Last Updated: May 19, 2018
Version 2.2
- Stops pan/tilt movement if lamp feed back is lost to prevent shattered glass from shaking out in case of lamp explosion.
Version 2.1
-
Martin RS-485 protocol version 2 compatible.
-
Correction regarding "oscillation" of pan in DMX mode 4 if speed channel > 2 and pan LSB channel > 0.
-
Improved pan/tilt bump on slight movements via DMX tracking.
-
Correction regarding lamp on. The fixture now accepts a DMX lamp on during reset. On previous versions, this would cause a "LErr".
-
Test sequence, "SP15", implemented. This sequence runs through all effects.
-
Support of "FEbA" on receiver module ver.1.2. This feature allows disabling of the pan/tilt feedback. This setting can not be stored. This feature is especially useful when servicing the fixture.
-
Correction regarding feedback, so that pan/tilt always corrects its position at maximum speed if forced from a static position (time off) set via the 3032 controller.
Version 2.0
-
First released version.
-
DMX512 protocol version 1 compatible.
-
Martin RS-485 protocol version 1 compatible.
download
