Exterior Wash 210

Outdoor rated QUAD color mixing wash light

Larger Images

Exterior™ Wash 210 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.

The Exterior Wash 210 is designed for superior color mixing applications and is based on quad-color premixed LEDs.

Learn more about our product verification and reliability

  • Uniform color mixing with 6 beam angle options
  • Functional and discreet optional snoot which integrates with the design of the fixtures
  • Control via DMX, RDM and OLED display

Videos

 

 

Features

  • Powerful premixed LEDs
  • Up to 4900 lumens at full white (RGBW)
  • Six different beam angle options
  • Internal power and control (DMX, RDM and OLED display)
  • Rugged IP66 housing
  • 0–100% intensity control

Specifications

  • Physical Length: 270 mm (10.7 in.) Width: 334 mm (13.2 in.) Height: 382 mm (15.1 in.) Weight: 13.0 kg (28.7 lbs.)
    Dynamic Effects Color mixing: RGBW Intensity: 0 - 100%
    Control and Programming Control systems: DMX, RDM Setting, addressing, standalone programming: Control panel with OLED display DMX channels: 3-5 depending on DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Serial upload via DMX link
    Optics Light source: 19 x RGBW quad-color LEDs LED manufacturer: Cree Beam Angle Options:

    No diffuser: 10.5°
    Narrow diffuser: 14°
    Medium diffuser: 24°
    Wide diffuser: 43°
    Very wide diffuser: 63°
    Asymmetric diffuser: 61° x 16°

    Minimum LED lifetime: 50,000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
    Photometric Data CRI (Color Rendering Index) : > 70 CCT: 6500 K (White LED) Total luminous output: 4900 lumens
    Construction Housing: Cast aluminum Color: Light grey (white, black or other colors available on request) Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.1 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6)
    0,7g RMS Random (IEC 60068-2-64)
    RoHS compliant
    Installation Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
    Connections Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland
  • Electrical AC power: 100 - 240 / 277 V nominal, 50/60 Hz Power supply unit: Integrated, auto-sensing multi-voltage Power Consumption: 3 W (steady state, all LEDs at zero intensity) Typical half-cycle RMS inrush current: 10.3 A Maximum total power consumption: 165 W Surge protection: 4 KV
    Typical Power and Current 100 V, 60 Hz: 1.5 A, 148 W, PF 0.99 120 V, 60 Hz: 1.25 A, 146 W, PF 0.99 230 V, 50 Hz: 0.7 A, 146 W, PF 0.95 277 V, 60 Hz: 0.6 A, 146 W, PF 0.88 Measurements made with fixture in steady state at nominal voltage, ambient temperature (Ta) 20° C (68° F), all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F)* Minimum ambient temperature (Ta min.): -30° C (-22° F)** Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F) Total heat dissipation (calculated, +/- 10%): 485 BTU/hr

    *Above this temperature, the fixture regulates output to protect from overheating
    **Power must be maintained below -20° C (-4° F)

    Approvals EU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA C.22.2 No. 250 Australia/NZ: RCM
    Included Items Cover plate for control panel
    Accessories Exterior Wash 200 Series, narrow diffuser kit: P/N 91610154 Exterior Wash 200 Series, medium diffuser kit: P/N 91610153 Exterior Wash 200 Series, wide diffuser kit: P/N 91610152 Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151 Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150 Exterior Wash 200 Series, glare shield / snoot: P/N 91611745 Exterior Wash 210 Honeycomb Louvre: P/N 91611844
    Related Items Martin Companion Cable: P/N 91616091
    Ordering Information Exterior Wash 210, 10°, EU, aluminum: P/N 90509088 Exterior Wash 210, 10°, US, aluminum: P/N 90509095

Downloads

  Version Language Size Uploaded
Specifications
Exterior Wash 210 Spec Sheet-English
en version B, updated: Nov 30, 2018
en  691 KB Nov 30, 2018
Exterior Wash System Diagrams
en version B, updated: Oct 22, 2020
en  295 KB Oct 22, 2020
Manuals
Exterior Wash 200 Series - User Manual
en version K, updated: Oct 22, 2020
en  2.81 MB Oct 22, 2020
Exterior Wash 200 Serie - Bedienungsanleitung
de version A, updated: Jul 07, 2020
de  876 KB Jul 07, 2020
Exterior Wash 200 Series - Manuel d'utilisation
fr version A, updated: Oct 22, 2020
fr  662 KB Oct 22, 2020
Illustrations
en  7.43 MB Oct 22, 2020
en  1.89 MB Oct 22, 2020
en  7.9 MB Oct 22, 2020
en  1.76 MB Oct 22, 2020
Symbols
Vectorworks Symbols
en version 2.9, updated: Oct 22, 2020
2.9  en  373 MB Oct 22, 2020
AutoCAD 3D Symbols
version 1.2, updated: Oct 22, 2020
1.2    8.57 MB Oct 22, 2020
AutoCAD 2D Symbols
version 1.2, updated: Oct 22, 2020
1.2    2.26 MB Oct 22, 2020
CAD Drawings
Exterior Wash Series 3D (3DS-STEP-DWG)
en version A, updated: May 18, 2018
en  56.5 MB May 18, 2018
Bim Objects
Exterior Wash 210 BIM Object
updated: Oct 08, 2020
    Oct 08, 2020
Compliances
  407 KB May 18, 2018
en  95 KB Oct 22, 2020
Exterior Wash Series - ETL Listing Verification
en version B, updated: May 18, 2018
en  349 KB May 18, 2018
Service Notes
  743 KB Oct 22, 2020
en  1020 KB Oct 22, 2020
EW series Incorrect warning print
updated: May 22, 2018
      May 22, 2018
Tech Notes
EW-Series UV Warning Printing
updated: Jan 17, 2018
    Jan 17, 2018
Firmware
Exterior Wash 210 - Firmware
version 1.5.0, updated: Oct 15, 2020
1.5.0     Oct 15, 2020

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

News

Support/FAQs