Martin ELP CL IP

Större bilder

Martin ELP LED ellipsoidal fixtures deliver the luminance, brightness and vivid color rendering that have been synonymous with the Martin name for more than 30 years. Martin ELP CL IP offers the same rich saturated colors and class leading output as the original Martin ELP CL but expands its versatility into temporary outdoor applications through IP65 compliance for moisture resistance and complete dust protection, along with C3 corrosion resistance. ELP’s ergonomic Danish engineering offers advances in lighting functionality that include the highly efficient gear-based Fine Focus—an industry first; and Fast Focus which allows focusing of the fixture without data flowing to it. ELP also offers 16-bit dimming with 4 selectable curves and 26 color presets that match industry-standard color filters. ELP CL IP is available in black and white housing options and can be configured with one of four Martin static lens tubes in 19, 26, 36 and 50-degree beam angles, or a choice of two Martin Zoom lenses with choice of 15–30-degree and 25–50-degree range. ELP also offers flexibility in lighting design and inventory management through compatibility with third-party lens tubes along with a wide range of accessories including gel frames and gobos. Superior output, optics and color rendering, combined with robust protection from the elements, unparalleled ease-of-use and convenience, make Martin ELP the leading LED ellipsoidal fixture in its class.

Martin recommends using official Martin-branded ELP accessories for the highest possible performance. While we strive to ensure compatibility with third-party accessories, we cannot guarantee optimal performance and recommend that the user makes an evaluation of such an accessory before purchasing.

Advanced Martin Optics Meet Cutting-Edge LED Technology
The ELP is designed to maximize efficiency and deliver a flat field of illumination for smoother blending and mixing between fixtures. Halation color correction removes atypical blue and brown halos when using Martin lens tubes.

The ELP CL IP fixture offers an impressive 6,900 lumens and a CRI of 85 in High Output mode, and 5,900 lumens and 90 CRI in High Quality mode, with a color temperature of 6,000K (open white), and provides flicker-free operation for consistent light output on and off camera.
Klassisk stil med fokus på funktionalitet
ELP CL IP tar en klassisk ljusarmatur till nya prestandanivåer med en uppsättning innovativa funktioner. Vår kugghjulsbaserade Fine Focus-justering – en branschpremiär – låter dig omedelbart låsa fokus exakt där du vill ha det. Ingen omfokusering, ingen drift och ingen glidning. Vår innovativa Fast Focus-funktion för armaturen till full uteffekt utan att data behöver skickas till armaturen.

Robusta höljen är IP65-klassificerade för vattentäthet och fullständigt skydd mot damm och andra partiklar.
Utöka flexibiliteten med ELP zoomlinser
Förutom ett val av fyra Martin statiska linsrör med strålvinklar på 19, 26, 36 och 50 grader kan du utöka ELP:s flexibilitet och räckvidd med zoomlinser i intervallen 15–30 grader och 25–50 grader. Den optiska utformningen med 6 linser ger oöverträffad optisk prestanda och levererar den ultrastarka uteffekten, den oöverträffade jämna projektionen och det skarpa fokus som en statisk lins erbjuder, tillsammans med hastigheten och flexibiliteten hos en zoomlins.
Invest in the Future, With a Minimal Financial Investment
It’s never been easier to transition your inventory to LED ellipsoids: The ELP line fits common lens tubes and accessories, which means you can save money by using your existing gel frames, gobo holders and rotators and lens tubes.

Advanced Martin Optics Meet Cutting-Edge LED Technology
The ELP is designed to maximize efficiency and deliver a flat field of illumination for smoother blending and mixing between fixtures. Halation color correction removes atypical blue and brown halos when using Martin lens tubes.

The ELP CL IP fixture offers an impressive 6,900 lumens and a CRI of 85 in High Output mode, and 5,900 lumens and 90 CRI in High Quality mode, with a color temperature of 6,000K (open white), and provides flicker-free operation for consistent light output on and off camera.

Klassisk stil med fokus på funktionalitet
ELP CL IP tar en klassisk ljusarmatur till nya prestandanivåer med en uppsättning innovativa funktioner. Vår kugghjulsbaserade Fine Focus-justering – en branschpremiär – låter dig omedelbart låsa fokus exakt där du vill ha det. Ingen omfokusering, ingen drift och ingen glidning. Vår innovativa Fast Focus-funktion för armaturen till full uteffekt utan att data behöver skickas till armaturen.

Robusta höljen är IP65-klassificerade för vattentäthet och fullständigt skydd mot damm och andra partiklar.

