Exterior 430 Blue (discontinued)

Larger Images

Great for applications requiring just one color, the Exterior 430™ Blue. The Exterior 430 also uses a unique color calibration system in its Blue units to ensure uniformity across fixtures and over time, plus the added ability to adjust colors to precisely match the look needed in your lighting design. Color fades within a narrow range, such as magenta – blue – turquoise, are also possible.

 

  • Extremely bright one color fixture (Blue)
  • Very high efficacy
  • Adjustable colors around the prime color

Videos

Exterior 400 Range

 

Features

  • Extremely bright single color (up to 7000 lm)
  • Calibrated Blue ensuring color consistency
  • Adjustable color within Blue color ranges
  • Very low power consumption (max 139 W)
  • Choice of beam angles - 7.5°, 16°, 33°, 52°
  • Internal power and control
  • Super rugged IP65 housing
  • Choice of white, black or aluminum housing
  • 0 – 100% intensity control

Specifications

PhysicalLength: 169 mm (6.8 in.) including cable glandWidth: 307 mm (12.1 in.)Height: 401 mm (16.8 in.)Weight: 7.6 kg (16.8 lbs.) including bracket
Dynamic EffectsDimming: 0 - 100% continuousColor fine-tuning: Continuously variable
Control and ProgrammingControl options: DMX, stand-alone, synchronized (master/slave)DMX channels: 1 or 3 depending on modeDMX address setting: PC with Martin MUM™ software and DABS1™ hardware interfaceStand-alone trigger options: Internal timer and/or ambient light levelStand-alone and master/slave programming: PC with Martin MUM™ software and DABS1™ hardware interface26-bit control (internal): Single color intensityProtocol: USITT DMX512-AReceiver: RS-485Firmware update: Serial upload via DMX link
OpticsLight source: Cree XP-E high power emittersMinimum LED lifetime: 50 000 hours (to >70% luminous output)*Very Narrow (no diffuser), Narrow, Medium and Wide beam angles available*Figure obtained under manufacturer's test conditions
ConstructionColor: Clear anodized, black or whiteHousing: Anodized aluminumMounting bracket: 8 mm (0.32 in.) anodized aluminumFront glass: 6 mm (0.24 in.) anti-reflection coatedProtection rating: IP65
InstallationOrientation: AnyMounting: Flat surface at any angle, pedestal or other suitable supportVertical aiming: 330°Minimum distance to illuminated surfaces: 0.1 m (0.33 ft.)
ConnectionsPower cable entry: IP68 cable glandPower connection: 1.8 m (5.9 ft.) cable tailData cable entry: IP68 cable glandData connection: 1.8 m (5.9 ft.) combined input + output cable tail
ElectricalAC power: 100-240 V nominal, 50/60 HzStandby power: 13 WPower supply unit: Integrated, auto-sensing multi-voltageMain fuse: 2.5 AT (slow blow)
Typical Power and Current100 V, 50 Hz: 139 W, 1.4 A, PF 0.990100 V, 60 Hz: 139 W, 1.4 A, PF 0.989110 V, 60 Hz: 137 W, 1.3 A, PF 0.988120 V, 60 Hz: 136 W, 1.2 A, PF 0.986208 V, 60 Hz: 133 W, 0.7 A, PF 0.932230 V, 50 Hz: 132 W, 0.7 A, PF 0.925240 V, 50 Hz: 131 W, 0.7 A, PF 0.886Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (33° F)Maximum surface temperature, steady state, at 40° C ambient:90° C (194° F)Total heat dissipation (calculated, +/- 10%): 480 BTU/hr.
ApprovalsEU safety: EN 60598-2-5 (EN 60598-1), IEC/EN 60825-1EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3US safety (US model): UL 1598Canadian safety (US model): CAN/CSA C.22.2 No. 250
 
Included ItemsAdjustable mounting yokeNarrow, Medium and Wide diffusersHard-wired 1.8 m (5.9 ft.) power and data in/out cable tails without connectorsUser manual
AccessoriesDiffuser, Exterior 400 Series, Narrow: P/N 41600122Diffuser, Exterior 400 Series, Medium: P/N 41600123Diffuser, Exterior 400 Series, Wide: P/N 41600124Diffuser, Exterior 400 Series, Narrow, Directional 15°x1°: P/N 41600156Diffuser, Exterior 400 Series, Medium, Directional 30°x3°: P/N 41600157Diffuser, Exterior 400 Series, Wide, Directional 60°x1°: P/N 41600158Diffuser, Exterior 400 Series, Wide, Directional 60°x10°: P/N 41600159Exterior 200 floor stand: P/N 91611305Safety eyebolt: P/N 916112393-pin male XLR connector, cable-type, IP65: P/N 916113063-pin female XLR connector, cable-type, IP65: P/N 91611307
Related ItemsMartin DABS1™ USB interface box incl. cables: P/N 90758090
Spare Parts2.5 AT main fuse: P/N 05020010
Ordering InformationExterior 430 Blue, EU Model, Aluminum: P/N 90545055

Downloads

  Version Language Size Uploaded
Specifications
Exterior 430 Blue Spec Sheet-English   en  588 KB Jul 09, 2018
Manuals
Exterior 400 Range - Manuel d´utilisation fr  1.26 MB May 11, 2018
Exterior 400 Range - Bedienungsanleitung de  1.14 MB May 11, 2018
Exterior 400 range - User Manual en  2.01 MB May 11, 2018
Illustrations
EXT400 Range Dimensions (DXF) en  289 KB May 11, 2018
EXT400 Range 3D Symbol en  1.44 MB May 11, 2018
EXT400 Range Dimensions (PDF) en  165 KB May 11, 2018
3D Symbols
Vectorworks Symbols 2.7  en  251 MB Oct 08, 2019
Compliances
Exterior 200 LED / 400 Range - ETL Authorization To Mark en  105 KB May 11, 2018
Exterior 400 Range - EU Declaration of Conformity en  43.1 KB May 11, 2018
Software
Exterior 400 Series Main CPU 1.4.0    38.5 KB Jan 18, 2018
Martin USB Tools 1.2    107 MB Jun 14, 2018
Service Procedures
Exterior 400 series Maintenance Schedule en  217 KB May 11, 2018
Service Notes
3D Partsfinder - Opening using Solid Works Composer Player   814 KB Oct 01, 2019

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Support/FAQs