P3-050/150/300 Recovery Wizard v5.0.0

Note: this is an old version. The current version is: P3-050/150/300 Recovery Wizard v5.2.0. ×

Last Updated: Jul 01, 2019

Version 5.0.0 2019-06-23


Recovers P3-050/150/300 System Controller to Software Version 5.0.0


  1. Power off P3-050/150/300 System Controller and remove lid
  2. Eject SD card (located underneath the bottom right of the raised DSP Board on P3-300, located at edge of mainboard on P3-050/150)
  3. Insert the SD card into a card reader connected to a computer
  4. If needed, re-format the SD card (FAT32)
  5. Download the ZIP file
  6. Extract following files from the ZIP file:
    • dsp_card.fpga
    • stingray_p3_150.fpga
    • reload_fw
    • rootfs.tar.gz
    • uImage
  7. Copy the five files above onto the SD card
  8. Re-insert the SD card into the DSP card (P3-300) or mainboard (P3-050/150)
  9. Close lid
  10. Power up system

Related Products