Exterior 400 Image Projector (discontinued)

Exterior400imageprojector large
Larger Images

The Exterior 400 Image Projector is a powerful tool for integrating textures, patterns and graphics in outdoor lighting designs. At over 7000 lumens, the fixture can be used for bright and dynamic logo projection, as well as precision framing.

Using advanced LED technology, the Exterior 400 Image Projector stands apart for its energy efficiency, compact size and incredible design flexibility.

  • Bright and dynamic outdoor gobo projection
  • Very high efficacy
  • Great artistic freedom with up to 6 customizable gobos and 8 custom colors

Videos

Features

  • Bright and energy efficient LED projection (+7000 lumens)
  • Up to six customizable gobos (two included with fixture)
  • Up to eight customizable colors (blue and orange included with fixture)
  • Rugged IP65 housing
  • Narrow, medium and wide beam angle options
  • Pre-programmable effects, such as: continuous image rotation, color scrolling, focus, dimming

Tech Specs

PhysicalMedium- and wide-angle modelsLength: 365 mm (14.4 in.) including cable glandWidth: 307 mm (12.1 in.) including mounting yokeHeight: 421 mm (16.6 in.) including mounting yokeWeight: 14 kg (30.9 lbs.)Narrow-angle modelsLength: 425 mm (16.8 in.) including cable glandWidth: 307 mm (12.1 in.) including mounting yokeHeight: 421 mm (16.6 in.) including mounting yokeWeight: 15 kg (33.1 lbs.)
Dynamic EffectsColor wheel: 8 interchangeable dichroic filters + open, full and split colors, continuous rotation, random colorRotating gobo wheel: 6 interchangeable gobos + open, indexing, continuous gobo rotation & scrolling, shakeMotorized iris: 0 - 100%, pulse effectsMotorized focus: Approx. 2 m to infinityElectronic dimming: 0 - 100% continuous dimmingElectronic 'shutter' effect: Strobe, pulse and sinewave intensity modulation effectsPre-programmed effects: Varied macro effects available in stand-alone modeSee Included Items for details of gobos and color filters supplied as standard
Control and ProgrammingControl options: DMX, stand-alone, synchronized (master/slave)RDM (Remote Device Management): ImplementedDMX channels: 9DMX address setting: PC with Martin MUM™ software and DABS1™ Interface Box, RDMStand-alone trigger options: Internal timer, including 24-hour clockStand-alone (single fixture and/or synchronized) programming: PC with Martin MUM™ software and DABS1™ hardware interfaceStand-alone program capacity: Up to 100 scenesDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Receiver: RS-485Firmware update: Serial upload via DMX link
OpticsLight source: 7 x Luminus CBT-90 (50 W) LEDsWhite LED: 6500 KMinimum LED lifetime: 60 000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditions
ConstructionColor: Clear anodized, white, custom colors to special orderHousing: Anodized aluminumMounting bracket: 8 mm (0.32 in.) anodized aluminumFront glass: 6 mm (0.24 in.) anti-reflection coatedProtection rating: IP65
GobosOutside diameter: 27.9 mm +0/- 0.3 mm (1.1 in +0/-0.012 in.)Maximum image diameter: 23 mm (0.91 in.)Maximum thickness: 1.8 mm (0.07 in.)Recommended glass: High-temperature Borofloat or better with dichroic or enhanced aluminum coatingRecommended metal: Aluminum (steel for temporary use only)
InstallationOrientation: AnyMounting: Flat surface at any angle, pedestal or other suitable supportVertical aiming: 330°Minimum distance to illuminated surfaces: 0.5 m (1.7 ft.)
ConnectionsPower connection: 1.8 m (5.9 ft.) cable tailPower cable entry: IP68 cable glandData connection: 1.8 m (5.9 ft.) combined input + output cable tailData cable entry: IP68 cable gland
ElectricalAC power: 100-240 V nominal, 50/60 HzTypical power consumption, all effects static, zero light output: 13 WPower supply unit: Integrated, auto-sensing multi-voltage
Typical Power and Current100 V, 50 Hz: 422 W, 4.2 A, PF 0.995100 V, 60 Hz: 418 W, 4.2 A, PF 0.995110 V, 60 Hz: 417 W, 3.8 A, PF 0.994120 V, 60 Hz: 415 W, 3.5 A, PF 0.992208 V, 60 Hz: 409 W, 2.1 A, PF 0.957230 V, 50 Hz: 409 W, 1.9 A, PF 0.960240 V, 50 Hz: 408 W, 1.8 A, PF 0.954Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-22° F) *Maximum surface temperature, steady state, at 40° C ambient: 75° C (167° F)Total heat dissipation (calculated, +/- 10%): 1440 BTU/hr.*AC mains power must remain applied if the ambient temperature falls below 0° C
ApprovalsEU safety: EN 60598-2-5 (EN 60598-1), IEC/EN 60825-1EU EMC: EN 55015, EN 61000-3-2, EN 61000-3-3, EN 61547US safety (US model): UL 1573, UL 1598US EMC (US model): FCC Part 15 Class ACanadian safety (US model): CSA C22.2 No. 166, CSA C22.2 No. 250.0
 
