MAC 350 Entour (discontinued)

Mac 350 entour large
Larger Images

The MAC 350 Entour is a cutting edge LED profile fixture with no peers. It surpasses what has previously been possible in terms of brightness, efficiency and compactness in a hard edge LED fixture. Featuring proprietary LED technology, it is the market’s first real alternative to traditional HID-based profile fixtures.

  • Highly efficient pure white LED source
  • Color wheel with 8 interchangeable dichroic colors - Split color effects and continuous rotation
  • Enhanced color spectrum and light quality maintenance

Features

  • Highly efficient pure white LED source
  • Color wheel with 8 interchangeable dichroic colors - Split color effects and continuous rotation
  • Enhanced color spectrum and light quality maintenance
  • Motorized iris
  • Built-in macro effects
  • 8000 lm output - Sufficient to replace 575 watt HID fixtures
  • Full electronic dimmer and strobe
  • Crisp and clean projection with no color artifacts
  • 25° field angle (1/10 Peak)
  • Motorized focus
  • Greater reliability, less maintenance
  • Quiet for noise sensitive applications
  • DMX, stand-alone, synchronized (master/slave)
  • Compact, low weight design
  • 6 rotating and indexable gobos
  • Increased energy efficiency
  • No lamp replacements necessary

 

Tech Specs

Physical Length: 377 mm (14.9 in.) including handles Width (Base): 220 mm (8.7 in.) Height: 454 mm (17.9 in.), head horizontal Height: 471 mm (18.6 in.), head straght up Weight: 16.6 kg (36.6 lbs.)
Dynamic Effects Shutter effect: Electronic, with regular and random pulse, burst and strobe effects Electronic dimming: 0 - 100%, choice of four dimming curves Color wheel: 8 interchangeable dichroic filters + open, full and split colors, music trig, continuous rotation, random color Rotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shake Iris: Motorized, with pulse and random effects Focus: 2 m (78.8 in.) to infinity Pan: 630° Tilt: 300° Adjustable pan/tilt and effects speed:
Control and Programming Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 14/17 Setting and addressing: Control panel with LED display Macro programs: 10 pan/tilt and 10 effects macros, all with staggered start/chase feature Macro selection: DMX or onboard control panel Movement control options: Tracking and vector Protocol: USITT DMX512/1990 Stand-alone memory: 100 scenes Stand-alone and master/slave programming: Control panel with LED display Transceiver: RS-485 Fixture software update: Serial upload via DMX link 16-bit control: Rotating gobo indexing, pan & tilt
Optics Light source: 7 x Luminus CBT-90 (50 W) LEDs Minimum LED lifetime: 60 000 hours (to >70% luminous output)* LED refresh rate: 610 Hz *Figure obtained under manufacturer´s test conditions:
Photometric Data Color temperature: 6500 K CRI (color rendering index): 70 Efficiency: 55%
Construction Color: Black Housing: UV-resistant fiber-reinforced composite and die-cast aluminum Protection rating: IP20
Gobos Outside diameter: 27.9 mm +0/- 0.3 mm (1.1 in. +/- 0.01 in.) Maximum image diameter: 23 mm (0.9 in.) Maximum thickness: 1.8 mm (0.07 in.) Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coating Recommended metal: Aluminum (steel for temporary use only)
Installation Mounting points: 2 pairs of 1/4-turn locks Orientation: Any Minimum distance to combustible materials: 200 mm Minimum distance to illuminated surfaces: 0.5 m
Connections AC power input: Neutrik PowerCon DMX data in/out: 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Main fuses: 10 AT (slow blow) x 2 Standby power: Max. 49 W (idle mode, dimmed to zero)
Typical Power and Current 100 V, 50 Hz: 418 W, 4.2 A, PF 0.996 100 V, 60 Hz: 417 W, 4.2 A, PF 0.996 110 V, 60 Hz: 439 W, 4.0 A, PF 0.996 120 V, 60 Hz: 463 W, 3.9 A, PF 0.996 208 V, 60 Hz: 405 W, 2.0 A, PF 0.971 230 V, 50 Hz: 443 W, 2.0 A, PF 0.971 240 V, 50 Hz: 452 W, 2.0 A, PF 0.962 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.:
Thermal Cooling: Forced air (temperature-regulated, low noise, user-definable levels) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, Ta=40° C: 70° C (158° F) Maximum surface temperature after 5 minutes of operation, Ta=40° C: 70° C (158° F) Total heat dissipation (calculated, +/- 10%): 1580 BTU/hr. Total heat dissipation at standby (calculated, +/- 10%): 170 BTU/hr.
Approvals EU safety: EN 60598-2-17, EN 62471 EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class A Canadian safety: CAN/CSA E60598-1, CAN/CSA E598-2-17 Canadian EMC: ICES-003 Class A Australia/NZ: C-TICK N4241
CE ETL C US Intertek C-Tick 
Included Items Two Omega clamp attachment brackets with 1/4-turn fasteners: 91602001 Two 10 AT main fuses (installed): P/N 05021029 User manual:
Accessories Power cable, 12 AWG, SJT, with Neutrik PowerCon NAC3FCA input connector, 3 m: P/N 11541503 Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 3-pin male XLR to 5-pin female XLR adaptor: P/N 11820004 5-pin male XLR to 3-pin female XLR adaptor: P/N 11820005 G-clamp: P/N 91602003 Quick trigger clamp: P/N 91602007 T-shaped omega bracket with quarter-turn fasteners: P/N 91602008 Omega bracket: P/N 91602001 Safety cable, safe working load 50 kg: P/N 91604003 Four-unit flightcase for 4 x MAC 350 Entour™: P/N 91510160 Half-coupler (tube) clamp: P/N 91602005 A wide range of filters and gobos for this product is available from Martin™:
Related Items Martin USB Duo™ DMX Interface Box: P/N 90703010 Martin RDM 5.5 Splitter™: P/N 90758150
Ordering Information MAC 350 Entour™, black, in cardboard box: P/N 90231400

Downloads

Filename Version Language Size Uploaded
Manuals
Download 17 MAC 350 Entour - Bedienungsanleitung de  1.02 MB Dec 12, 2011
Download 17 MAC 350 Entour - User Manual en  2.36 MB Jun 25, 2014
Download 17 MAC 350 Entour - Manuel d´utilisation fr  1.22 MB Sep 22, 2010
Service Notes
3DPartsfinder using Solid Works Composer player en    Mar 04, 2016
Illustrations
Download 17 2D Dimensions DXF en  2.4 MB Jul 15, 2010
Download 17 2D Dimensions en  314 KB Jul 15, 2010
3D Symbols
Download 17 MAC 350P 3D 0deg (REV-A) en  6.23 MB Dec 20, 2011
Download 17 MAC 350P 3D 90deg (DWG) en  4.26 MB Dec 20, 2011
Download 17 Vectorworks Symbols 2.5  en  110 MB Mar 27, 2018
Compliances
Download 17 MAC 350 / 401 - ETL Authorization to Mark en  449 KB Jun 02, 2015
Download 17 MAC 350 Entour - EU Declaration of Conformity en  333 KB Nov 02, 2010

Support/FAQs

MAC 350 Entour (discontinued)