Larger Images

The Martin ELP PAR IP static LED fixture sets a new standard in the static wash category, with unprecedented lumen output, high-intensity narrow zoom, full-gamut color calibration and smart rigging and control features. This fixture is ideal for indoor or outdoor applications with an IP65 rating for protection against dust and water ingress.

The ELP PAR IP makes installation faster and easier, thanks to a quick-focus system and bright angle of projection indicators. Other performance enhancements include a wide zoom range that supports both stage illumination and tight mid-air beam effects, an advanced color-calibration system that delivers accurate color reproduction and precise color temperature control, an extended color mode and a CTC channel that can modify the color space.

Whether lighting an outdoor or indoor theatre production, festival, exhibition or corporate event, fill the stage with color and create stunning beam effects with this versatile LED fixture that sets a new performance benchmark in its class.





  • Light engine: 7 x 40W RGBW
  • Full-gamut color-calibration system
  • CTC control: 1,800–12,850 K
  • Quick Focus mode allows installation and focusing without the need for a console operator
  • Clear of projection indicators allow quick installation
  • Angled power and data connections support a clean cable run that does not impede the fixture or installation
  • Included truss and floor-mounting yoke with omega bracket connectivity
  • Lumen output: 3,350
  • Zoom: 5.5–50˚
  • Intensity: 329,058 cd
  • IP65 rating
  • Dimensions: 315 x 285 x 498 mm (12.4 x 11.3 x 15.7 in) (inc. bracket)
  • Weight: 9.1 kg (20 lbs)


  • Physical Length: 315 mm (12.4 in.) Width: 285 mm (11.3 in.) Height: 398 mm (15.7 in.) with bracket Weight: 9.1 kg (20.1 lbs.)
    Dynamic Effects Color mixing: RGBW Color presets: 48 color presets, virtual color wheel effects Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout Zoom: Motorized Color temperature: Variable 1800 – 12 850 K
    Control and Programming Control options: DMX, RDM DMX channels: 14 16-bit fine control: Dimming, RGB, Zoom LED color management modes: Raw, extended and calibrated DMX address setting: Control panel with OLED display DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20
    Optics Light source: 7 x 40 W RGBW Osram LEDs Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Beam angle (half-peak): 4.4 – 33.3° Field angle (one-tenth peak): 5.5 – 50.0° Binning: Tight color and flux binning Calibration: Full Gamut and Color Calibration Maximum output: 3350 lumens
    *Figure obtained under manufacturer´s test conditions
    Photometric Data Wide beam: 3350 lumens Narrow beam: 1626 lumens Fixture Center Intensity Narrow Beam: 329058 cd Fixture Center Intensity Wide beam: 10141 cd CRI (Color Rendering Index) : >70 CQS (Color Quality Scale): 84 TM-30 Rf (IES TM-30-15 Fidelity Index): 79 TM-30 Rg (IES TM-30-15 Gamut Index): 116 TLCI (Television Lighting Consistency Index): 61 CCT: 6500 Kelvin LED refresh rate - Standard Mode: 3600 Hz LED refresh rate - Theatre Mode: 19200 Hz
    *All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient
    Construction Housing: Aluminum and composite Filter mount: 191 x 191 mm (7.5 x 7.5 in.) Color: Black Ingress protection rating: IP65
    Installation Mounting points: Adjustable bracket, surface or truss mount (fits Martin Omega Bracket) Location: Wet locations, temporary outdoor use, not for household use Orientation: Any Minimum distance to combustible materials: 0.5 m (1.7 ft.) Minimum distance to illuminated surfaces: 1 m (3.3 ft.) Minimum clearance around fan and air vents: 0.5 m (1.7 ft.)
    Connections AC power in, thru: Neutrik PowerCON TRUE1 TOP DMX data in, thru: Neutrik IP-rated 5-pin locking XLR
  • Electrical AC power: 100-240 V nominal, 50/60 Hz Typical power consumption: 300 W Power supply unit: Auto-ranging electronic switch mode Maximum half-cycle RMS inrush current: 11.2 A
    Maximum Power and Current 100-120 V, 60 Hz : 3.7 A, 330 W, Power factor 0.99 220-240 V, 50 Hz: 1.7 A, 330 W, Power factor 0.94
    *Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Maximum surface temperature: 71° C (160° F) Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): -10°C (14° F) Total heat dissipation*: 1126 BTU/hr.
    *Calculated, +/- 10%, at full intensity, full white
    Acoustic Data Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 40.9 dB(A) Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 37.9 dB(A)
    Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 14.3 lm/W LWR*: 385 lm/kg (174 lm/lb)

    LWR = Lumen-to-Weight Ratio

    Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-003 Class B, ICES-005 Class B Australia/NZ: RCM United Kingdom: UKCA INCLUDED ITEMS Adjustable mounting bracket ACCESSORIES Power input cables, 16 A Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.): P/N 91611797 Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W TOP (female), 1.5 m (4.9 ft.): P/N 91610173 Power relay cables, 16 A, for relaying power to fixtures in chains Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91611796 Power Relay Cable, SJOOW, 12 AWG, TRUE1 to TRUE1, 2.5 m (8.2 ft.): P/N 91610172 Power connectors Cable Connector, Neutrik powerCON TRUE1 NAC3FX-W TOP (female): P/N 91611789HU Cable Connector, Neutrik powerCON TRUE1 NAC3MX-W TOP (male): P/N 91611788HU Installation hardware Martin Omega bracket for rigging clamp attachment: P/N 91602001 Half-coupler clamp: P/N 91602005 G-clamp (suspension vertically downwards only): P/N 91602003 Quick-trigger clamp (suspension vertically downwards only): P/N 91602007 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006 Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007
    Related Items Martin Companion Software Suite (including firmware uploader): Free download from www.martin.com Martin Companion Cable USB/DMX hardware interface: P/N 91616091
    Ordering Information ELP PAR IP in cardboard box: P/N MAR-90800010 ELP PAR IP - White in cardboard box: P/N MAR-90800015


  Version Language Size Uploaded
file type icon ELP PAR IP Spec Sheet
en updated: Nov 17
  en  350 KB Nov 17
file type icon ELP PAR IP Acoustic Test Report
updated: Nov 16
    382 KB Nov 16
file type icon ELP PAR IP User Guide
en version B, updated: Mar 13
en  1.08 MB Mar 13
file type icon ELP PAR IP User Guide
fr version A, updated: Nov 18
fr  4.08 MB Nov 18
file type icon ELP PAR IP User Guide
de version A, updated: Mar 13
de  635 KB Mar 13
file type icon ELP PAR IP Photometric FIles
updated: Nov 16
    3.61 MB Nov 16
file type icon ELP PAR IP Dimensions (PDF)
updated: Nov 16
    303 KB Nov 16
file type icon ELP PAR IP Dimensions (DWG)
updated: Nov 16
    2.41 MB Nov 16
file type icon Vectorworks Symbols
en version 3.5, updated: Feb 27
3.5  en  288 MB Feb 27
file type icon AutoCAD 3D Symbols
en version 1.8, updated: Feb 17
1.8  en  12.4 MB Feb 17
file type icon AutoCAD 2D Symbols
en version 1.8, updated: Feb 17
1.8  en  3.32 MB Feb 17
file type icon Martin Professional GDTF Library
en version A, updated: Jul 22
en  203 Bytes Jul 22
CAD Drawings
file type icon ELP PAR IP CAD Drawings
updated: Nov 16
    21.7 MB Nov 16
file type icon ELP PAR IP Declaration of Conformity UKCA
en updated: Nov 16
  en  275 KB Nov 16
file type icon ELP PAR IP Verification Letter
en updated: Nov 16
  en  416 KB Nov 16
file type icon ELP PAR IP Declaration of Conformity
fr updated: Nov 16
  fr  257 KB Nov 16
file type icon ELP PAR IP Declaration of Conformity
en updated: Nov 16
  en  257 KB Nov 16
platform icon ELP PAR IP - Firmware
version 1.1.0, updated: Mar 20
1.1.0     Mar 20

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.



HARMAN Professional Solutions: