Martin RUSH MH 6 Wash CT

صور أكبر

The RUSH MH 6 Wash CT is designed for key lighting applications within the House of Worship, Performing Arts and Live Stage environments where color temperature control of white light is critical but also a compact and light weight design is desired for smaller applications

The RUSH MH 6 WASH CT is a bright single-lens LED moving head with fully premixed white color temperatures. With twelve 10W WW/CW (warm white and cold white) LEDs and a 10° to 60° motorized zoom, it offers full electronic dimming and variable strobe effects controlled via DMX.

Pre mixed white light ranging from 2,700K to 7,800K
10-60 Degree Zoom System
Compact and Lightweight Design

الميزات

2,700K to 7,800K Color Temp Range
Allows key lighting to be matched for multiple sources from Tungsten to Metal Halide
10-60 Degree Zoom System
Compact and lightweight design
Can be used as a Mid effect with a tight beam look to washing a stage for key lighting applications
Ideal for applications that have limited ceiling height or weight restrictions.

المواصفات

Physical Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)

Dynamic Effects Zoom: Motorized Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Pan: 540° Tilt: 200°

Control and Programming Control options: DMX 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display DMX channels: 14 DMX compliance: USITT DMX512/1990

Optics Zoom range: 10° - 60° Light source: 12 x 10W OSRAM OSTAR WW/CW LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output)* Binning: Tight color and flux binning *Figure obtained under manufacturer's test conditions.

Construction Housing: High-impact flame-retardant thermoplastic Color: Black Ingress protection rating: IP20

Installation Mounting points: One quarter‐turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to combustible materials: 100 mm (4 in.) Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum clearance around fan and air vents: 100 mm (4 in.)

Connections AC power in, thru: Neutrik PowerCon DMX data in, thru: 3-pin and 5-pin locking XLR
Electrical AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Typical half-cycle RMS inrush current: 11.3 A (at 240 VAC) Recommended Miniature Circuit Breaker: Type D*
*Per IEC 60898/UL489/CSA C22.2 No. 5
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

Typical Power and Current 120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Approvals EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM

Included Items
Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug
Omega bracket for rigging clamp attachment

Related Items Martin™ RDM 5.5 Splitter: P/N 90758150 Martin Companion Cable: P/N 91616091 Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com

Accessories Power connectors:
Power Connector PowerCON Male: P/N 91611795
Power Connector PowerCON Female : P/N 91611794
Cables, 16 A, for relaying power in chains:
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 1.2 m (3.9 ft.): P/N 91611798
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 1.2m (3.9 ft.): P/N 91610175
Power relay cable 3 x 2.5 mm2, H07RN-F POWCON-POWCON 2.5m (8.2 ft.): P/N 91611799
Power relay cable 3 x 14 AWG, SJOOW POWCON-POWCON 2.5m (8.2 ft.): P/N 91610176
Cables, 16 A, for power input:
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 1.5 m (4.9 ft.): P/N 91611800
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 1.5 m (4.9 ft.): P/N 91610177
Power input cable 3 x 2.5 mm2, H07RN-F OPEN-POWCON 5.0 m (16.4 ft.): P/N 91611801
Power input cable 3 x 14 AWG, SJOOW OPEN-POWCON 5.0 m (16.4 ft.): P/N 91610178
(H07RN-F are European approved cables, SJOOW are US approved cables)
Installation hardware:
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information RUSH MH 6 Wash™ CT in cardboard box: P/N 90280090

التنزيلات

Specifications

	اللغة	الحجم	تاريخ التحميل
RUSH MH 6 Wash CT Spec Sheet-English تم التحديث: يوليو 2018		1.44 MB	يوليو 2018

Manuals

	الإصدار	اللغة	الحجم	تاريخ التحميل
RUSH MH 6 Wash CT - Manuel d'utilisation الإصدار B, تم التحديث: مايو 2018	B		1.1 MB	مايو 2018
RUSH MH 6 Wash CT - User Manual الإصدار C, تم التحديث: مايو 2018	C		626 KB	مايو 2018
RUSH MH 6 Wash CT - Bedienungsanleitung الإصدار B, تم التحديث: مايو 2018	B		957 KB	مايو 2018

Photometrics

	الإصدار	اللغة	الحجم	تاريخ التحميل
RUSH MH 6 Wash CT - Photometric Files الإصدار A, تم التحديث: مارس 2024	A		265 KB	مارس 2024

Illustrations

	الإصدار	اللغة	الحجم	تاريخ التحميل
RUSH MH 6 Wash - 2D (PDF) الإصدار A, تم التحديث: مايو 2018	A		637 KB	مايو 2018
RUSH MH 6 Wash - 2D (DWG) الإصدار A, تم التحديث: مايو 2018	A		528 KB	مايو 2018

Symbols

	الإصدار	اللغة	الحجم	تاريخ التحميل
Vectorworks Symbols الإصدار 4.7, تم التحديث: أغسطس 2026	4.7		286 MB	أغسطس 2026

CAD Drawings

	الإصدار	اللغة	الحجم	تاريخ التحميل
Rush MH 6 Wash - 3D (DWG) الإصدار A, تم التحديث: مايو 2018	A		4.85 MB	مايو 2018

Compliances

	الإصدار	اللغة	الحجم	تاريخ التحميل
RUSH MH 6 Wash - ETL Listing Verification الإصدار A, تم التحديث: مايو 2018	A		381 KB	مايو 2018
RUSH MH 6 Wash - EU Declaration of Conformity الإصدار A, تم التحديث: مايو 2018	A		41.9 KB	مايو 2018

Service Notes

	الإصدار	اللغة	الحجم	تاريخ التحميل
3D Partsfinder - Opening using Solid Works Composer Player الإصدار 4, تم التحديث: أكتوبر 2020	4		743 KB	أكتوبر 2020

Tech Notes

	الحجم	تاريخ التحميل
Avoiding damage from sunlight and other light sources تم التحديث: سبتمبر 2017		سبتمبر 2017

Hints and Tips

	الإصدار	اللغة	الحجم	تاريخ التحميل
Avoiding damage from sunlight and other light sources الإصدار B, تم التحديث: مايو 2018	B			مايو 2018

Firmware

	الإصدار	الحجم	تاريخ التحميل
RUSH MH 6 Wash CT - Firmware الإصدار 2.0, تم التحديث: يوليو 2026	2.0		يوليو 2026