Exterior Projection Pro Compact

Udendørs projektor med konfiguerbar billede

Exterior Projection Pro Compact

Martin Exterior Projection Pro Compact er en næstegenerations udendørs billedprojektor designet til at inspirere fængslende kreativitet og alsidighed på tværs af et bredt spektrum af arkitektoniske, facadebygnings- og landskabsapplikationer.

Med et modulært design med 11 konfigurbare muligheder og op til fire lag af effekter, herunder præcis facaderamning, tilbyder armaturen et bredt spektrum af kreative muligheder samtidig med at kompleksiteten og omkostningerne minimeres. Dens kompakte fodaftryk og lette design gør mastemontering og problemfri integration i forskellige opsætninger mulig og leverer flere applikationsmuligheder. Armaturens elegant, professionelle udseende sikrer, at den glider ubesværet ind i ethvert miljø.

Det indbyggede zoomsystem muliggør præcis justering af projektionsvinklen fra 15° til 45°, understøttet af et ultraeffektivt optisk system, der konsekvent leverer 5.200 lumen på tværs af hele zoomområdet. Konstrueret til maksimal energieffektivitet inkluderer armaturen en dedikeret dvalemagttilstand, aktiveret via DMX-kontrolkanalen, som reducerer strømforbruget betydeligt, når den ikke er i brug.

Ved at give brugerne kontrol over flere dynamiske effekter—herunder zoom, fokus, farver, gobos og animationer—inspirerer Exterior Projection Pro Compact de mest kreative applikationer. Ved hjælp af det valgfrie rammemodul kan det projicerede billede rammes præcist for at matche facaden. Smarte kontrolelementer indeholder en magnetisk kontakt, DMX, RDM og standalone-programmering via Martin Companion, hvilket sikrer ligetil konfiguration og programmering.

Konstrueret til at opfylde strenge miljøstandarder reducerer armaturen sit kulstofaftryk gennem dets effektive optiske system, FSC-certificeret emballage og fuld repraerabilitet. Designet til permanente udendørsinstallationer er det fuldstændigt udendørsvurderet til at modstå de hårdeste miljøforhold og bakkes op af Martins fulde 5-års garanti.

Med sit modulære design, kompakte formfaktor og banebrydende funktioner er armaturen en utrolig avanceret og omkostningseffektiv løsning. Ideel til arkitektoniske belysningsdesignere, arkitekter, systemintegratorer og elektrikere tilbyder den uovertruffen ydeevne, alsidighed og brugervenlig betjening.

Videoer

 

 

Funktioner

  • Fladt billede med høj kontrast
  • 5.200 lumen output over hele zoomområdet
  • Effektivt optisk system med integreret 15°- 45° zoomsystem
  • Konfigurerbar design til reduktion af ressourcer, omkostninger og vægt
  • Ét gobo- eller fire gobo-moduler
  • Animationsmodul
  • Manuelt framingmodul til præcis indramning af projiceret billede
  • 0-100% elektronisk dæmpning
  • Hibernationstilstand for meget lavt strømforbrug
  • Kompakt og slankt design
  • RDM og DMX-kontrol
  • Lokal diagnosticering og fokusering via magnetisk sensor
  • Dedikeret rum til installation af Power- og DMX In/Out-kabler
  • Valgfri PD Hybrid In/Out-kabellløsning til nem daisy-chain
  • Automatisk termisk styring for sikker drift ved høje og lave omgivelsestemperaturer
  • Fuldt vejrbestandig kabinet (IP66, IK08 og C-5 høj korrosionsvurdering)
  • Leveret i FSC-certificeret papkarton
  • 5 års garanti

