Martin RDM 5.5 Splitter
Udgået

5-ports DMX/RDM-splitter med 5-polet XLR-stik

Martin RDM 5.5 Splitter
Større billeder

Martin RDM 5.5 Splitter er det perfekte tilbehør til enhver controller eller DMX/RDM-enhed. Hovedformålet med Martin 5.5 Splitter er at sikre korrekt datasignaloverførsel over lange eller flere DMX-signalstrekninger. Splitteren forstærker det svage DMX-signal til dets oprindelige udgangsniveau, før det bliver for svagt til at blive læst af DMX-enheder. Afbrydelser i DMX skyldes ofte dårlige kabler eller dårlige forbindelser. Martin RDM 5.5 Splitter hjælper med at korrigere signalet.

  • 5-pin XLR indgang og udgange DMX-RDM E1.20 Splitter/Booster
  • Optoisolerede DMX udgangporte
  • Rack-, truss- og vægmonterbar

Funktioner

  • DMX-deler / forsterker
  • Opto-isolerede DMX-outputporte
  • DMX loop through-port med indbygget terminering
  • 5-pins XLR-ind- og udgange
  • RDM E1.20-kompatibel
  • Optimeret til Martin-armaturens firmwareopdatering
  • Universel strømforsyning
  • PowerCon-stik ind/ud til nem daisy-chaining
  • Monterbar på rack, truss og væg
  • Let, men robust konstruktion

Specifikationer

  • Physical Width: 220 mm (8.7 in.) Height: 45 mm (1.8 in.) Depth: 125 mm (5.0 in.) Weight: 0.9 kg (2.0 lbs.)
    Data signal DMX: ANSI E1.11 (USITT DMX 512-A) RDM : ANSI E1.20 Electrical standard: EIA-485 Recommended cable type: STP (Shielded Twisted Pair) Recommended cable gauge: 22 or 24 AWG
    Construction Housing: Aluminum Finish: Electrostatic powder-coated
    Connections Data input: 5-pin XLR male Data throughput (not amplified or branched): 5-pin XLR female Data outputs (optically isolated and amplified): 5 x 5-pin XLR female AC power input: Neutrik PowerCon AC power throughput: Neutrik PowerCon
    Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Typical power consumption: 4 W Power consumption figures are typical, not maximum. Allow for +/-10% variation.
  • Thermal Maximum ambient temperature (Ta max.): 55° C Minimum ambient temperature (Ta min.): -30° C
    Approvals EU safety: EN 60950-1 EU EMC: EN 55022, EN 55024, EN 55103-1, EN 55103-2 US safety: UL 508 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA C22.2 No. 14 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
    Included Items

    4 x screws to join two devices for rack mounting
    2 x L-brackets + 8 x screws for 19-inch rack mounting two Splitters (1U) or surface mounting
    Neutrik PowerCon NAC3FCA male input connector

    Related Items Martin™ DMX 5.3 Splitter: P/N 90758140
    Accessories Power connectors:

    Power Connector PowerCON Male: P/N 91611795
    Power Connector PowerCON Female : P/N 91611794

    Cables, 16 A, for connection to power in chains:

    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176

    (H07RN-F are European approved cables, SJOOW are US approved cables)

    Cables, 16 A, for power input:

    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178

    Installation hardware:

    Half-coupler clamp: P/N 91602005
    G-clamp:P/N 91602003
    Quick-trigger clamp: P/N 91602007
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information Martin RDM 5.5 Splitter™: P/N 90758150

Downloads

Specifications
  Sprog Størrelse Uploadet
en  250 kB okt 2020
Manuals
  Version Sprog Størrelse Uploadet
file type icon Martin DMX 5.3 Splitter - User manual
en version A, opdateret: maj 2018
en  1,1 MB maj 2018
Compliances
  Version Sprog Størrelse Uploadet
en  340 kB maj 2018
file type icon Martin RDM 5.5 Splitter- ETL Listing Verification
en version A, opdateret: maj 2018
en  51,6 kB maj 2018

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

Nyheder

HARMAN Pro Insights

Martin Architectural Lighting Transforms ABA Bank Building Along Phnom Penh Skyline feature

Martin Architectural Lighting Transforms ABA Bank Building Along Phnom Penh Skyline

ABA Bank, headquartered in Cambodia’s capital city of Phnom Penh, recently completed a major phase of growth and development in which they acquired several rented buildings, a mix of back and front-line offices and a suite of exclusive executive spaces. As part of the developments,

CONTINUE READING

Support/FAQ

HARMAN Professional Solutions: