• Physical

  MAC One Fixture
  Width (across yoke): 226 mm (8.90 in.)
  Width (base): 254 mm (10.00 in.)
  Height (head forward): 297 mm (11.69 in.)
  Height (maximum): 349 mm (13.74 in.)
  Depth (head): 220 mm (8.66 in.)
  Depth (base): 177 mm (6.97 in.)
  Minimum center-to-center distance in side-by-side installation: 300 mm (11.81 in.)
  Weight: 4.40 kg (9.70 lbs.)

  MAC One Family Fourbar
  Length: 1168 mm (45.98 in.)
  Length (installed end-to-end): 1200 mm (47.24 in.)
  Width: 88 mm (3.46 in.)
  Height (without feet): 42 mm (1.65 in.)
  Height (with feet): 60 mm (2.36 in.)
  Weight: 3.20 kg (7.05 lbs.)

  MAC One Family VDO Grid Mount Ring
  Width: 282 mm (11.10 in.)
  Width (installed side-to-side): 300 mm (11.81 in.)
  Height: 282 mm (11.10 in.)
  Height (installed side-to-side): 300 mm (11.81 in.)
  Depth: 80 mm (3.15 in.)
  Weight: 0.75 kg (1.65 lbs.)

  MAC One Family Dual VDO Header
  Length: 568 mm (22.36 in.)
  Length (installed end-to-end): 600 mm (23.62 in.)
  Width: 85 mm (3.35 in.)
  Height: 58 mm (2.28 in.)
  Weight: 2.20 kg (4.85 lbs.)

  MAC One Family Single VDO Adapter
  Length: 50 mm (1.97 in.)
  Width: 57 mm (2.24 in.)
  Height: 58 mm (2.28 in.)
  Weight: 0.20 kg (0.44 lbs.)

  Dynamic Effects

  Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
  Beam Dimming options: Choice of four dimming curves
  Beam Color Mixing: RGB, independently variable 0 - 100%
  Beam Color Temperature Control: Variable 2,000 – 12,850 K
  Beam Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
  Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
  Zoom: Motorized with 1:5 zoom ratio, including zoom pulse effect
  Pan: Motorized 540°
  Tilt: Motorized 225°
  Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
  Backlight Dimmer/Shutter: 0 – 100% continuous dimming, regular and random strobe, instant open and blackout
  Backlight Dimming options: Choice of four dimming curves
  Backlight Color Mixing: RGB, independently variable 0 - 100%
  Backlight Color Temperature Control: Variable 2,000 – 12,850 K
  Backlight Tint Control: Variable green-magenta shift Δuv -0.05 – +0.05
  Backlight Virtual Color wheel: 48 color presets, continuous rotation & random color
  Backlight PixelMapping: Individual RGB control of each of the 24 Backlight pixels
  Backlight P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
  Pre-programmed effects: Two ranges of FX on Beam, Backlight or Combination; independent or synchronized/combined
  LED Frequency control: Variable LED PWM control

  Control and Programming

  Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and Martin P3
  Protocol Detection: Automatic
  DMX Modes: Compact, Basic, Ludicrous & Compact Direct
  DMX Channels: 20, 36, 108 & 20
  Multi-Universe Overflow: Yes, in all DMX Modes
  16-bit Controllable Parameters: Beam & Backlight Dimming, Beam Color Mixing, Zoom, Pan and Tilt
  Setting and Addressing: Display Menu, RDM, RDM over Art-Net or Martin P3
  Local User Interface: Backlit LCD Display with battery-powered operation
  Fixture identification: User-settable ID number
  DMX Compliance: USITT DMX512-A
  RDM Compliance: ANSI/ESTA E1.20
  Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
  sACN Compliance: ANSI E1.31 - 2016
  Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
  DMX/RDM Transceiver: Galvanic-isolated RS-485
  DMX/RDM Daisy-Chain Limit: 32 fixtures
  Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
  Ethernet Daisy-Chain Limit Recommendation: 50 fixtures
  Firmware Update: via DMX using Martin Companion or via Ethernet using Martin Companion / P3 System Controller

  Optics

  Front Lens Diameter: 150 mm (5.91 in.)
  Zoom Range: 1:5
  Full Zoom Range at Half Peak (Beam Angle): 4° - 19°
  Full Zoom Range at Tenth Peak (Field Angle): 6° - 27°
  Beam Light Source: 1 x 120 W RGBL LED
  Backlight Light Source: 24 x 0.25 W RGB LED
  Max. Total Beam LED Engine Power: 120 W
  Max. Total Backlight LED Engine Power: 6 W
  Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
  *Figure obtained under manufacturer's test conditions

  Photometric Data

  Light Engine Luminous Output: 5,700 lumens
  Fixture Luminous Output Wide: 2,500 lumens
  Fixture Luminous Output Narrow: 1,900 lumens
  Peak Luminous Intensity Narrow: 375,000 cd
  CCT: Variable 2,000 K – 12,850 K (+/- 200 K)
  CRI (Color Rendering Index) (default): ≥ 77
  CRI (Color Rendering Index) (optimized): ≥ 86
  CQS (Color Quality Scale) (default): ≥ 86
  CQS (Color Quality Scale) (optimized): ≥ 89
  TM-30 Rf (IES TM-30-15 Fidelity Index) (default): ≥ 80
  TM-30 Rf (IES TM-30-15 Fidelity Index) (optimized): ≥ 84
  TM-30 Rg (IES TM-30-15 Gamut Index) (default): ≥ 114
  TM-30 Rg (IES TM-30-15 Gamut Index) (optimized): ≥ 105
  TLCI (Television Lighting Consistency Index) (default): ≥ 68
  TLCI (Television Lighting Consistency Index) (optimized): ≥ 87
  Beam LED Refresh Rate: 2,400 Hz with adjustment (+/- 2%) via DMX
  Backlight LED Refresh Rate: 1,200 Hz
  Binning: Tight color and flux binning
  Calibration: Full Gamut Color Calibration of Beam and Backlight
  Color Modes: Direct Color Mode, Extended Gamut Mode and Calibrated Color Mode
  * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
  * All Photometric Data measured at 6500 K white
  

  Construction Housing: High-impact flame-retardant thermoplastic Color: Black Protection rating: IP20
  Installation

  Mounting options: clamps on fixture, omega on fixture, fourbar or VDO grid mount ring
  Mounting points on Fixture: 1 pair of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega bracket and two M12 threaded holes
  Mounting points on Fourbar: 1 fixed and 2 repositionable M12 threaded holes
  Mounting points on VDO Grid Mount Ring: 6 receivers for VDO Couplers (compatible with VDO Atomic Bold/Dot)
  Mounting points on Dual VDO Header: 2 repositionable M12 threaded holes and 4 receivers for VDO Couplers (compatible with VDO Grid Mount Ring and VDO Atomic Bold/Dot)
  Mounting points on Single VDO Adapter: 1 fixed M12 threaded hole, 4 fixed M6 threaded holes and 1 receiver for VDO Coupler (compatible with VDO Grid Mount Ring and VDO Atomic Bold/Dot)
  Maximum vertical column height in VDO Grid Mount Rings: 12 fixtures
  Location: Indoor or outdoor protected from elements
  Orientation: Any
  Minimum distance to combustible materials: 0.20 m (7.87 in.)
  Minimum distance to illuminated surfaces: 1.75 m (68.90 in.)

  Connections AC mains power in/thru: Neutrik powerCON TRUE1 TOP DMX and RDM data in/thru: Neutrik 5-pin locking XLR Ethernet (Art-Net, sACN and P3) in/thru, including fail-safe bypass: Neutrik etherCON
  Electrical

  AC power: 100-240 V AC nominal, 50/60 Hz
  Power supply unit: Auto-ranging electronic switch mode
  Typical half-cycle RMS inrush current at 230 V, 50 Hz: 3.5 A
  Typical earth-leakage current: 0.50 mA
  Power Factor: 0.99 @ 100V , 0.98 @ 120V , 0.94 @ 208V , 0.92 @ 230V , 0.88 @ 240V
  Max current draw: 2.0 A @ 100V / 120V, 0.9 A @ 208V / 230V / 240V
  Typical current draw: 1.6 A @ 100 V , 1.4 A @ 120 V , 0.9 A @ 208 V , 0.8 A @ 230 V , 0.8 A @ 240 V *
  Power Consumption
  Maximum: 180 W
  Typical: 160 W *
  Idle: 24 W *
  Hibernation: 9 W *
  * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  Typical: full output white, no effects moving, regulated fan speed.
  Idle: no output, no effects moving, regulated fan speed.
  Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

• Thermal Cooling: Forced air (temperature regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 546 BTU/hr.
  Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 26.3 dB(A) Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 23.0 dB(A)
  Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inner and outer packaging Efficacy (max output): 21.4 lm/W LWR*: 568 lm/kg (258 lm/lbs.)

  LWR = Lumen-to-Weight Ratio

  Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015; EN 55032; EN 55035; EN 61547; EN 61000-3-3 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM United Kingdom: UKCA Thailand: TIS 1955-2551 Korea: KS C 9832, KS C 9835
  Included Items

  Single omega bracket with 1/4 turn fasteners for rigging clamp attachment
  SoftLens
  Multi-Language Safety and Installation Manual

  Related Items

  MAC One Beam in dual SiP: P/N MAR-90250505HU
  MAC One Beam in Cardboard: P/N MAR-90250500HU
  MAC One Beam white in Cardboard: P/N MAR-90250510HU
  VDO Atomic Bold in cardboard: P/N MAR-90357703
  VDO Atomic Dot CLD in cardboard: P/N 90357701
  VDO Atomic Dot WRM in cardboard: P/N 90357702
  Martin Companion Cable (for firmware update over DMX): P/N 91616091
  Martin Companion Software (for firmware update over DMX/Ethernet): Free download from www.martin.com

  Accessories

  Transport and Storage
  Flightcase for 8 x MAC One (fits MAC One Beam and MAC One): P/N MAR-91515058
  Additional dual SiP Foam Flightcase Insert for MAC One Beam and MAC One: P/N MAR-91611865HU

  Consumables
  CR123A 3-volt lithium battery: P/N 05801011

  Spare Parts
  Additional MAC One SoftLens: P/N 5137039-00

  Power Input Cables
  Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91611797
  Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.) P/N 91610173

  Power Linking Cables
  Power relay cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796
  Power relay cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172

  Power Connectors
  Cable Connector, Neutrik powerCON TRUE1 TOP Female: P/N 91611789HU
  Cable Connector, Neutrik PowerCON TRUE1 TOP Male: P/N 91611788HU

  PDE Adapter Cables (for use in matrix with VDO Atomic Bold/Dot)
  BreakIn Cable Power-DMX-Ethernet to PDE: P/N MAR-91700000
  BreakOut Cable PDE to Power-DMX-Ethernet: P/N MAR-91700001

  Installation Hardware
  MAC One Family Fourbar: P/N MAR-91616127HU
  MAC One Family VDO Grid Mount Ring: P/N MAR-91616128HU
  Set of 10 VDO Couplers: P/N MAR-91616129HU
  Dual VDO Header: P/N MAR-91616130HU
  Set of 10 Single VDO Adapters: P/N MAR-91616135
  G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
  Quick Trigger Clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
  Half-coupler Clamp: P/N 91602005
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
  Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

  Verified Third-Party Accessories

  Beam Control
  MAC One Concentric Ring: P/N City Theatrical 2810
  MAC One Hexcel Louver: P/N City Theatrical 2811
  MAC One Top Hat: P/N City Theatrical 2812

  Ordering Information MAC One in dual SiP (in cardboard box with dual SiP foam flight case insert): P/N MAR-90250205HU (to be ordered in multiples of 2) MAC One in Cardboard (in cardboard box with cardboard inlay): P/N MAR-90250200HU MAC One white in Cardboard (in cardboard box with cardboard inlay): P/N MAR-90250210HU

• 
  28 พฤศจิกายน 2023
  Martin Professional Introduces MAC One Creative BeamWash Moving Head with Fresnel Lens

Martin MAC One: Propelling Stage Lighting Creativity to the Razor’s Edge

Unlocking Next Level Lighting Designs with All New Martin P3 Visual Control Platform

• ลงทะเบียน MAC One ของคุณ
• ติดต่อฝ่ายสนับสนุนทางเทคนิค
• ศูนย์ช่วยเหลือตลอด 24 ชั่วโมง