Martin Exterior Projection Pro Compact

Gambar Lebih Besar

Martin Exterior Projection Pro Compact adalah proyektor gambar outdoor generasi terbaru yang dirancang untuk menginspirasi kreativitas yang menawan dan keserbagunaan di berbagai aplikasi arsitektur, façade, dan lanskap.

Menampilkan desain modular dengan 11 opsi yang dapat dikonfigurasi dan hingga empat lapisan efek, termasuk framing façade presisi, fixture ini menawarkan spektrum luas kemungkinan kreatif sambil meminimalkan kompleksitas dan biaya. Jejak kompak dan desainnya yang ringan memfasilitasi pemasangan tiang dan integrasi mulus ke berbagai setup, memberikan berbagai kemungkinan aplikasi. Penampilan fixture yang ramping dan profesional memastikan dapat menyesuaikan diri dengan sempurna ke lingkungan apa pun.

Sistem zoom bawaan memungkinkan penyesuaian presisi sudut proyeksi dari 15° hingga 45°, didukung oleh sistem optik yang sangat efisien yang secara konsisten memberikan 5.200 lumens di seluruh jangkauan zoom. Dirancang untuk efisiensi energi maksimum, fixture ini mencakup mode daya hibernasi khusus, diaktifkan melalui saluran kontrol DMX, secara signifikan mengurangi konsumsi daya saat tidak digunakan.

Memberdayakan pengguna dengan kontrol atas berbagai efek dinamis—termasuk zoom, fokus, warna, gobo, dan animasi—Exterior Projection Pro Compact menginspirasi aplikasi paling kreatif. Menggunakan modul framing opsional, gambar proyeksi dapat diframing untuk secara presisi mencocokkan façade. Kontrol cerdas menampilkan saklar magnetik, DMX, RDM, dan pemrograman standalone melalui Martin Companion memastikan konfigurasi dan pemrograman yang mudah.

Dirancang untuk memenuhi standar lingkungan yang ketat, fixture ini mengurangi jejak karbonnya melalui sistem optik efisien, kemasan bersertifikat FSC, dan kemampuan perbaikan penuh. Dirancang untuk instalasi outdoor permanen, ini sepenuhnya rated outdoor untuk menahan kondisi lingkungan paling berat dan didukung oleh garansi penuh 5 tahun Martin.

Dengan desain modular, faktor bentuk kompak, dan fitur mutakhir, fixture ini adalah solusi yang sangat canggih dan hemat biaya. Ideal untuk desainer pencahayaan arsitektur, arsitek, integrator sistem, dan kontraktor listrik, ini menawarkan performa tak tertandingi, keserbagunaan, dan operasi yang mudah digunakan.

Video

Fitur

Flat-field, high-contrast image projection
5,200 lumens output across the entire zoom range
Efficient optical system with integrated 15° - 45° zoom system
Configurable design for reduction of resources, cost, and weight
One gobo or four gobo modules
Animation module
Manual framing module for precise framing of projected image
0-100% electronic dimming
Hibernation mode for very low power consumption
Compact and slim design
RDM and DMX control
Local diagnostics and focusing via magnetic sensor
Dedicated compartment for install of Power and DMX In/Out cables
Optional PD Hybrid In/Out cable solution for easy daisy-chain
Automatic thermal management for safe operation in high and low ambient temperatures
Fully-weatherized housing (IP66, IK08 and C-5 High corrosion rating)
Shipped in FSC-certified cardboard packaging
5-year warranty

Spesifikasi

Physical Length: 342 mm (13.5 inch.) Width: 272 mm (10.7 inch.) Height: 335 mm (13.2 inch.) Weight: 12.5-13.9 kg (27.5–30.6 lbs)
depending on actual configuration Weight depends on actual configuration

