Top ring (trim ring):
Flush-mount top ring outer diameter: 329 mm (13.0 in.)
Flush-mount top ring thickness: 7 mm (0.3 in.)
Beveled top ring outer diameter: 340 mm (13.4 in.)
Beveled top ring thickness: 5 mm (0.2 in.)
Installation Sleeve:
Installation sleeve height: 400 mm (15.8 in.) Installation sleeve base flange external diameter: 416 mm (16.4 in.)
Fixture:
Height: 315 mm (12.4 in.)
Outer diameter at top of fixture: 310 mm (12.2 in.)
Weight: 14.7 kg (32.5 lbs.)
All models:
Intensity: 0 - 100%
Exterior Inground 400 and 410:
Color mixing: RGBW
Exterior Inground 420:
Color temperature control: 2700 K - 6500 K
All Models:
Control systems: DMX, RDM
DMX addressing and fixture setup: RDM
Fixture status monitoring: Multi-color status LED visible through top glass
Firmware update: Serial upload via DMX link
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: RS-485
Exterior Inground 400 and 410 :
DMX channels: 3/4
Exterior Inground 420 :
DMX channels: 2
All models :
LED manufacturer: Cree
Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
*Figure obtained under manufacturer's test conditions
Exterior Inground 400 :
Light source: R, G, B and W single-color LEDs
Beam angle options
Narrow diffuser: 10.5°
Medium diffuser: 20°
Wide diffuser: 41°
Asymmetric diffuser: 52° x 12°
Directional (8°): 67° x 24°
Directional (20°): 69° x 24°
Exterior Inground 410:
Light source: RGBW quad-color LEDs
Beam angle options
Narrow diffuser: 22°
Medium diffuser: 29°
Wide diffuser: 50°
Asymmetric diffuser: 59° x 25°
Directional (8°): 76° x 33°
Directional (20°): 79° x 33°
Exterior Inground 420 :
Light source: Warm (2700 K) and cool (6500 K) LEDs
Beam angle options
Narrow diffuser: 10.5°
Medium diffuser: 20°
Wide diffuser: 41°
Asymmetric diffuser: 52° x 12°
Directional (8°): 67° x 24°
Directional (20°): 69° x 24°
CRI (Color Rendering Index) :
> 70
CCT:
6500 K (White LED)
Exterior Inground 400 :
Maximum luminous output: 5700 lumens
Exterior Inground 410 :
Maximum luminous output: 4800 lumens
Exterior Inground 420 :
Maximum luminous output: 6600 lumens
Fixture housing:
Aluminum
Color:
Black
Finish:
Black powder coating over anodizing
Trim ring (top ring):
Stainless steel
Protection rating:
IP67
Front glass:
19 mm (0.8 in.) tempered glass (clear and anti-skid versions)
Impact resistance:
IK10
Corrosion resistance:
C5-M (very high corrosivity / marine, ISO 12944)
Vibration resistance:
1.0g, Sinusoidal (IEC 60068-2-6)
0,7g RMS Random (IEC 60068-2-64)
Installation sleeve:
Hot-dip galvanized steel
Weight resistance (in installation sleeve with stable groundwork):
4000 kg (from vehicle tire for example)
RoHS compliant
Minimum distance to illuminated surfaces:
0.2 m (0.6 ft.)
Installation method:
Installation sleeve (ordered separately)
Power connection:
1.8 m (5.9 ft.) cable tail without connector
Data connection:
1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail
Power and data cable entries:
IP68/69 cable glands
AC power:
100-277 V~ nominal, 50/60 Hz
Power supply unit:
Integrated, auto-sensing multi-voltage
Power Consumption:
11 W (steady state, all LEDs at zero intensity)
Typical half-cycle RMS inrush current at 230 V, 50 Hz:
1.6A
Surge protection:
4 KV
120 V, 60 Hz:
1.3 A, 142 W, PF 0.99
230 V, 50 Hz:
0.7 A, 142 W, PF 0.97
Measurements made at nominal voltage. Allow for a deviation of +/- 10 %.
Cooling:
Conduction / convection
Maximum ambient temperature (Ta max.):
45° C (113° F)
Minimum ambient temperature (Ta min.):
-30° C (-4° F), power must be maintained below 0° C (32° F)
Maximum surface temperature, steady state, at 40° C ambient:
65° C (149° F)
Total heat dissipation (calculated, +/- 10%):
490 BTU/hr.
Global CB Certification/IECEE:
IEC 60598-2-13 (IEC 60598-1)
EU safety:
EN60598-2-5 (EN60598-1), EN60598-2-13, EN62471, EN62493
EU EMC:
EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5
US safety:
ANSI/UL 1598
US EMC:
47 CFR Part 15 Class A
Canadian safety:
CSA C.22.2 No. 250
Australia/NZ:
RCM
Martin Companion Cable:
P/N 91616091
Martin Companion Software Suite (including firmware uploader)
Installation sleeve for Inground 400:
P/N 91611841
Installation Lid for flush mount top ring installations:
P/N 91616086
Installation Lid for beveled top ring installations:
P/N 91616087
Please order Installation Sleeves separately from fixtures.
Inground 4xx, new install:
P/N 90507100HU
Inground 4xx, replacement (for existing Inground 200 installations):
P/N 90507150HU
Inground 4xx, replacement (for existing Inground 200 installations), no top ring or top glass:
P/N 90507110HU
Products are ordered pre-configured by selecting from a range of options - see elsewhere on website or contact your Martin™ supplier.
버전 A,
업데이트: 2020년 10월
버전 C,
업데이트: 2020년 10월
버전 C,
업데이트: 2020년 10월
컨설턴트 지원
