BIS IS 10322(Part5/section5) Korea: KS C 9832, KS C 9835
    Related Items Martin Companion Cable: P/N MAR-91616091 Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
    Accessories

    Beam control
    Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022
    Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023

    Mounting brackets
    Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025
    Flange bracket EL Pro 10 pcs: MAR-90570026
    Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027

    Pre-assembled PD Hybrid Power DMX cables
    Power DMX Cable PD PD 0.2M: P/N MAR-91700004
    Power DMX Cable PD PD 1M EU: MAR-91700005
    Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006
    Power DMX Cable PD PD 5M EU: P/N MAR-91700007
    Power DMX Cable PD PD 10M EU: P/N MAR-91700008
    Power DMX Cable PD PD 0.2M US: P/N MAR-91700010
    Power DMX Cable PD PD 1M US: P/N MAR-91700011
    Power DMX Cable PD PD 2.5M US: P/N MAR-91700012
    Power DMX Cable PD PD 5M US: P/N MAR-91700013
    Power DMX Cable PD PD 10M US: P/N MAR-91700014

    Bulk Hybrid Power DMX Cables and Connectors
    Power DMX Cable 100M Roll EU: P/N MAR-91700009
    Power DMX Cable 100M Roll US: P/N MAR-91700016
    Field installable connector PD female: P/N MAR-91700017
    Field installable connector PD male: P/N MAR-91700018

    Junction box and End Termination Cap, Multitool
    End termination cap PD: P/N MAR-91700015
    Junction Box Power DMX to PD: P/N MAR-91700019
    Exterior Multitool: P/N MAR-90590025

    Ordering Information Exterior Linear Pro DV QUAD 1ft: P/N MAR-90570002 Exterior Linear Pro DV QUAD 4ft: P/N MAR-90570005

Téléchargements

Specifications
  Version Langue Taille Téléchargé
file type icon Descriptive Specs - Exterior Linear Pro DV QUAD
en version B, mis à jour : août 2024
B  en  89,1 ko août 2024
file type icon PD (Power+ Data) Hybrid Cables and Connectors
en version B, mis à jour : juil. 2025
B  en  958 ko juil. 2025
file type icon Exterior Linear Pro System Diagram
en version D, mis à jour : jan. 2026
D  en  1,12 Mo jan. 2026
file type icon Exterior Linear Pro DV QUAD Spec Sheet
en version F, mis à jour : sept. 2026
F  en  1,11 Mo sept. 2026
Manuals
  Version Langue Taille Téléchargé
C  en  2,27 Mo sept. 2026
C  fr  2,4 Mo sept. 2026
C  de  2,4 Mo sept. 2026
Brochures
  Langue Taille Téléchargé
file type icon HARMAN Install Hospitality Brochure
en mis à jour : oct. 2024
en  6,83 Mo oct. 2024
Photometrics
  Version Langue Taille Téléchargé
file type icon Exterior Linear Pro DV QUAD Photometrics
en version A, mis à jour : avr. 2023
A  en  3,87 Mo avr. 2023
Illustrations
  Version Langue Taille Téléchargé
file type icon Junction Box - 2D dimensions (PDF)
en version A, mis à jour : oct. 2022
A  en  238 ko oct. 2022
file type icon Exterior Linear Pro DV - 2D Dimensions (DWG)
en version B, mis à jour : juin 2024
B  en  2,59 Mo juin 2024
file type icon Exterior Linear Pro DV - 2D Dimensions (PDF)
en version B, mis à jour : juin 2024
B  en  733 ko juin 2024
file type icon Junction Box - 2D dimensions (DWG)
en version A, mis à jour : oct. 2022
A  en  1,2 Mo oct. 2022
Symbols
  Version Langue Taille Téléchargé
file type icon AutoCAD 2D Symbols
en version 2.9, mis à jour : août 2026
2.9  en  5,2 Mo août 2026
file type icon AutoCAD 3D Symbols
en version 2.9, mis à jour : août 2026
2.9  en  24,6 Mo août 2026
file type icon Vectorworks Symbols
en version 4.7, mis à jour : août 2026
4.7  en  286 Mo août 2026
file type icon Martin Professional GDTF Library
en version A, mis à jour : oct. 2023
A  en  203 octets oct. 2023
CAD Drawings
  Version Langue Taille Téléchargé
file type icon Exterior Linear Pro DV - 3DS
en version B, mis à jour : jan. 2024
B  en  2,91 Mo jan. 2024
file type icon Junction Box - 3D DWG
en version B, mis à jour : jan. 2024
B  en  5,09 Mo jan. 2024
file type icon Junction Box - 3DS
en version B, mis à jour : jan. 2024
B  en  8,47 Mo jan. 2024
file type icon Exterior Linear Pro DV - 3D DWG
en version B, mis à jour : jan. 2024
B  en  6,38 Mo jan. 2024
BIM Objects
  Version Langue Taille Téléchargé
file type icon Exterior Linear Pro DV QUAD - BIM Object
en version A, mis à jour : nov. 2023
A  en  nov. 2023
Compliances
  Version Langue Taille Téléchargé
file type icon Exterior Linear Pro - EU Declaration of Conformity
en version A, mis à jour : mars 2023
A  en  280 ko mars 2023
file type icon Exterior Linear Pro - UKCA Declaration of Conformity
en version A, mis à jour : mars 2023
A  en  279 ko mars 2023
file type icon Exterior Linear Pro - ETL Listing Verification
en version A, mis à jour : mars 2023
A  en  590 ko mars 2023
B  en  419 ko nov. 2023
file type icon Exterior Linear Pro - CB Test Certificate
en version B, mis à jour : jan. 2024
B  en  252 ko jan. 2024
Service Notes
  Version Langue Taille Téléchargé
file type icon Assembly instruction for PD hybrid connectors
en version A, mis à jour : jan. 2025
A  en  5,21 Mo jan. 2025
Firmware
  Version Taille Téléchargé
download icon for Exterior Linear Pro Family - Firmware Exterior Linear Pro Family - Firmware
version 2.0.0, mis à jour : nov. 2026
2.0.0   nov. 2026

Si l'un des liens ci-dessus affiche des caractères étranges dans votre navigateur, faites un clic droit sur le fichier pour l'enregistrer sur votre ordinateur.

News

Assistance/FAQ