MAC 1200 A-Section EPROM v2.2

Last Updated: May 19, 2018

Version 2.2

  • Stops pan/tilt movement if lamp feed back is lost to prevent shattered glass from shaking out in case of lamp explosion.
  •  

 

Version 2.1

  • Martin RS-485 protocol version 2 compatible.

  • Correction regarding "oscillation" of pan in DMX mode 4 if speed channel > 2 and pan LSB channel > 0.

  • Improved pan/tilt bump on slight movements via DMX tracking.

  • Correction regarding lamp on. The fixture now accepts a DMX lamp on during reset. On previous versions, this would cause a "LErr".

  • Test sequence, "SP15", implemented. This sequence runs through all effects.

  • Support of "FEbA" on receiver module ver.1.2. This feature allows disabling of the pan/tilt feedback. This setting can not be stored. This feature is especially useful when servicing the fixture.

  • Correction regarding feedback, so that pan/tilt always corrects its position at maximum speed if forced from a static position (time off) set via the 3032 controller.


Version 2.0

  • First released version.

  • DMX512 protocol version 1 compatible.

  • Martin RS-485 protocol version 1 compatible.


Related Products