Included ItemsAdjustable mounting yokeWashers for use with mounting fastenersHard-wired 1.8 m (5.9 ft.) power and data in/out cable tails without connectorsColor filter, Blue B04-6: P/N 62327198Color filter, Orange B09-6: P/N 623272016 x gobo holdersGobo, Tight Stripple, glass: P/N 43072011Gobo, Dot Breakup Small, glass: P/N 43072009User manualOptical components are supplied installed
AccessoriesSafety eyebolt: P/N 916112393-pin male XLR connector, cable-type, IP65: P/N 916113063-pin female XLR connector, cable-type, IP65: P/N 91611307Extended mounting bracket: P/N 91611570A wide range of filters and gobos for this product is available from Martin™
Related ItemsMartin DABS1™ USB interface box incl. cables: P/N 90758090Martin RDM 5.5 Splitter™: P/N 90758150Martin M-PC V3™ Pro (up to 64 DMX universes) incl. Martin USB Duo™: P/N 90732070Martin M-PC V3™ Basic (up to 8 DMX universes) incl. Martin USB Duo™: P/N 90732010Martin USB Duo™ USB/DMX Interface Box: P/N 90703010
Ordering InformationExterior 400 IP™ Narrow, EU: P/N 90356500Exterior 400 IP™ Narrow, US: P/N 90356510Exterior 400 IP™ Medium, EU: P/N 90507050Exterior 400 IP™ Medium, US: P/N 90507060Exterior 400 IP™ Wide, EU: P/N 90356540Exterior 400 IP™ Wide, US: P/N 90356550

Downloads

Filename Version Language Size
Service Notes
Download 17 Exterior products - Performing a vacuum test - Tech note EN  1.9 MB
Instructions
Download 17 Exterior 400 IP Warm-Up Mode EN  249 KB
Compliances
Download 17 Exterior 400 Image Projector - ETL Authorization to Mark EN  84.6 KB
Download 17 Exterior 200 LED / 400 Image Projector - EU Declaration of Conformity EN  289 KB
Download 17 Exterior 400 Image Projector - EU Declaration of Conformity EN  292 KB
Manuals
Download 17 Exterior 400 Image Projector - User Manual EN  3.04 MB
Download 17 Exterior 400 Image Projector - Bedienungsanleitung DE  2.42 MB
Download 17 Exterior 400 Image Projector - Manuel d´utilisation FR  2.73 MB
Illustrations
Download 17 Exterior 400 IP (DXF) EN  385 KB
Download 17 Exterior 400 IP Medium Wide - 2D Dimensions (DWG) EN  331 KB
Download 17 Exterior 400 IP Medium Wide - 2D dimensions (DXF) EN  1.1 MB
Download 17 Exterior 400 IP Medium Wide - 2D dimensions (PDF) EN  117 KB
Download 17 Exterior 400 IP Medium_Wide - 2D dimensions (DWG) EN  623 KB
Download 17 Exterior 400 IP Medium_Wide - 2D dimensions (DXF) EN  2.16 MB
Download 17 Exterior 400 IP Medium_Wide - 2D dimensions (PDF) EN  126 KB
Download 17 Exterior 400 IP Narrow - 2D dimensions (DWG) EN  379 KB
Download 17 Exterior 400 IP Narrow - 2D dimensions (DXF) EN  1.26 MB
Download 17 Exterior 400 IP Narrow - 2D dimensions (PDF) EN  126 KB
Download 17 Exterior 400 IP Narrow (DXF) EN  382 KB
3 D Symbols
Download 17 Exterior 400 IP Medium_Wide - 3D (DWG) EN  1.61 MB
Download 17 Exterior 400 IP Narrow - 3D (DWG) EN  1.58 MB
Download 17 Vectorworks Symbols 2.5  EN  110 MB
Software
Windows 17 Martin USB Tools 1.2    107 MB
Download 17 Exterior 400 IP Main CPU 1.2.0    98.8 KB

Support/FAQs

Exterior 400 Image Projector (discontinued)