This compact beam moving head for smaller venues blasts an intense and narrow beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer and strobe, 6-facet prism and focus.
- Powerful beam moving head
- Sharp, narrow long-throw beam
- Powerful mid-air effects
- Fixed gobo wheel
- Color wheel
- Mechanical dimming and strobe
- 6-facet prism
- Motorized focus
- 3 & 5 pin XLR
PhysicalLength: 319 mm (12.6 in.)Width: 255 mm (10.1 in.)Height: 481 mm (19.0 in.)Weight: 14 kg (30.9 lbs.)
Dynamic EffectsColor wheel: 14 colors plus open, continuous and stepped scrolling, rotation with variable direction and speedStatic gobo wheel: 17 gobos plus open, continuous and stepped scrolling, rotation with variable direction and speedShutter: Strobe effect, pulse effects, instant open and blackoutPrism: 6-facet, indexing and rotation with variable direction and speedFocus: MotorizedDimmer: 0 - 100% continuous dimmingPan: 540°Tilt: 270°
Control and ProgrammingControl system: DMXDMX channels: 13Setting and addressing: Control panel with LCD displayDMX compliance: USITT DMX512/199016-bit control: Dimming, pan and tiltPan and tilt speed: Adjustable via onboard control panel and DMXPosition correction system: Available for pan and tilt
LampOsram HRI 132 W lamp modelsApproved lamp: Osram Sirius HRI 132 WColor temperature: 8800 KCRI (Color rendering index): 62Average lifetime: 6000 hours**Manufacturer's figure
OpticsBeam angle: 3°
ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticProtection rating: IP20
InstallationMinimum distance to illuminated surfaces: 6.5 m (21 ft. 4 in.)Mounting points: Two quarter-turn brackets for rigging clampsLocation: Indoor use only, must be fastened to surface or structureOrientation: Any
ConnectionsAC power input: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V nominal, 50/60 HzTypical total power consumption: 234 WPower consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current110 V, 60 Hz: 2.2 A, 234 W, PF 0.996230 V, 50 Hz: 1.1 A, 231 W, PF 0.996Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%): 800 BTU/hr.
ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547Canadian EMC: ICES-003 Class AAustralia/NZ: C-TICK N4241US EMC: 47 CFR Part 15 Class AUS safety: UL 1573Canadian safety: CSA C22.2 No. 166
Included ItemsPower cable, 1.5 m, without mains plugTwo Omega clamp attachment brackets with 1/4-turn fasteners
AccessoriesCables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9 ft. 11 in.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 1.4 m (4 ft. 8 in.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 2.25 m (7 ft. 5 in.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3.25 m (10 ft. 8 in.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805Installation hardwareHalf-coupler clamp: P/N 91602005G-clamp (suspension with yoke vertically downwards only): P/N 91602003Quick-trigger clamp (suspension with yoke vertically downwards only): P/N 91602007
Related ItemsRUSH™ Software Uploader 1: P/N 91611399
Ordering InformationRUSH MH 4 Beam™ in cardboard box: P/N 90280030
If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.