Martin ELP CL IP

Større billeder

Martin ELP LED ellipsoidal fixtures deliver the luminance, brightness and vivid color rendering that have been synonymous with the Martin name for more than 30 years. Martin ELP CL IP offers the same rich saturated colors and class leading output as the original Martin ELP CL but expands its versatility into temporary outdoor applications through IP65 compliance for moisture resistance and complete dust protection, along with C3 corrosion resistance. ELP’s ergonomic Danish engineering offers advances in lighting functionality that include the highly efficient gear-based Fine Focus—an industry first; and Fast Focus which allows focusing of the fixture without data flowing to it. ELP also offers 16-bit dimming with 4 selectable curves and 26 color presets that match industry-standard color filters. ELP CL IP is available in black and white housing options and can be configured with one of four Martin static lens tubes in 19, 26, 36 and 50-degree beam angles, or a choice of two Martin Zoom lenses with choice of 15–30-degree and 25–50-degree range. ELP also offers flexibility in lighting design and inventory management through compatibility with third-party lens tubes along with a wide range of accessories including gel frames and gobos. Superior output, optics and color rendering, combined with robust protection from the elements, unparalleled ease-of-use and convenience, make Martin ELP the leading LED ellipsoidal fixture in its class.

Martin recommends using official Martin-branded ELP accessories for the highest possible performance. While we strive to ensure compatibility with third-party accessories, we cannot guarantee optimal performance and recommend that the user makes an evaluation of such an accessory before purchasing.

Avanceret Martin-optik møder banebrydende LED-teknologi
ELP'en er designet til at maksimere effektiviteten og levere et planflat lysfelt for mere jævn blanding og miksning mellem armaturerne. Halation-farvekorrektion fjerner atypiske blå og brune halos ved brug af Martin-linserør.

ELP CL IP-armaturet tilbyder imponerende 6.900 lumen og en CRI på 85 i High Output-tilstand, og 5.900 lumen og 90 CRI i High Quality-tilstand, med en farvetemperatur på 6.000K (åbent hvidt), og leverer flimmerfri drift for konsistent lysudgang på og uden for kamera.
Klassisk stil med fokus på funktionalitet
ELP CL IP bringer en klassisk lysfastgørelse til nye ydelsesniveauer med en række innovative funktioner. Vores tandhjul-baserede Fine Focus-justering – en branchepremiere – lader dig låse fokus præcist, hvor du ønsker det, øjeblikkeligt. Der er ingen genbrydning af fokus, ingen drift og intet glidning. Vores innovative Fast Focus-funktion bringer fastgørelsen til fuld output uden dataoverførsel til fastgørelsen.

Robuste indhegninger er IP65-klassificeret for vandmodstand og fuldstændig beskyttelse mod støv og andre partikler.
Udvidelse af alsidigheden med ELP Zoom-linser
Ud over et valg af fire Martin statiske linserør med 19, 26, 36 og 50-graders strålesvinkler kan du udvide alsidigheden og rækkevidden af ELP med Zoom-linser i 15–30-graders og 25–50-graders intervaller. Det optiske design med 6 linser leverer uovertruffen optisk ydelse og giver den ultraskarpe output, sammenlignelig flad projektion og skarp fokus fra en statisk linse kombineret med hastigheden og fleksibiliteten fra en zoom-linse.
Invester i Fremtiden med Minimal Økonomisk Investering
Det har aldrig været nemmere at skifte dit inventar til LED-ellipsoider: ELP-serien passer til almindelige linstuber og tilbehør, hvilket betyder, at du kan spare penge ved at bruge dine eksisterende gelfiltramerammer, goboholdere, rotatorer og linstuber.

Avanceret Martin-optik møder banebrydende LED-teknologi
ELP'en er designet til at maksimere effektiviteten og levere et planflat lysfelt for mere jævn blanding og miksning mellem armaturerne. Halation-farvekorrektion fjerner atypiske blå og brune halos ved brug af Martin-linserør.

