Exterior Wash 100
Ngừng sản xuất

Đèn wash trộn màu RGBW có khả năng chịu ngoài trời

Exterior Wash 100
Hình ảnh lớn hơn

Số lượng có hạn - vui lòng liên hệ với đại lý của bạn để biết thêm thông tin

Exterior™ Wash 100 là một thiết bị chiếu sáng LED mạnh mẽ, nhỏ gọn và tiết kiệm năng lượng được thiết kế để chiếu sáng các công trình nhỏ hơn, chi tiết kiến trúc và cảnh quan. Một snoot tùy chọn rời rạc tích hợp liền mạch với thiết kế bóng bẩy của các thiết bị. Nó có màn hình tích hợp để dễ sử dụng, lựa chọn rộng rãi các góc chùm tia và được xếp hạng IP đầy đủ cho việc sử dụng ngoài trời vĩnh viễn.

Exterior Wash 100 được thiết kế cho các ứng dụng chùm tia hẹp và dựa trên các LED riêng biệt cho màu đỏ, xanh lục, xanh lam và trắng

 Tìm hiểu thêm về xác minh sản phẩm và độ tin cậy của chúng tôi

  • Cấu hình chùm tia hẹp với 6 lựa chọn góc chùm tia
  • Snoot tùy chọn rời rạc và chức năng tích hợp với thiết kế của các thiết bị
  • Điều khiển qua DMX, RDM và màn hình OLED

Video

 

 

Tính năng

  • LED Đơn sắc mạnh mẽ R, G, B, W
  • Lên đến 1800 lumens ở chế độ trắng đầy đủ (RGBW)
  • Sáu tùy chọn góc chiếu khác nhau
  • Nguồn điện và điều khiển nội bộ (DMX, RDM và màn hình OLED)
  • Vỏ chắc chắn IP66
  • Điều khiển cường độ 0–100%

Thông số kỹ thuật

  • Physical Length: 240 mm (9.5 in.) Width: 198 mm (7.8 in.) Height: 257 mm (10.2 in.) Weight: 5.0 kg (11.1 lbs.)
    Dynamic Effects Intensity: 0 - 100% Color mixing: RGBW
    Control and Programming Control systems: DMX, RDM Stand-alone control: Up to 20 scenes with global fade/hold times Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending on DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 4 x R, 5 x G, 4 x B, 5 x W single-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* LED manufacturer: Cree Beam Angle Options:

    No diffuser: 7.5°
    Narrow diffuser: 11.5°
    Medium diffuser: 22°
    Wide diffuser: 50°
    Very wide diffuser: 60°
    Asymmetric diffuser: 61° x 15°

    Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 1800 lumens*

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.05 m² including snoot Impact resistance: IK08 (with display panel cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    RoHS compliant
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 5 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 9.7 A Maximum total power consumption: 50 W Surge protection: 4 KV Max earth leakage: 0.38 mA
    Typical Power and Current 100 V, 60 Hz: 0.45 A, 42 W, PF 0.99 120 V, 60 Hz: 0.35 A, 42 W, PF 0.99 230 V, 50 Hz: 0.2 A, 42 W, PF 0.93 277 V, 60 Hz: 0.2 A, 42 W, PF 0.85 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 160 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 43 lm/W LWR*: 360 lm/kg (162 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM India: BIS
    Included Items Cover plate for control panel
    Related Items Martin Companion Cable: P/N 91616091
    Accessories Exterior Wash 100 Series, narrow diffuser kit: P/N 91610145 Exterior Wash 100 Series, medium diffuser kit: P/N 91610146 Exterior Wash 100 Series, wide diffuser kit: P/N 91610147 Exterior Wash 100 Series, very wide diffuser kit: P/N 91610148 Exterior Wash 100 Series, asymmetric diffuser kit: P/N 91610149 Exterior Wash 100 Series, glare shield / snoot: P/N 91611740 Exterior Wash 100 honeycomb louvre: P/N 91611856
    Ordering Information Exterior Wash 100, 7°, EU, aluminum: P/N 90510325 Exterior Wash 100, 7°, US, aluminum: P/N 90510340

Tải xuống

Specifications
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 100 Spec Sheet-English
en phiên bản C, cập nhật: Thg 11 2018
en  600 KB Thg 11 2018
file type icon Exterior Wash System Diagrams
en phiên bản B, cập nhật: Thg 10 2020
en  300 KB Thg 10 2020
Manuals
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 100 Series - User Manual
en phiên bản L, cập nhật: Thg 12 2020
en  2 MB Thg 12 2020
file type icon Exterior Wash 100 Serie - Bedienungsanleitung
de phiên bản A, cập nhật: Thg 7 2020
de  900 KB Thg 7 2020
file type icon Exterior Wash 100 Series - Manuel d'utilisation
fr phiên bản A, cập nhật: Thg 7 2020
fr  500 KB Thg 7 2020
Photometrics
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 100 - Photometric Files
en phiên bản A, cập nhật: Thg 3 2024
en  600 KB Thg 3 2024
Illustrations
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 100 Series (With-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  3 MB Thg 10 2020
file type icon Exterior Wash 100 Series (no-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  700 KB Thg 10 2020
file type icon Exterior Wash 100 Series (no-snoot) - 2D dimensions (DWG)
en phiên bản A, cập nhật: Thg 10 2020
en  3 MB Thg 10 2020
file type icon Exterior Wash 100 Series (With-snoot) - 2D dimensions (PDF)
en phiên bản A, cập nhật: Thg 10 2020
en  600 KB Thg 10 2020
Symbols
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon AutoCAD 2D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  4 MB Thg 1 2026
file type icon AutoCAD 3D Symbols
en phiên bản 2.8, cập nhật: Thg 1 2026
2.8  en  20 MB Thg 1 2026
file type icon Vectorworks Symbols
en phiên bản 4.6, cập nhật: Thg 1 2026
4.6  en  200 MB Thg 1 2026
CAD Drawings
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash Series 3D (3DS-STEP-DWG)
en phiên bản A, cập nhật: Thg 5 2018
en  60 MB Thg 5 2018
Compliances
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon Exterior Wash 100 Series - EU Declaration of Conformity
en phiên bản A, cập nhật: Thg 5 2018
en  90 KB Thg 5 2018
file type icon Exterior Wash Series - ETL Listing Verification
en phiên bản B, cập nhật: Thg 5 2018
en  300 KB Thg 5 2018
  400 KB Thg 5 2018
Service Notes
  Phiên bản Ngôn ngữ Kích thước Đã tải lên
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
phiên bản 4, cập nhật: Thg 10 2020
  700 KB Thg 10 2020
file type icon Exterior products - Performing a vacuum test - Tech note
en phiên bản H, cập nhật: Thg 10 2020
en  1000 KB Thg 10 2020
EW series Incorrect warning print
cập nhật: Thg 5 2018
      Thg 5 2018
Tech Notes
  Kích thước Đã tải lên
file type icon EW-Series UV Warning Printing
cập nhật: Thg 1 2018
Thg 1 2018
Firmware
  Phiên bản Kích thước Đã tải lên
download icon for Exterior Wash 100 - Firmware Exterior Wash 100 - Firmware
phiên bản 2.0.0, cập nhật: Thg 7 2026
2.0.0   Thg 7 2026

Nếu bất kỳ liên kết nào ở trên hiển thị ký tự lạ trong trình duyệt của bạn, vui lòng nhấp chuột phải vào tệp để lưu vào máy tính của bạn.

Hỗ trợ/FAQ