RUSH Strobe CWL (discontinued)

Larger Images

This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships. 

  • 99 x Cree XP-D 3 W cold white LEDs
  • Reflector design
  • 1-25 FPS and blinder effect

Videos

 

 

Features

  • Compact LED linear strobe
  • 17,000 lumens output
  • Color system: 99 x cold white LED
  • 87° beam angle 
  • 8 strobe macros

Specifications

PhysicalLength: 505 mm (19.9 in.)Width: 140 mm (5.5 in.)Height: 226 mm (8.9 in.)Weight: 4.0 kg (8.9 lbs.)
Dynamic EffectsStrobe rate: 0 - 25 HzStrobe duration: 0 - 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply)Blinder effect: Continuous with auto fadeSpecial effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash
Control and ProgrammingControl options: DMX, stand-alone, master/slave, sound triggerDMX channels: 1 or 4Setting and addressing: Control panel with LCD displayCompliance: USITT DMX512/1990
OpticsBeam angle: 87°Light source: 99 x 3 W CREE white XB-D LEDColor temperature: 7000-8000 KMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under test conditions
ConstructionColor: BlackHousing: Steel and aluminumProtection rating: IP 20
InstallationMounting points: Bracket with 13.5 mm holesOrientation: AnyLocation: Indoor use only, must be fastened to surface or structureMinimum distance to illuminated surfaces: 0.2 m (8 in.)Minimum distance to combustible materials: 0.1 m (4 in.)Minimum clearance around fans and vents: 0.1 m (4 in.)
ConnectionsAC power in/thru: Neutrik PowerConDMX data in/thru: 3-pin and 5-pin locking XLR
ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Diode bridge
Typical Power and Current110 V, 60 Hz: 2.5 A, 250 W, PF 0.9230 V, 50 Hz: 2.7 A, 380 W, PF 0.6Measurements made at nominal voltage. Allow for a deviation of +/-10%.PF = Power Factor
ThermalCooling: Forced air (temperature regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min): 0° C (32° F)
ApprovalsEU safety: EN 60598-2-17 (EN 605981-1)EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573US EMC: 47 CFR Part 15 Class ACanadian safety: CSA 22.2 No. 166Australia/NZ: C-Tick N4241
  
Included ItemsEU version: 1.5 m (5 ft.) power cable without mains plug, mounting bracketUS version: 1.5 m (5 ft.) power cable with mains plug, mounting bracket
AccessoriesPower cables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA female connector for power in, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB male connector for power out/thru, cable mount, light grey: P/N 05342805DMX linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareFour-unit bracket for RUSH Strobe CWL: P/N 91606019Half-coupler clamp: P/N 91602005G-clamp: P/N 91602003
Related ItemsRUSH™ Software Uploader 1: P/N 91611399
Ordering InformationRUSH™ Strobe CWL EU model in cardboard box: P/N 90480110RUSH™ Strobe CWL US model in cardboard box: P/N 90480115

Downloads

  Version Language Size Uploaded
Manuals
RUSH Strobe CWL - Manuel d'utilisation
fr version C, updated: May 18, 2018
fr  560 KB May 18, 2018
RUSH Strobe CWL - User Manual
en version C, updated: May 18, 2018
en  633 KB May 18, 2018
RUSH Strobe CWL - Bedienungsanleitung
de version C, updated: May 18, 2018
de  617 KB May 18, 2018
Illustrations
RUSH Strobe CWL - 2D (PDF)
en version A, updated: May 18, 2018
en  596 KB May 18, 2018
RUSH Strobe CWL - 2D (DWG)
en version A, updated: May 18, 2018
en  504 KB May 18, 2018
3D Symbols
Vectorworks Symbols
en version 2.7, updated: Oct 08, 2019
2.7  en  251 MB Oct 08, 2019
Compliances
RUSH Strobe CWL – ETL Listing Verification
en version A, updated: May 18, 2018
en  384 KB May 18, 2018
RUSH Strobe CWL - EU Declaration of Conformity
en version A, updated: May 18, 2018
en  45.4 KB May 18, 2018
Software
RUSH Strobe CWL - Software
en version 1.1, updated: May 12, 2018
1.1  en  137 KB May 12, 2018
RUSH Uploader DMX - Tool
en version 1.1, updated: Aug 07, 2018
1.1  en  1.18 MB Aug 07, 2018
Service Notes
3D Partsfinder - Opening using Solid Works Composer Player
version 3, updated: Oct 01, 2019
  814 KB Oct 01, 2019
Tech Notes
Avoiding damage from sunlight and other light sources
updated: Sep 22, 2017
    Sep 22, 2017
Hints And Tips
Avoiding damage from sunlight and other light sources
en version B, updated: May 22, 2018
en    May 22, 2018

If any of the links above result in strange characters in your browser, please right-click the file to save it to your computer.

Support/FAQs