长度:
342 mm (13.5 inch.)
宽:
272 mm (10.7 inch.)
高:
335 mm (13.2 inch.)
重量:
12.5-13.9 kg (27.5–30.6 lbs)
depending on actual configuration
Weight depends on actual configuration
Color wheel:
5 dichroic colors (red, green, blue, yellow, CTO) + open
Zoom:
Motorized, 15° - 45° beam angle
调光参数:
0-100% electronic
Shutter:
Strobe and pulse effects, instant open and blackout
Focus:
Motorized, variable 3 m (9.8 ft.) to infinity
Accessory 1-gobo module:
indexing, variable rotation
Accessory 4-gobo module:
selection, indexing, variable rotation
Accessory animation module:
Continuous rotation with variable speed and direction (always in aperture)
Accessory Framing module:
4 blades for manual adjustment of insert and angle (8 finger knobs with locking mechanism)
User interface:
Magnetic sensor to call up fixture status and focus fixture
Stand-alone control:
Up to 20 scenes with individual fade/ hold times
Control options:
DMX, RDM, stand-alone
Configuration, addressing and status:
Via RDM
8-bit control:
Color and gobo selection
16-bit control:
Gobo indexing and rotation, Animation, Focus, Zoom and Intensity
DMX channels:
13/14 (Basic / Extended)
DMX compliance:
USITT DMX512-A
RDM compliance:
ANSI/ESTA E1.20
Light source: 130W White light LED engine
LED lifetime: minimum 30,000 hours (to >70% luminous output)*
Full Zoom Range: 15° - 45° (Field Angle)
*Figure obtained under manufacturer's test conditions
CRI (Color Rendering Index) : >70
Color Temperature: 7,500 K
Fixture Luminous Output: 5,200 lumens
Light Engine Luminous Output: 13,000 lumens
LED Refresh Rate: 2,400 Hz.
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
Housing:
Cast aluminum
外观颜色:
Hard anodized
Front glass:
5 mm (0.2 in.) anti-reflection coated tempered glass
Ingress protection:
IP66
Impact resistance:
IK08
Corrosion resistance:
C5 (very high corrosivity / marine, ISO 12944)
Vibration resistance:
1G, Sinusoidal (IEC 60068-2-6)
0.7G RMS Random (IEC 60068-2-64), 3G (ANSI C136-31)
EPA (Effective Projected Area):
0.1 m2
Color options:
Traffic Grey RAL 7042, Traffic White RAL 9016, Traffic Black RAL 9017
Service Lid for gobo change or insert of accessory effect modules
Suitable material:
Borosilicate glass, coatings heatresistant to 450°C (842° F)
Gobo diameter:
19.0 mm +0/-0.3 mm (0.74 in. +0/-0.02 in.)
Maximum image diameter:
15 mm (0.59 in.)
Glass gobo thickness, minimum:
1.1 mm ±0.1 mm (0.045 ±0.004 in.)
Glass gobo thickness, maximum:
3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)
Aluminum gobo thickness:
0.5 mm ± 0.02 mm (0.020 in. ± 001 in) HT paint
装配:
Adjustable yoke
Orientation:
Any, except horizontal angles above 70°
Minimum distance to illuminated surfaces:
0.5 m (20 in.)
Power cable entry:
IP68 cable gland (accepts 8 mm-12 mm)
Power connection:
Terminal for power in separate compartment
Data cable entry:
Terminal for power in separate compartment
Data connection:
Terminal for data in separate compartment
AC power: 100-240/277 V nominal, 50/60 Hz
Power supply: Auto-ranging electronic switch-mode
Surge protection: 4 KV
Max earth-leakage current: 0.4 mA
Power factor: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Max current draw: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
Typical current draw: 1.48 A @110 V, 0.71 A @230 V, 0.63 A @ 277 V *
Power Consumption
Maximum: 180 W
Typical: 160 W *
Idle: 10 W *
Hibernation: 3 W *
*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Typical: full output, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.
Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.
散热:
Convection and forced air (temperature regulated)
Maximum surface temperature:
60° C (140° F)
Maximum ambient temperature (Ta max.):
45° C (113° F) *
Minimum ambient temperature (Ta min.):
-30° C (-22° F)**
*Above this temperature, the fixture regulates output to protect from overheating.
**For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)
RoHS:
Compliant
REACH:
Compliant
WEEE:
Compliant
Proposition 65:
Compliant
FSC:
Certified cardboard outer packaging
Efficacy (max output):
32.9 lm/W
LWR*:
416 lm/kg (189 lm/lbs.)
*LWR = Lumen-to-Weight Ratio
Global CB Certification/IECEE:
IEC 60598-2-5 (IEC 60598-1)
EU safety:
EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
EU EMC:
EN 55015, EN 55032(Class B),EN55035, EN 61000-3-2, EN 61000-3-3, EN 61547
US safety:
ANSI/UL 1598
US EMC:
CFR 47 Part 15 Class B
Canadian safety:
CSA C22.2 No 250.13
Canadian EMC:
CAN ICES (B)/ NMB(B)
Australia/NZ:
RCM
Thailand:
TISI 1955-2551
BIS certification:
(Pending)
Korea:
KS C 9832, KS C 9835
4 pcs Insulated ferrules crimp terminal connectors for Power
4 pcs Insulated ferrules crimp terminal connectors for Data
1 pcs desiccant sachet
1 pcs Multi-Language Safety and Installation Manual
Martin Companion Cable (for firmware update over DMX):
P/N 91616091
Martin Companion Software:
free download from www.martin.com
Exterior Projection Pro Compact, Grey:
MAR-90560250
Exterior Projection Pro Compact, White:
MAR-90560251
Exterior Projection Pro Compact, Black:
MAR-90560252
Manual framing module:
MAR-90560260
Animation Module:
MAR-90560261
One gobo holder module:
MAR-90560262
Four gobo wheel module:
MAR-90560263
Hybrid PD cable tail In/Out 0.5 m, black:
MAR-91700020
Junction Box Power DMX to PD:
P/N MAR-91700019
Glareshield Black:
MAR-90560264
Exterior Multitool:
MAR-90590025
Attachment plate for safety wire:
MAR-90590050
Gobo ring D19 EP Compact - Set of 10:
MAR-90560270
Animation wheel w open hole - Set of 5:
MAR-90560271
版本 A,
更新: 5月 2025
版本 A,
更新: 7月 2025
版本 A,
更新: 7月 2025
版本 A,
更新: 7月 2025
顾问支持