Dynamic Effects Color wheel: 5 dichroic colors (red, green, blue, yellow, CTO) + open Zoom: Motorized, 15° - 45° beam angle Dimming: 0-100% electronic Shutter: Strobe and pulse effects, instant open and blackout Focus: Motorized, variable 3 m (9.8 ft.) to infinity Accessory 1-gobo module: indexing, variable rotation Accessory 4-gobo module: selection, indexing, variable rotation Accessory animation module: Continuous rotation with variable speed and direction (always in aperture) Accessory Framing module: 4 blades for manual adjustment of insert and angle (8 finger knobs with locking mechanism)

Control and Programming User interface: Magnetic sensor to call up fixture status and focus fixture Stand-alone control: Up to 20 scenes with individual fade/ hold times Control options: DMX, RDM, stand-alone Configuration, addressing and status: Via RDM 8-bit control: Color and gobo selection 16-bit control: Gobo indexing and rotation, Animation, Focus, Zoom and Intensity DMX channels: 13/14 (Basic / Extended) DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20

Optics
Light source: 130W White light LED engine
LED lifetime: minimum 30,000 hours (to >70% luminous output)*
Full Zoom Range: 15° - 45° (Field Angle)
*Figure obtained under manufacturer's test conditions

Photometric Data
CRI (Color Rendering Index) : >70
Color Temperature: 7,500 K
Fixture Luminous Output: 5,200 lumens
Light Engine Luminous Output: 13,000 lumens
LED Refresh Rate: 2,400 Hz.
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

Construction Housing:
Cast aluminum
Finish: Hard anodized Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass Ingress protection: IP66 Impact resistance: IK08 Corrosion resistance: C5 (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31) EPA (Effective Projected Area): 0.1 m2 Color options: Traffic Grey RAL 7042, Traffic White RAL 9016, Traffic Black RAL 9017
Service Lid for gobo change or insert of accessory effect modules

Gobos Suitable material: Borosilicate glass, coatings heatresistant to 450°C (842° F) Gobo diameter: 19.0 mm +0/-0.3 mm (0.74 in. +0/-0.02 in.) Maximum image diameter: 15 mm (0.59 in.) Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.) Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.) Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in) HT paint

Gobos and Color Frame

Installation Mounting: Adjustable yoke Orientation: Any, except horizontal angles above 70° Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections Power cable entry: IP68 cable gland (accepts 8 mm-12 mm) Power connection: Terminal for power in separate compartment Data cable entry: Terminal for power in separate compartment Data connection: Terminal for data in separate compartment
Electrical
AC power: 100-240/277 V nominal, 50/60 Hz
Power supply: Auto-ranging electronic switch-mode
Surge protection: 4 KV
Max earth-leakage current: 0.4 mA
Power factor: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Max current draw: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Typical current draw: 1.48 A @110 V, 0.71 A @230 V, 0.63 A @ 277 V *
Power Consumption
Maximum: 180 W
Typical: 160 W *
Idle: 10 W *
Hibernation: 3 W *
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Typical: full output, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

Thermal Cooling: Convection and forced air (temperature regulated) Maximum surface temperature: 60° C (140° F) Maximum ambient temperature (Ta max.): 45° C (113° F) * Minimum ambient temperature (Ta min.): -30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard outer packaging Efficacy (max output): 32.9 lm/W LWR*: 416 lm/kg (189 lm/lbs.)
*LWR = Lumen-to-Weight Ratio

Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032(Class B),EN55035, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: ANSI/UL 1598 US EMC: CFR 47 Part 15 Class B Canadian safety: CSA C22.2 No 250.13 Canadian EMC: CAN ICES (B)/ NMB(B) Australia/NZ: RCM Thailand: TISI 1955-2551 BIS certification: (Pending) Korea: KS C 9832, KS C 9835

Included Items
4 pcs Insulated ferrules crimp terminal connectors for Power
4 pcs Insulated ferrules crimp terminal connectors for Data
1 pcs desiccant sachet
1 pcs Multi-Language Safety and Installation Manual

Related Items Martin Companion Cable (for firmware update over DMX): P/N 91616091 Martin Companion Software: free download from www.martin.com

Ordering Information - Fixtures Exterior Projection Pro Compact, Grey: MAR-90560250 Exterior Projection Pro Compact, White: MAR-90560251 Exterior Projection Pro Compact, Black: MAR-90560252