Utöka flexibiliteten med ELP zoomlinser
Förutom ett val av fyra Martin statiska linsrör med strålvinklar på 19, 26, 36 och 50 grader kan du utöka ELP:s flexibilitet och räckvidd med zoomlinser i intervallen 15–30 grader och 25–50 grader. Den optiska utformningen med 6 linser ger oöverträffad optisk prestanda och levererar den ultrastarka uteffekten, den oöverträffade jämna projektionen och det skarpa fokus som en statisk lins erbjuder, tillsammans med hastigheten och flexibiliteten hos en zoomlins.

Invest in the Future, With a Minimal Financial Investment
It’s never been easier to transition your inventory to LED ellipsoids: The ELP line fits common lens tubes and accessories, which means you can save money by using your existing gel frames, gobo holders and rotators and lens tubes.

Funktioner

Legendary Martin quality in LED ellipsoidal light fixtures
Advanced optics engineered in Denmark
RGBAL Luxeon Rebel LED engine delivers vibrant, saturated colors
Class-leading output of 6,900 lumens (in High Output mode)
Superior CRI rating of 90 (in high quality mode)
Fast focus feature for data free focusing
Revolutionary Fine Focus gear-driven focus-adjustment knob locks in placement the first time.
IP65 rated for water resistance and complete protection against dust and other particulates
26 color presets match industry-standard filters
16-bit dimming with 4 selectable dimming curves
Compatible with universal accessories such as gel frames and gobo holders and rotators
Options include 4 static lens tubes and 2 zoom lenses with compatibility for 3rd party accessories
Halation color correction removes atypical blue and brown halos when using Martin lens tubes.
Flicker-free operation
4-blade manual framing shutters
Center of gravity at yoke for ergonomic use
Regulated cooling for ultra-quiet operation
5-pin DMX/RDM and Neutrik True1 In/Thru connectivity

Specifikationer

Physical Length: 644 mm (25.4 in.) Width: 255 mm (10.1 in.) Height: 255 mm (10.1 in.), 527 mm (20.1 in.) with bracket Weight: 12.2 kg (26.9 lb.) body only

Dynamic Effects Color mixing: RGBLA Color Temperature Range: 2000–10000K Color selection: 26 color presets Electronic dimming: 0–100%, Four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout

Control and Programming Control options: DMX, stand-alone Setting and addressing: Control panel with OLED display or via RDM 16-bit control: Intensity, CTC, RGBLA DMX channels: 1/10/17 PWM: 600–2400 Hz DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Stand-alone programming: Control panel with OLED display

Optics Light source: 91 x RGBAL Luxeon Rebel LEDs (19 Red, 24 Green, 12 Blue, 24 Lime, 12 Amber) Minimum LED lifetime: 30 000 hours (to >70% luminous output)* Color temperature: 2000–10000K Fixed Lens Tube Options: 19°, 26°, 36° and 50° Zoom Lens Tube Options: 15–30° and 25–50° Binning: Tight color and flux binning Calibration: White Point Color Calibration *Figure obtained under manufacturer's test conditions

Photometric Data
Light engine luminous output: 20,000 lumens High Output Mode Fixture luminous output: 6,900 lumens CRI (Color Rendering Index): >85 CQS (Color Quality Scale): >90 TM-30 Rf (IES TM-30-15 Fidelity Index): >84 TM-30 Rg (IES TM-30-15 Gamut Index): >111 TLCI (Television Lighting Consistency Index): >85 CCT: 5500 K (+/- 250 K) High Quality Mode Fixture luminous output: 5,900 lumens CRI (Color Rendering Index): >90 CQS (Color Quality Scale): >87 TM-30 Rf (IES TM-30-15 Fidelity Index): >84 TM-30 Rg (IES TM-30-15 Gamut Index): >106 TLCI (Television Lighting Consistency Index): >87 CCT: 6000 K (+/- 250 K)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction Housing: Die-cast aluminum Color: Black or white variant Protection rating: IP65

Gobos and Color Frame Gobo size :
A size, 100 mm OD, 75 mm image*
Gobo size: B size, 86 mm OD, 64.5 mm image*
Color frame size: 159 x 159 mm (6.25 in. x 6.25 in.)
*Gobo holder not included.

