RUSH FiberSource 1
متوقف

RUSH FiberSource 1
صور أكبر

تحديث متوقع بشدة لجهاز FiberSource QFX 150، جهاز RUSH FiberSource 1 الجديد هو أداة قوية لإضاءة كابلات الألياف البصرية في التثبيتات الدائمة. يتضمن جهاز عرض ألياف LED بقوة 78 واط جديد، ويوفر جهاز RUSH FiberSource 1 كفاءة وموثوقية محسنة مع الحفاظ على جميع الميزات الرئيسية لسابقه، بما في ذلك تسع ألوان قابلة للتبديل وعجلة مؤثرات وميض والتحكم الإلكتروني بالتعتيم والتحكم عبر DMX أو التشغيل المستقل.

  • جهاز عرض ألياف LED بقوة 78 واط
  • 9 ألوان قابلة للتبديل
  • التحكم الإلكتروني بالكثافة من 0 إلى 100%

الفيديوهات

 

 

الميزات

  • جهاز عرض ألياف ضوئية LED بقوة 78 وات
  • 9 ألوان قابلة للتبديل
  • تحكم إلكتروني في الشدة من 0 إلى 100%
  • عجلة تأثير وميض
  • تحكم DMX أو تحكم مستقل
  • حتى 300 كابل ألياف ضوئية (1 مم)

المواصفات

  • Physical Length: 305 mm (12.0 in.) Width: 210 mm (8.3 in.) Height: 200 mm (7.9 in.) Weight: 7.6 kg (16.8 lbs.)
    Dynamic Effects Color wheel: 9 interchangeable filters + open, indexing, continuous rotation Twinkle effect: Continuous rotation, variable speed and direction Dimming: 0 - 100% continuous dimming
    Control and Programming Control options: DMX, standalone, master/client DMX channels: 5 Standalone programming: DIP switch Settings and DMX addressing: DIP switch DMX compliance: USITT DMX512/1990
    Optics Light source: CREE 78 W LED Minimum LED lifetime: 35,000 hours (to >70% luminous output)* CRI (Color Rendering Index): >70 Color temperature: 6000–7000 K *Figure obtained under test conditions.
    Construction Housing: Steel and aluminum Color: Black (RAL 9005) Protection rating: IP20
    Installation Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 0.2 m (7.9 in.) Minimum clearance around fan and air vents: 0.1 m (4.0 in.)
    Connections AC power input/output: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
  • Electrical AC power: 100-240 V, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode
    Typical Power and Current 110 V, 60 Hz: 0.8 A, 87 W, PF 0.986 230 V, 50 Hz: 0.5 A, 86 W, PF 0.909 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Thermal Cooling: Forced air (regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 50° C (122° F)
    Approvals EU safety: EN 60598-2-1 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61547 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C22.2 No. 250.0 Australia/NZ: C-TICK N4241
    Included Items Power cable, 1.5 m (4.9 ft.), without mains plug:

    Color filter M05, blue 108L w. adaptor
    Color filter M05, yellow 603L w. adaptor
    Color filter M05, green 206L w. adaptor
    Color filter M05, red 308L w. adaptor

    Related Items Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com
    Accessories Power connectors:

    Power Connector PowerCON Male: P/N 91611795
    Power Connector PowerCON Female : P/N 91611794

    Cables, 16 A, for connection to power in chains:

    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
    Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
    Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176

    Cables, 16 A, for power input:

    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
    Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
    Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
    (H07RN-F are European approved cables, SJOOW are US approved cables)

    Filters:

    Color filter M05, green 202L w. adaptor: P/N 62327931
    Color filter M05, blue 111L w. adaptor: P/N 62327928
    Color filter M05, blue 101L w. adaptor: P/N 62327929
    Color filter M05, cyan 401L w. adaptor: P/N 62327930
    Color filter M05, yellow 604L w. adaptor: P/N 62327932
    Color filter M05, red 301L w. adaptor: P/N 62327933
    Color filter M05, pink 312L w. adaptor: P/N 62327934
    Color filter M05, purple 502L w. adaptor: P/N 62327936
    Color filter M05, green 204L w. adaptor: P/N 62327937
    Color filter M05, orange 306L w. adaptor: P/N 62327938

    Installation hardware:

    G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
    Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
    Half-coupler clamp: P/N 91602005
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
    Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

    Ordering Information RUSH FiberSource 1™ in cardboard box: P/N 90280070

التنزيلات

Manuals
  الإصدار اللغة الحجم تاريخ التحميل
file type icon RUSH FiberSource 1 - Manuel d'Utilisation
fr الإصدار A, تم التحديث: مايو 2018
fr  1.1 MB مايو 2018
file type icon RUSH FiberSource 1 - User Manual
en الإصدار A, تم التحديث: يوليو 2020
en  1.13 MB يوليو 2020
file type icon RUSH FiberSource 1 - Bedienungsanleitung
de الإصدار A, تم التحديث: يوليو 2020
de  1.46 MB يوليو 2020
Illustrations
  الإصدار اللغة الحجم تاريخ التحميل
file type icon RUSH FiberSource 1 - 2D (PDF)
en الإصدار A, تم التحديث: مايو 2018
en  657 KB مايو 2018
file type icon RUSH FiberSource 1 - 2D (DWG)
en الإصدار A, تم التحديث: مايو 2018
en  621 KB مايو 2018
Symbols
  الإصدار اللغة الحجم تاريخ التحميل
file type icon Vectorworks Symbols
en الإصدار 4.6, تم التحديث: يناير 2026
4.6  en  249 MB يناير 2026
Compliances
  الإصدار اللغة الحجم تاريخ التحميل
file type icon RUSH FiberSource 1 - ETL Listing Verification
en الإصدار A, تم التحديث: مايو 2018
en  387 KB مايو 2018
file type icon RUSH FiberSource 1 - EU Declaration of Conformity
en الإصدار A, تم التحديث: مايو 2018
en  45.1 KB مايو 2018
Service Notes
  الإصدار اللغة الحجم تاريخ التحميل
file type icon 3D Partsfinder - Opening using Solid Works Composer Player
الإصدار 4, تم التحديث: أكتوبر 2020
  743 KB أكتوبر 2020
Tech Notes
  الحجم تاريخ التحميل
file type icon Avoiding damage from sunlight and other light sources
تم التحديث: سبتمبر 2017
سبتمبر 2017
Hints and Tips
  الإصدار اللغة الحجم تاريخ التحميل
Avoiding damage from sunlight and other light sources
en الإصدار B, تم التحديث: مايو 2018
B   en    مايو 2018
Firmware
  الإصدار الحجم تاريخ التحميل
download icon for RUSH FiberSource 1 - Firmware RUSH FiberSource 1 - Firmware
الإصدار 1.1, تم التحديث: يوليو 2026
1.1   يوليو 2026

إذا أدت أي من الروابط أعلاه إلى أحرف غريبة في متصفحك، يرجى النقر بزر الماوس الأيمن على الملف لحفظه على جهاز الكمبيوتر الخاص بك.

الدعم/الأسئلة الشائعة