Last Updated: May 19
- Bootloader added.
- Upload procedure improved, before the fixture would often miss the upload.
- New reset that uses feedback functions to achieve better accuracy implemented.
- Strobe/Pulse performance improved.
- Blackout while moving improved.
- Color Blackout function added, uses color 6 as COLB.
- Prism in/out acceleration reduced to prevent head shaking after change.
- Pan/Tilt feedback turn-off improved.
- Prism and rotation gobo no longer indexes when stopped.
- Effect feedback now correct step-loss on the fly for color and rotation gobo.
- Motor lineraization
- MP2 interface implemented.
- Extra unused fan set to 30% PWM instead of 100% as before.
- When lamp enters explosion mode, all DMX communication is disabled. DMX will be re-enabled if the lamp becomes lit, by manual turn on.
- Lamp HOT time changed to 10 minutes.
- Writes message in display before programming the display. Message is DISP - PROG.
- Display programming time reduced.
- During HOT/LERR the dimmer will remain shut.
- Menu can now be entered during reset. MAN,TSEQ and UTIL menus are blocked during reset.
- Menu short-cuts added, LampOn, LampOff, Reset and P/T disable.
- Display now shows SRST during software reset.
- When display is inverted, the dots in version number are too.
- Service menu reworked.
- DMXL menu reworked to support both 16BT and 16EX DMX layout.
- EFSP (Effect speed) Menu Added.
- TSEQ facelift.
- UTIL/PCBT menu now works.
- UTIL menu animation now works like MAC550.
- Flashing cursor when entering the ADDR menu
- Automatic max address correction implemented in ADDR menu and PSET menu
- Fixture addr set to 1, using keys "UP" + "ENTER" in ADDR menu implemented
- All ON/OFF menu's requires ENTER key to change values
- All menu wrap-around implemented
- ..and a lot of other minor adjustments/improvments.
download
