Last Updated: May 19, 2018
- Adds software setting for the MAC 500 SP. On SP models, toggle SPEC -> SPMd to ON. OFF, the default, is the setting for standard MAC 500s.
- Pan/tilt position correction routine adapted for drive trains with adjustable belt tension. Motor speed is reduced while correcting step loss. There is no change to normal performance.
- Pan/tilt feedback is disabled if the position is not corrected after 10 seconds.
We recommend updating all fixtures that have version 1.9. For fixtures without adjustable tilt and/or pan tension (before S/N 412031-0000), there is no change in performance from version 1.8.