Last Updated: May 19
- CMYC tracking implemented (gives smoother movement of CMYC flags).
- DMX address now limited to 492 (16 bit mode) or 494 (8 bit mode)
- Door switch and thermal sensor now checked before automatic lamp re-strike (reduces possibility of unnecessary lamp error messages)
- Light sensor function monitoring implemented. Light sensor errors reported as L1ER.
- Zoom calibration problem now fixed.
- Shutter now closes when closing dimmer wheel.
- CMY, dimmer and zoom DMX values are now correct after reset.
- MP2: dimmer curve text is now identical to text on fixture
- MP2 PERS -> DISP: display on/display sleep options are now On, 2min and 10min
- Dimmer can now be adjusted in UTIL->ADJ menu.
- Dimmer calibration now takes DMX value sent to dimmer as reference point (allows dimmer calibration with dimmer slightly open to compensate for ambient light).
- Reduced power pan/tilt mode added. Full details in revised user manual available end August 2005.