Ordering Information - Accessory Modules Manual framing module: MAR-90560260 Animation Module: MAR-90560261 One gobo holder module: MAR-90560262 Four gobo wheel module: MAR-90560263

Ordering Information - Accessories Hybrid PD cable tail In/Out 0.5 m, black: MAR-91700020 Hybrid PD cable tail In/Out 0.5 m, white: MAR-91700022 Junction Box Power DMX to PD: P/N MAR-91700019

Ordering Information - Related Items Glareshield Black: MAR-90560264 Exterior Multitool: MAR-90590025 Attachment plate for safety wire: MAR-90590050 Gobo ring D19 EP Compact - Set of 10: MAR-90560270 Animation wheel w open hole - Set of 5: MAR-90560271

Unduhan

Specifications

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - Spec Sheet versi D, diperbarui: Jan 2026	D		2,07 MB	Jan 2026
Descriptive Specs - Exterior Projection Pro Compact versi A, diperbarui: Mei 2025	A		103 KB	Mei 2025

Manuals

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - Manual de Usuario incluye Manual de Seguridad e Instalación versi A, diperbarui: Jul 2025	A		3,58 MB	Jul 2025
Exterior Projection Pro Compact - Guide de l’utilisateur avec Guide d’installation et de sécurité inclus versi A, diperbarui: Jul 2025	A		4,57 MB	Jul 2025
Exterior Projection Pro Compact - User, Safety and Installation manual versi A, diperbarui: Jul 2025	A		3,39 MB	Jul 2025
Exterior Projection Pro Compact - Bedienungsanleitung mit Installations- und Sicherheitshinweisen versi A, diperbarui: Jul 2025	A		3,63 MB	Jul 2025

Photometrics

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - Photometric Files versi B, diperbarui: Apr 2025	B		5,1 MB	Apr 2025

Illustrations

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - 2D dimensions (PDF) versi B, diperbarui: Mar 2025	B		717 KB	Mar 2025
Exterior Projection Pro Compact - 2D dimensions (DWG) versi B, diperbarui: Mar 2025	B		2,79 MB	Mar 2025
Line it up Gobo Design - 2D dimensions (EPS_PNG) versi A, diperbarui: Apr 2025	A		392 KB	Apr 2025

Symbols

	Versi	Bahasa	Ukuran	Diunggah
AutoCAD 2D Symbols versi 2.8, diperbarui: Jan 2026	2.8		4,42 MB	Jan 2026
AutoCAD 3D Symbols versi 2.8, diperbarui: Jan 2026	2.8		18,7 MB	Jan 2026
Vectorworks Symbols versi 4.6, diperbarui: Jan 2026	4.6		249 MB	Jan 2026
Martin Professional GDTF Library versi A, diperbarui: Okt 2023	A		203 Byte	Okt 2023

CAD Drawings

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - 3DS versi B, diperbarui: Okt 2025	B		19,6 MB	Okt 2025
Exterior Projection Pro Compact - 3D DWG versi B, diperbarui: Okt 2025	B		17,5 MB	Okt 2025

BIM Objects

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - BIM Object versi A, diperbarui: Agu 2025	A			Agu 2025

Compliances

	Versi	Bahasa	Ukuran	Diunggah
Exterior Projection Pro Compact - CB Test Certificate versi A, diperbarui: Mar 2025	A		107 KB	Mar 2025
Exterior Projection Pro Compact - ETL Listing Verification versi A, diperbarui: Mar 2025	A		480 KB	Mar 2025
Exterior Projection Pro Compact - EU Declaration of Conformity versi A, diperbarui: Mar 2025	A		219 KB	Mar 2025
Exterior Projection Pro Compact - UKCA Declaration of Conformity versi A, diperbarui: Mar 2025	A		152 KB	Mar 2025
Exterior Projection Pro Compact - Product Verification and Reliability Report versi C, diperbarui: Apr 2026	C		661 KB	Apr 2026