ELP CL IP-armaturet tilbyder imponerende 6.900 lumen og en CRI på 85 i High Output-tilstand, og 5.900 lumen og 90 CRI i High Quality-tilstand, med en farvetemperatur på 6.000K (åbent hvidt), og leverer flimmerfri drift for konsistent lysudgang på og uden for kamera.

Klassisk stil med fokus på funktionalitet
ELP CL IP bringer en klassisk lysfastgørelse til nye ydelsesniveauer med en række innovative funktioner. Vores tandhjul-baserede Fine Focus-justering – en branchepremiere – lader dig låse fokus præcist, hvor du ønsker det, øjeblikkeligt. Der er ingen genbrydning af fokus, ingen drift og intet glidning. Vores innovative Fast Focus-funktion bringer fastgørelsen til fuld output uden dataoverførsel til fastgørelsen.

Robuste indhegninger er IP65-klassificeret for vandmodstand og fuldstændig beskyttelse mod støv og andre partikler.

Udvidelse af alsidigheden med ELP Zoom-linser
Ud over et valg af fire Martin statiske linserør med 19, 26, 36 og 50-graders strålesvinkler kan du udvide alsidigheden og rækkevidden af ELP med Zoom-linser i 15–30-graders og 25–50-graders intervaller. Det optiske design med 6 linser leverer uovertruffen optisk ydelse og giver den ultraskarpe output, sammenlignelig flad projektion og skarp fokus fra en statisk linse kombineret med hastigheden og fleksibiliteten fra en zoom-linse.

Invester i Fremtiden med Minimal Økonomisk Investering
Det har aldrig været nemmere at skifte dit inventar til LED-ellipsoider: ELP-serien passer til almindelige linstuber og tilbehør, hvilket betyder, at du kan spare penge ved at bruge dine eksisterende gelfiltramerammer, goboholdere, rotatorer og linstuber.

Funktioner

Legendarisk Martin-kvalitet i LED-ellipsoidale lysarmaturer
Avanceret optik udviklet i Danmark
RGBAL Luxeon Rebel LED-motor leverer levende, mættede farver
Klassens bedste output på 6.900 lumen (i High Output-tilstand)
Overlegen CRI-værdi på 90 (i høj kvalitetstilstand)
Hurtig fokus-funktion til datafri fokusering
Revolutionær Fine Focus-drejeknap med tandhjul låser placeringen første gang.
IP65-klassificering for vandbeskyttelse og fuldstændig beskyttelse mod støv og andre partikler
26 farveforuddefinerede indstillinger matcher industristandard-filtre
16-bit dimning med 4 valgbare dimmingkurver
Kompatibel med universelle tilbehørsdele såsom gelramme og gobo-holdere og rotatorer
Muligheder omfatter 4 statiske linseroer og 2 zoomobjektiver med kompatibilitet for tredjepartsudstyr
Halation-farvekorrektion fjerner atypiske blå og brune halokranse ved brug af Martin-linseroer.
Flimmerfri drift
4-blads manuelle rammelukkere
Tyngdepunkt ved joch for ergonomisk brug
Reguleret køling for ultrakviet drift
5-pin DMX/RDM og Neutrik True1 In/Thru-forbindelse

Specifikationer

Physical Length: 644 mm (25.4 in.) Width: 255 mm (10.1 in.) Height: 255 mm (10.1 in.), 527 mm (20.1 in.) with bracket Weight: 12.2 kg (26.9 lb.) body only

Dynamic Effects Color mixing: RGBLA Color Temperature Range: 2000–10000K Color selection: 26 color presets Electronic dimming: 0–100%, Four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic shutter effect: Instant open and blackout

Control and Programming Control options: DMX, stand-alone Setting and addressing: Control panel with OLED display or via RDM 16-bit control: Intensity, CTC, RGBLA DMX channels: 1/10/17 PWM: 600–2400 Hz DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Transceiver: Opto-isolated RS-485 Stand-alone programming: Control panel with OLED display