Specifikationer

  • Physical Length: 342 mm (13.5 inch.) Width: 272 mm (10.7 inch.) Height: 335 mm (13.2 inch.) Weight: 12.5-13.9 kg (27.5–30.6 lbs)
    depending on actual configuration
    Weight depends on actual configuration
    Dynamic Effects Color wheel: 5 dichroic colors (red, green, blue, yellow, CTO) + open Zoom: Motorized, 15° - 45° beam angle Dimming: 0-100% electronic Shutter: Strobe and pulse effects, instant open and blackout Focus: Motorized, variable 3 m (9.8 ft.) to infinity Accessory 1-gobo module: indexing, variable rotation Accessory 4-gobo module: selection, indexing, variable rotation Accessory animation module: Continuous rotation with variable speed and direction (always in aperture) Accessory Framing module: 4 blades for manual adjustment of insert and angle (8 finger knobs with locking mechanism)
    Control and Programming User interface: Magnetic sensor to call up fixture status and focus fixture Stand-alone control: Up to 20 scenes with individual fade/ hold times Control options: DMX, RDM, stand-alone Configuration, addressing and status: Via RDM 8-bit control: Color and gobo selection 16-bit control: Gobo indexing and rotation, Animation, Focus, Zoom and Intensity DMX channels: 13/14 (Basic / Extended) DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
    Optics

    Light source: 130W White light LED engine
    LED lifetime: minimum 30,000 hours (to >70% luminous output)*
    Full Zoom Range: 15° - 45° (Field Angle)
    *Figure obtained under manufacturer's test conditions

    Photometric Data

    CRI (Color Rendering Index) : >70
    Color Temperature: 7,500 K
    Fixture Luminous Output: 5,200 lumens
    Light Engine Luminous Output: 13,000 lumens
    LED Refresh Rate: 2,400 Hz.
    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient

    Construction Housing:

    Cast aluminum

    Finish: Hard anodized Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass Ingress protection: IP66 Impact resistance: IK08 Corrosion resistance: C5 (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    EPA (Effective Projected Area): 0.1 m2 Color options: Traffic Grey RAL 7042, Traffic White RAL 9016, Traffic Black RAL 9017
    Service Lid for gobo change or insert of accessory effect modules
    Gobos Suitable material: Borosilicate glass, coatings heatresistant to 450°C (842° F) Gobo diameter: 19.0 mm +0/-0.3 mm (0.74 in. +0/-0.02 in.) Maximum image diameter: 15 mm (0.59 in.) Glass gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.) Glass gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.) Aluminum gobo thickness: 0.5 mm ± 0.02 mm (0.020 in. ± 001 in) HT paint
    Gobos and Color Frame
    Installation Mounting: Adjustable yoke Orientation: Any, except horizontal angles above 70° Minimum distance to illuminated surfaces: 0.5 m (20 in.)
    Connections Power cable entry: IP68 cable gland (accepts 8 mm-12 mm) Power connection: Terminal for power in separate compartment Data cable entry: Terminal for power in separate compartment Data connection: Terminal for data in separate compartment
  • Electrical

    AC power: 100-240/277 V nominal, 50/60 Hz
    Power supply: Auto-ranging electronic switch-mode
    Surge protection: 4 KV
    Max earth-leakage current: 0.4 mA
    Power factor: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
    Max current draw: 0.98 @ 110 V / 0.96 @ 230 V, 0.91 @ 277 V
    Typical current draw: 1.48 A @110 V, 0.71 A @230 V, 0.63 A @ 277 V *
    Power Consumption
    Maximum: 180 W
    Typical: 160 W *
    Idle: 10 W *
    Hibernation: 3 W *
    *Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Typical: full output, no effects moving, regulated fan speed.
    Idle: no output, no effects moving, regulated fan speed.
    Hibernation: no output, motors de-energized, fans stopped, wake-up procedure to re-use fixture.

    Thermal Cooling: Convection and forced air (temperature regulated) Maximum surface temperature: 60° C (140° F) Maximum ambient temperature (Ta max.): 45° C (113° F) * Minimum ambient temperature (Ta min.): -30° C (-22° F)**
    *Above this temperature, the fixture regulates output to protect from overheating.
    **For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F)
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard outer packaging Efficacy (max output): 32.9 lm/W LWR*: 416 lm/kg (189 lm/lbs.)
    *LWR = Lumen-to-Weight Ratio
    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032(Class B),EN55035, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: ANSI/UL 1598 US EMC: CFR 47 Part 15 Class B Canadian safety: CSA C22.2 No 250.13 Canadian EMC: CAN ICES (B)/ NMB(B) Australia/NZ: RCM Thailand: TISI 1955-2551 BIS certification: (Pending) Korea: KS C 9832, KS C 9835
    Included Items

    4 pcs Insulated ferrules crimp terminal connectors for Power
    4 pcs Insulated ferrules crimp terminal connectors for Data
    1 pcs desiccant sachet
    1 pcs Multi-Language Safety and Installation Manual

    Related Items Martin Companion Cable (for firmware update over DMX): P/N 91616091 Martin Companion Software: free download from www.martin.com
    Ordering Information - Fixtures Exterior Projection Pro Compact, Grey: MAR-90560250 Exterior Projection Pro Compact, White: MAR-90560251 Exterior Projection Pro Compact, Black: MAR-90560252
    Ordering Information - Accessory Modules Manual framing module: MAR-90560260 Animation Module: MAR-90560261 One gobo holder module: MAR-90560262 Four gobo wheel module: MAR-90560263
    Ordering Information - Accessories Hybrid PD cable tail In/Out 0.5 m, black: MAR-91700020 Hybrid PD cable tail In/Out 0.5 m, white: MAR-91700022 Junction Box Power DMX to PD: P/N MAR-91700019
    Ordering Information - Related Items Glareshield Black: MAR-90560264 Exterior Multitool: MAR-90590025 Attachment plate for safety wire: MAR-90590050 Gobo ring D19 EP Compact - Set of 10: MAR-90560270 Animation wheel w open hole - Set of 5: MAR-90560271

Downloads

Specifications
  Version Sprog Størrelse Uploadet
file type icon Exterior Projection Pro Compact - Spec Sheet
en version D, opdateret: jan 2026
en  2,07 MB jan 2026
en  103 kB maj 2025
Manuals
  Version Sprog Størrelse Uploadet
es  3,58 MB jul 2025
fr  4,57 MB jul 2025
en  3,39 MB jul 2025
de  3,63 MB jul 2025
Photometrics
  Version Sprog Størrelse Uploadet
en  5,1 MB apr 2025
Illustrations
  Version Sprog Størrelse Uploadet
en  717 kB mar 2025
en  2,79 MB mar 2025
file type icon Line it up Gobo Design - 2D dimensions (EPS_PNG)
en version A, opdateret: apr 2025
en  392 kB apr 2025
Symbols
  Version Sprog Størrelse Uploadet
file type icon AutoCAD 2D Symbols
en version 2.8, opdateret: jan 2026
2.8  en  4,42 MB jan 2026
file type icon AutoCAD 3D Symbols
en version 2.8, opdateret: jan 2026
2.8  en  18,7 MB jan 2026
file type icon Vectorworks Symbols
en version 4.6, opdateret: jan 2026
4.6  en  249 MB jan 2026
file type icon Martin Professional GDTF Library
en version A, opdateret: okt 2023
en  203 bytes okt 2023
CAD Drawings
  Version Sprog Størrelse Uploadet
file type icon Exterior Projection Pro Compact - 3DS
en version B, opdateret: okt 2025
en  19,6 MB okt 2025
file type icon Exterior Projection Pro Compact - 3D DWG
en version B, opdateret: okt 2025
en  17,5 MB okt 2025
BIM Objects
  Version Sprog Størrelse Uploadet
file type icon Exterior Projection Pro Compact - BIM Object
en version A, opdateret: aug 2025
en  aug 2025
Compliances
  Version Sprog Størrelse Uploadet
en  107 kB mar 2025
en  480 kB mar 2025
en  219 kB mar 2025
en  152 kB mar 2025
en  661 kB apr 2026
Firmware
  Version Størrelse Uploadet
download icon for Exterior Projection Pro Compact - Firmware Exterior Projection Pro Compact - Firmware
version 1.1.3, opdateret: jul 2026
1.1.3   jul 2026

Hvis nogle af linksene ovenfor resulterer i mærkelige tegn i din browser, skal du højreklikke på filen for at gemme den på din computer.

Nyheder

Support/FAQ

HARMAN Professional Solutions: