Exterior Linear Pro Cove QUAD

Outdoor Linear Cove Fixture with Color Boosting Technology and Dedicated Color Temperature Channel

Exterior Linear Pro Cove QUAD
Larger Images

Martin Exterior Linear Pro Cove QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with color boost technology and discreet yet robust housings. They offer uniform light distribution with a 100 degree beam angle that’s perfect for striking indirect lighting of ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels, or other permanent indoor or outdoor installations.

These lights feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.

Packed with intelligent features, Cove QUAD models offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.

With a high focus on sustainability, Cove QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy, and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

  • EASE OF INSTALLATION

    The slim design and low weight makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

  • SMART INFRASTRUCTURE

    Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

  • SOPHISTICATED COLOR CONTROL

    These QUAD color fixtures include logic RGB control of the RGBW engine, making it easier to mix colors when the white color is automatically calculated. Factory calibration of colors offers superior consistency and user-selectable default color temperature with the ability to set a favorite default color temperature. Fine segment control is also included for more organic and subtle color transitions.

  • PREMIXED COLORS WITH COLOR BOOST

    QUAD color LEDs deliver an enhanced visual appearance with homogenous color mixing and high lumen output of mixed colors. A color boosting feature is also included for full powered illumination of a single color or mixed colors, making them up to three times brighter than comparable fixtures yet boasting lower total power consumption.

  • EFFICIENT OPERATION

    With more than 50 lm/W, Exterior Linear Pro QUAD fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

  • GRANULAR LIGHTING CONTROL

    An integrated 6-inch (15 cm) segment mode enables more granular lighting control for organic and subtle looks.

featured content

EASE OF INSTALLATION

The slim design and low weight makes them easier to integrate into architectural elements discreetly and with less structural requirements. They have flexible change-of-beam angles for late design changes and on-site adjustments. A smart mounting plate design offers a variety of standard or custom bracket solutions.

featured content

SMART INFRASTRUCTURE

Fixtures are DMX-controllable and easy to install due to their integrated universal power supply. They can also be daisy-chained using a combined power and data connector, which enables long fixture runs and more simple infrastructures.

featured content

SOPHISTICATED COLOR CONTROL

These QUAD color fixtures include logic RGB control of the RGBW engine, making it easier to mix colors when the white color is automatically calculated. Factory calibration of colors offers superior consistency and user-selectable default color temperature with the ability to set a favorite default color temperature. Fine segment control is also included for more organic and subtle color transitions.

featured content

PREMIXED COLORS WITH COLOR BOOST

QUAD color LEDs deliver an enhanced visual appearance with homogenous color mixing and high lumen output of mixed colors. A color boosting feature is also included for full powered illumination of a single color or mixed colors, making them up to three times brighter than comparable fixtures yet boasting lower total power consumption.

featured content

EFFICIENT OPERATION

With more than 50 lm/W, Exterior Linear Pro QUAD fixtures are highly efficient. Multiple power modes (12W/10W/5W, including ASHRAE compliance) can be set via Remote Device Management (RDM) to reduce power consumption as needed.

featured content

GRANULAR LIGHTING CONTROL

An integrated 6-inch (15 cm) segment mode enables more granular lighting control for organic and subtle looks.

Videos

 

 

Features

  • Color-calibrated QUAD color LEDs (8 LEDs/ft)
  • Homogenous color mixing
  • 100° beam angle for indirect lighting applications
  • Dedicated color temperature control channel (1000K - 12000K)
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width

Specifications

  • Physical Width: 40 mm (1.57 inch.) Height: 68 mm (2.67 inch) Length - 1 ft Version: 312mm (1.02 ft) Length - 4 ft Version: 1227mm (4.02 ft) Weight - 1 ft Version: 0.85 kg (1.9 lbs) Weight - 4 ft Version: 2.8 kg (6.2 lbs)
    Dynamic Effects Color mixing: RGB (white is calculated automatically) Color temperature control: 1000K – 12000K in 50K steps Intensity: 0 - 100% Segment Control: 0.5ft, 1 ft or full 4 ft fixture control
    Control and Programming Control systems: DMX, RDM Control resolution: 8-bit DMX individual color control User interface: Magnetic button to call up fixture status and test fixture Stand-alone control: Up to 20 scenes with individual fade/hold times DMX compliance: USITT DMX512/1990 RDM compliance: ANSI/ESTA E1.20 Dimmer Resolution: 16-bit DMX control of intensity DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg) DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)
    Optics Light source: QUAD color LED (8 LEDs per foot) Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle: 100° Binning: Tight color and flux binning Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
    *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : >70 CCT: 1000K – 12000K (default 4000K) Luminous output:
     1 ft at 12W4 ft at 12W
    FULL:600 lumens2400 lumens
    RED:260 lumens1040 lumens
    GREEN:500 lumens2000 lumens
    BLUE:115 lumens460 lumens

    * All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

    Construction Housing: Aluminum Finish: Clear anodized (standard) or optional colors on request Front: Clear polycarbonate Protection rating: IP66 IK rating: IK08 Effective Projected Area (EPA): 0.04 m2 per ft Corrosion resistance: C5 High (ISO 12944-6) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)
    Installation Orientation: Any Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.
  • Electrical AC power: 100-277 V nominal, 50/60 Hz Typical half-cycle RMS inrush current: 0.35 A Power supply unit: Auto-ranging electronic switch-mode Surge protection: 4KV Power/data in/thru: 8-pin custom connectors Idle power consumption: 1ft length :1.54 W, 4ft length: 2.30W (steady state, all LEDs at zero intensity) Max earth leakage: 1ft length: 0.15 mA, 4ft length: 0.21 mA Maximum connected 4ft fixtures*: 42 pcs (52 m /169 ft) @ 230V-277V Maximum total string length (cable + fixtures)*: 150 m / 328 ft
    * Refer to system diagram for details on fixture run limitations
    Typical Power and Current 12W mode:
    100-240 V, 50/60 Hz: 12 W per foot +/- 1 W, PF 0.95 +/- 0.05
    277 V, 50/60 Hz: 12 W per foot +/- 1 W, PF 0.90 +/- 0.05

    10W mode:
    100-240 V, 50/60 Hz: 10 W per foot +/- 1 W, PF 0.95 +/- 0.05
    277 V, 50/60 Hz: 10 W per foot +/- 1 W, PF 0.90 +/- 0.05

    5W mode:
    100-240 V, 50/60 Hz: 5 W per foot +/- 0.5W, PF 0.90 +/- 0.05
    277 V, 50/60 Hz: 5 W per foot +/- 0.5W, PF 0.70 +/- 0.05
    Power figures are typical, not maximum. Measurements made at nominal voltage. Allow for +/- 10% deviation. PF = Power factor.
    Thermal Cooling: Convection Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot Maximum ambient temperature: 45° C (113° F)* Minimum ambient temperature: -30° C (-22° F)
    *Above this temperature, the fixture regulates output to protect from overheating
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant FSC: Certified cardboard inlay and outer packaging
    Approvals Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1) EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class B Canadian safety: CSA C22.2 No. 250.0 Australia/NZ: RCM India: BIS IS 10322(Part5/section5)
    Related Items Martin Companion Cable: P/N MAR-91616091 Martin Companion Cable (for firmware update over DMX): Free download from www.martin.com
    Accessories Glare shield, EL Pro 1ft set of 4: P/N MAR-90570022 Glare shield, EL Pro, 4ft set of 4: P/N MAR-90570023 Adjustable bracket EL Pro 10 pcs: P/N MAR-90570025 Flange bracket EL Pro 10 pcs: P/N MAR-90570026 Quick mount bracket EL Pro 10 pcs: P/N MAR-90570027 Junction Box Power DMX to PD: P/N MAR-91700019 Power DMX Cable PD PD 0.2M EU: P/N MAR-91700004 Power DMX Cable PD PD 1M EU: P/N MAR-91700005 Power DMX Cable PD PD 2.5M EU: P/N MAR-91700006 Power DMX Cable PD PD 5M EU: P/N MAR-91700007 Power DMX Cable PD PD 10M EU: P/N MAR-91700008 Power DMX Cable 100M Roll EU: P/N MAR-91700009 Power DMX Cable PD PD 0.2M US: P/N MAR-91700010 Power DMX Cable PD PD 1M US: P/N MAR-91700011 Power DMX Cable PD PD 2.5M US: P/N MAR-91700012 Power DMX Cable PD PD 5M US: P/N MAR-91700013 Power DMX Cable PD PD 10M US: P/N MAR-91700014 End termination cap PD: P/N MAR-91700015 Power DMX Cable 100M Roll US: P/N MAR-91700016 Field installable connector PD female: P/N MAR-91700017 Field installable connector PD male: P/N MAR-91700018
    Ordering Information Exterior Linear Pro cove QUAD 1ft: P/N MAR-90570001 Exterior Linear Pro cove QUAD 4ft: P/N MAR-90570004

Downloads

  Version Language Size Uploaded
Specifications
file type icon Exterior Linear Pro System Diagram
en version A, updated: Oct 18
en  1.01 MB Oct 18
file type icon Exterior Linear Pro Cove QUAD Spec Sheet
en version A, updated: Oct 18
en  489 KB Oct 18
Photometrics
file type icon Exterior Linear Pro Cove QUAD Photometrics
en version A, updated: Oct 14
en  101 KB Oct 14
Illustrations
file type icon Junction Box - 2D dimensions (DWG)
en version A, updated: Oct 28
en  1.2 MB Oct 28
file type icon Junction Box - 2D dimensions (PDF)
en version A, updated: Oct 28
en  238 KB Oct 28
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (DWG)
en version A, updated: Oct 13
en  4.91 MB Oct 13
file type icon Exterior Linear Pro Graze-Cove - 2D Dimensions (PDF)
en version A, updated: Oct 14
en  1.04 MB Oct 14
Symbols
file type icon AutoCAD 3D Symbols
en version 1.7, updated: Nov 24
1.7  en  11.8 MB Nov 24
file type icon AutoCAD 2D Symbols
en version 1.7, updated: Nov 24
1.7  en  2.9 MB Nov 24
file type icon Vectorworks Symbols
en version 3.4, updated: Nov 24
3.4  en  288 MB Nov 24
file type icon Martin Professional GDTF Library
en version A, updated: Jul 22
en  203 Bytes Jul 22
CAD Drawings
file type icon Junction Box - 3DS
en version A, updated: Oct 28
en  6.01 MB Oct 28
file type icon Junction Box - 3D DWG
en version A, updated: Oct 28
en  4.18 MB Oct 28
file type icon Exterior Linear Pro Graze-Cove - 3DS
en version A, updated: Oct 13
en  2.85 MB Oct 13
file type icon Exterior Linear Pro Graze-Cove - 3D DWG
en version A, updated: Oct 13
en  8.07 MB Oct 13

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

News

Support/FAQs


HARMAN Professional Solutions:

Exterior Linear Pro Cove QUAD

Outdoor Linear Cove Fixture with Color Boosting Technology and Dedicated Color Temperature Channel


5 Year Warranty  Martin Warranty - IP66  Martin Warranty - C5  Martin Warranty - 4KV  Martin Warranty - IK08