Optics Light source: 91 x RGBAL Luxeon Rebel LEDs (19 Red, 24 Green, 12 Blue, 24 Lime, 12 Amber) Minimum LED lifetime: 30 000 hours (to >70% luminous output)* Color temperature: 2000–10000K Fixed Lens Tube Options: 19°, 26°, 36° and 50° Zoom Lens Tube Options: 15–30° and 25–50° Binning: Tight color and flux binning Calibration: White Point Color Calibration *Figure obtained under manufacturer's test conditions

Photometric Data
Light engine luminous output: 20,000 lumens High Output Mode Fixture luminous output: 6,900 lumens CRI (Color Rendering Index): >85 CQS (Color Quality Scale): >90 TM-30 Rf (IES TM-30-15 Fidelity Index): >84 TM-30 Rg (IES TM-30-15 Gamut Index): >111 TLCI (Television Lighting Consistency Index): >85 CCT: 5500 K (+/- 250 K) High Quality Mode Fixture luminous output: 5,900 lumens CRI (Color Rendering Index): >90 CQS (Color Quality Scale): >87 TM-30 Rf (IES TM-30-15 Fidelity Index): >84 TM-30 Rg (IES TM-30-15 Gamut Index): >106 TLCI (Television Lighting Consistency Index): >87 CCT: 6000 K (+/- 250 K)
* All Photometric Data measured in steady state (30 minutes warm-up time) at 25°C ambient.

Construction Housing: Die-cast aluminum Color: Black or white variant Protection rating: IP65

Gobos and Color Frame Gobo size :
A size, 100 mm OD, 75 mm image*
Gobo size: B size, 86 mm OD, 64.5 mm image*
Color frame size: 159 x 159 mm (6.25 in. x 6.25 in.)
*Gobo holder not included.

Installation Mounting: Adjustable bracket Location: Indoor, outdoor use, suitable for wet locations Orientation: Any Minimum distance to combustible materials: 0.2 m (0.7 ft.) Minimum distance to illuminated surfaces: 0.5 m (1.6 ft.)
Connections AC power in, thru: IP65-rated Neutrik PowerCON TRUE1 TOP DMX & RDM data in/thru: IP65-rated 5-pin XLR

Electrical
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 18.0 A
Power Factor: 0.99 @ 110 V , 0.96 @ 208 V , 0.95 @ 230 V / 240 V
Typical current draw: 2.4 A @ 110 V , 1.3 A @ 208 V , 1.3 A @ 230 V , 1.1 A @ 240 V *
Power Consumption
Typical: 259 W *
Idle: 5 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white, no effects moving, regulated fan speed.
Idle: no output, no effects moving, regulated fan speed.

Thermal Cooling: Forced air (temperature-regulated, low noise) Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 1000 BTU/hr. Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)

Environmental RoHS: Compliant REACH: Compliant WEEE: Compliant Proposition 65: Compliant Efficacy (max output): 28 lm/W LWR*: 627 lm/kg (284 lm/lb)
LWR = Lumen-to-Weight Ratio

Approvals Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1) EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN62493 EU EMC: EN 55015, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: FCC Part 15 Class B Canadian safety: CSA C22.2 No. 166 Canadian EMC: ICES-3 (B)/NMB-3 (B); ICES-5 (B)/ NMB-5 (B) Australia/NZ: RCM

Included Items
Mounting bracket
User manual

Related Items Martin Companion Cable: P/N 91616091 Martin ELP Lens Tube 19°: P/N 9045107782 Martin ELP Lens Tube 19° White : P/N 9045115166 Martin ELP Lens Tube 26°: P/N 9045107783 Martin ELP Lens Tube 26° White : P/N 9045115167 Martin ELP Lens Tube 36°: P/N 9045107784 Martin ELP Lens Tube 36° White : P/N 9045115168 Martin ELP Lens Tube 50°: P/N 9045107785 Martin ELP Lens Tube 50° White : P/N 9045115170 Martin ELP Zoom Lens Tube 15–30°: P/N 9045121618 Martin ELP Zoom Lens Tube 15–30°, White: P/N 9045122108 Martin ELP Zoom Lens Tube 25–50°: P/N 9045121619 Martin ELP Zoom Lens Tube 25–50°, White: P/N 9045122109

Accessories
Power Input Cables (16 A)*
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power Input Cable, H07RN-F, 2.5 mm2, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91610173
Power Input Cable, SJOOW, 12 AWG, bare ends to TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91610174
Power Relay Cables*
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91611784
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91611785
Power Relay Cable, H07RN-F, 2.5 mm2, TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611796

Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 0.45 m (1.5 ft.): P/N 91610170
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 1.2 m (3.9 ft.): P/N 91610171
Power Relay Cable, SJOOW, 12 AWG, TRUE1-TRUE1, 2.5 m (8.2 ft.): P/N 91610172
Power Connectors*
Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788HU
Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789HU
*All TRUE1 connectors are IP65-rated TOP type
Spare Parts
Pressure Relief Valve with Gore membrane, M12 x 1.5: P/N 5127883-00
Installation hardware
G-clamp (suspension with fixture hanging vertically downwards only): P/N 91602003
Quick trigger clamp (suspension with fixture hanging vertically downwards only): P/N 91602007
Half-coupler clamp: P/N 91602005
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, black: P/N 91604006
Safety Cable, SWL 60 kg, BGV C1 / DGUV 17, silver: P/N 91604007

Ordering Information Martin ELP CL IP (Body Only): P/N 9045122814 Martin ELP CL IP (Body Only), White: P/N 9045122816

Downloads

Specifications

	Version	Sprog	Størrelse	Uploadet
ELP CL IP Spec Sheet version D, opdateret: nov 2025	D		1,36 MB	nov 2025
Martin ELP CL IP Acoustic Test Report version A, opdateret: okt 2020	A		1,07 MB	okt 2020

Manuals

	Version	Sprog	Størrelse	Uploadet
ELP CL IP User Manual version C, opdateret: jan 2026	C		1,5 MB	jan 2026
ELP CL IP User Manual version C, opdateret: jan 2026	C		2,37 MB	jan 2026
ELP CL IP User Manual version E, opdateret: jan 2026	E		1,68 MB	jan 2026

Photometrics

	Version	Sprog	Størrelse	Uploadet
ELP CL IP Photometric Files version A, opdateret: okt 2020	A		11,6 MB	okt 2020

Illustrations

	Version	Sprog	Størrelse	Uploadet
ELP IP - 2D Dimensions (DWG) version A, opdateret: okt 2020	A		8,3 MB	okt 2020
ELP IP - 2D Dimensions (PDF) version A, opdateret: okt 2020	A		792 kB	okt 2020

Symbols

	Version	Sprog	Størrelse	Uploadet
AutoCAD 3D Symbols version 2.8, opdateret: jan 2026	2.8		18,7 MB	jan 2026
AutoCAD 2D Symbols version 2.8, opdateret: jan 2026	2.8		4,42 MB	jan 2026
Vectorworks Symbols version 4.6, opdateret: jan 2026	4.6		249 MB	jan 2026

CAD Drawings

	Version	Sprog	Størrelse	Uploadet
ELP IP 3D Files version A, opdateret: okt 2020	A		7,19 MB	okt 2020

BIM Objects

	Version	Sprog	Størrelse	Uploadet
ELP CL IP - BIM Object version A, opdateret: apr 2024	A			apr 2024

Compliances

	Sprog	Størrelse	Uploadet
ELP IP Listing Mark Verification Letter opdateret: jul 2020		147 kB	jul 2020
ELP IP Supplier's Declaration of Conformity opdateret: jul 2020		652 kB	jul 2020
ELP IP Declaration of Conformity opdateret: jul 2020		708 kB	jul 2020
ELP IP Declaration of Conformity opdateret: jul 2020		715 kB	jul 2020