P3-050/150/300 Software v6.3.2

Last Updated: Dec 24

Version 6.3.2 2025-12-24
Changes since 6.3.0

Instructions

Download and unpack the software package.
Also download the latest corresponding Personality and Firmware Update Package and unpack it.
Place both on a USB memory device and plug that into the P3 System Controller.
On the P3 System Controller, close the open showfile (File -> Close).
On the P3 System Controller, go to Settings -> Device & Firmware Library -> User Library and delete any previously user-imported personality files from the Library at the bottom.
On the P3 System Controller, go to Settings -> Hardware Settings -> System -> Software -> Reload to start the update.
Once the update has completed, import the new Personality and Firmware Update Package via the Device & Firmware Library.

New Features & Improvements

Added function to run fixtures at their default Colour Temperature, not overridden by P3.
Increased maximum width of Alignment Bar Test Pattern.

Bug Fixes

Entering Number under Device Properties now leaves user enough time.
Layout Wizard now working on fixtures connected via P3 PowerPort 2000 or P3 PowerPort 500 IP.
Select All Fixtures of Same Type working again.
Fixed P3-050/150/300 crashing when opening Show File with too many DMX Universes patched.
Various minor fixes and improvements.

Known Issues

MVR Import/Export is disabled in 1:1 shows.
MVR Import may result in some fixtures being rotated 180 degree wrong in very specific cases.
P3-050/150/300 do not (yet) support MAC Aura Raven XIP in Ludicrous and Plaid DMX Mode.
P3-050/150/300 do not (yet) support splitting of fixtures across multiple DMX Universes.
P3-050/150/300 do not (yet) follow Highlight Colour selection for fixtures on the workspace.
Displaying testpattern on VDO Face 5 sometimes leaves a few pixels black (can be fixed by giving it another Number).
P3-050/150/175/275/300 will only access first partition on a multi-partition USB memory device.
P3-050/150/175/275/300 do not support USB memory device partitions larger than 32GB.

Unsupported Features

P3-050/150/300 do not output the P3 Visualizer Protocol to 3rd Party Visualizers (this feature is only available on P3-175/275/PC).

Warnings

Please update EC-10 and EC-20 panels to firmware 3.0.0, using a P3-175/275/PC running 3.1.1 or newer, BEFORE connecting them to a P3-050/150/300.
Please update P3 PowerPort 1500's to firmware 1.2.1 or newer, using a P3-175/275/PC running 3.1.1 or newer, BEFORE connecting them to a P3-050/150/300.

Latest Included Fixture Firmware Packages