Installation Mounting: Adjustable bracket Location: Indoor, outdoor use, suitable for wet locations Orientation: Any Minimum distance to combustible materials: 0.2 m (0.7 ft.) Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)
Connections AC power in, thru: IP65-rated Neutrik PowerCON TRUE1 TOP DMX & RDM data in/thru: IP65-rated 5-pin XLR

Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 18.0 A
Power Factor: 0.99 @ 110 V , 0.96 @ 208 V , 0.95 @ 230 V / 240 V
Typical current draw: 2.4 A @ 110 V , 1.3 A @ 208 V , 1.3 A @ 230 V , 1.1 A @ 240 V *
Power Consumption
Typical: 259 W *
Idle: 5 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.

Thermal Cooling: Forced air (temperature-regulated, low noise) Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1000 BTU/hr. Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 28 lm/W LWR*: 627 lm/kg (284 lm/lb)
LWR = Lumen-to-Weight Ratio

Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-3 (B)/NMB-3 (B); ICES-5 (B)/ NMB-5 (B) Australia/NZ: RCM

Included Items
Mounting bracket
User manual

Related Items Martin Companion Cable: P/N 91616091 Martin ELP Lens Tube 19°: P/N 9045107782 Martin ELP Lens Tube 19° White : P/N 9045115166 Martin ELP Lens Tube 26°: P/N 9045107783 Martin ELP Lens Tube 26° White : P/N 9045115167 Martin ELP Lens Tube 36°: P/N 9045107784 Martin ELP Lens Tube 36° White : P/N 9045115168 Martin ELP Lens Tube 50°: P/N 9045107785 Martin ELP Lens Tube 50° White : P/N 9045115170 Martin ELP Zoom Lens Tube 15–30°: P/N 9045121618 Martin ELP Zoom Lens Tube 15–30°, White: P/N 9045122108 Martin ELP Zoom Lens Tube 25–50°: P/N 9045121619 Martin ELP Zoom Lens Tube 25–50°, White: P/N 9045122109

Accessories
Power Input Cables (16 A)*
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Power Relay Cables*
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611796

Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Power Connectors*
Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788HU
Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789HU
*All TRUE1 connectors are IP65-rated TOP type
Spare Parts
Pressure Relief Valve with Gore membrane, M12 x 1.5: P/N 5127883-00
Installation hardware
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information Martin ELP CL IP (Body Only): P/N 9045122814 Martin ELP CL IP (Body Only), White: P/N 9045122816

Nedladdningar

Specifications

	Version	Språk	Storlek	Uppladdat
ELP CL IP Spec Sheet version D, uppdaterad: nov 2025	D		1,36 MB	nov 2025
Martin ELP CL IP Acoustic Test Report version A, uppdaterad: okt 2020	A		1,07 MB	okt 2020

Manuals

	Version	Språk	Storlek	Uppladdat
ELP CL IP User Manual version C, uppdaterad: jan 2026	C		1,5 MB	jan 2026
ELP CL IP User Manual version C, uppdaterad: jan 2026	C		2,37 MB	jan 2026
ELP CL IP User Manual version E, uppdaterad: jan 2026	E		1,68 MB	jan 2026

Photometrics

	Version	Språk	Storlek	Uppladdat
ELP CL IP Photometric Files version A, uppdaterad: okt 2020	A		11,6 MB	okt 2020

Illustrations

	Version	Språk	Storlek	Uppladdat
ELP IP - 2D Dimensions (DWG) version A, uppdaterad: okt 2020	A		8,3 MB	okt 2020
ELP IP - 2D Dimensions (PDF) version A, uppdaterad: okt 2020	A		792 KB	okt 2020

Symbols

	Version	Språk	Storlek	Uppladdat
AutoCAD 3D Symbols version 2.9, uppdaterad: aug 2026	2.9		24,6 MB	aug 2026
AutoCAD 2D Symbols version 2.9, uppdaterad: aug 2026	2.9		5,2 MB	aug 2026
Vectorworks Symbols version 4.7, uppdaterad: aug 2026	4.7		286 MB	aug 2026

CAD Drawings

	Version	Språk	Storlek	Uppladdat
ELP IP 3D Files version A, uppdaterad: okt 2020	A		7,19 MB	okt 2020

BIM Objects

	Version	Språk	Storlek	Uppladdat
ELP CL IP - BIM Object version A, uppdaterad: apr 2024	A			apr 2024

Compliances

	Språk	Storlek	Uppladdat
ELP IP Listing Mark Verification Letter uppdaterad: jul 2020		147 KB	jul 2020
ELP IP Supplier's Declaration of Conformity uppdaterad: jul 2020		652 KB	jul 2020
ELP IP Declaration of Conformity uppdaterad: jul 2020		708 KB	jul 2020
ELP IP Declaration of Conformity uppdaterad: jul 2020		715 KB	jul 2020