• System Requirements

  Computer running Windows 10 or 11 (32 or 64-bit)
  Intel Core i3 or better processor
  4 GB RAM
  4 GB available hard disk space
  Display with Full HD or better resolution
  USB 1.1 (or higher) port (USB Type A or USB Type C) for connection of Companion Cable
  Ethernet port for RDM over Art-Net communication (if used)
  Full administrator rights on PC

  Supported Fixture Communication Protocols

  RDM (via Companion Cable)
  RDM over Art-Net (via standard Ethernet Port)
  Multiple proprietary fixture firmware upload protocols

  Included Items
  Supported RDM Parameters

  Fixture Configuration
  General: Manufacturer, Model, Label, Fixture ID
  Patch: Mode, Universe, Address, Compact Mode Aura, Pan Invert, Tilt Invert, Pan/Tilt Swap, Pixel Flip Mode, IP Settings
  UCM: SHoW ID, SHoW Key, Output Power, Antenna Type, Connection State, Module Manufacturer, Module Model, Module Firmware
  Light & Color: Dimmer Curve, Color Mode, Output Mode, Manual CTC, Manual Tint, Keylight Calibration, Gobo CT Correction, Video Tracking, Strobe Behavior, Tungsten Emulation, High Refresh
  Control: FollowSpot Mode, Pan/Tilt Speed, Effects Speed, Effects Shortcuts, Focus Tracking, Framing Mode, Hyper Zoom, Fan Mode, Extra Blackout
  Display: Display Auto Off, Display Show Error, Display Rotation, Display Intensity, Display Contrast
  Power: Power Limit, Hibernation, DMX Lost Mode, Standalone Mode, Reset via DMX, Lamp Off via DMX, Lamp On Mode, Lamp State, Power State, DC Output Control
  Outdoor: Auto Empty Water
  Pan/Tilt Limits: Enable Pan/Tilt Limits, Pan Limit Min, Pan Limit Max, Tilt Limit Min, Tilt Limit Max
  Details: Serial Number, UID, MAC Address, Protocol Version, Device Model ID, Art-Net OEM Code, Product Category, Firmware Version, Sub-Device Count
  Service: Status, Sensors Readout, Device Hours, Lamp Hours, Lamp Strikes, Power Cycles, Pixel Quantity

  Fixture Action
  Factory Defaults: Set Factory Defaults
  Reset Fixture: Warm Reset, Cold Reset
  Hibernation: Disable, Enable
  IP Settings: Reset IP Settings
  Pan/Tilt Limits: Reset Pan/Tilt Limits
  Outdoor Actions: Stop, Empty Head, Dry Off, Safe Parking
  Fan Clean: Stop, Start
  SelfTest: Stop, Test All, Test Pan/Tilt, Test Effects, Test LEDs, Identify

  Stand-Alone Programming
  Proprietary set of Martin RDM commands

  * Not all parameters are supported by all fixtures
  * Martin Companion uses a combination of standard RDM commands and Martin-specific RDM commands

  Supported Fixtures - Firmware Upload*

  Firmware Upload via DMX Cable:
  - All products from Martin MAC, ERA, ELP, RUSH and Exterior ranges
  - Select products from Martin VDO range
  Firmware Upload via Network:
  - Select products from Martin MAC, VDO and Exterior ranges
  Firmware Export and Upload into Fixture via USB stick:
  - Select products from Martin MAC and ERA ranges
  Firmware Export and Upload into Fixture via P3 System Controller:
  - All products from Martin VDO and VC ranges
  - Select products from Martin MAC and Exterior ranges
  Firmware Export and Upload into Fixture via Epsilon 5 AVR Programmer:
  - Atmospheric Effects in Martin Magnum and RUSH ranges

  * Detailed Overview can be found here.

  Supported Fixtures - Fixture Configuration

  Any fixture supporting RDM and/or RDM over Art-Net

  * Martin Companion uses a combination of standard RDM commands and Martin-specific RDM commands, which are not supported on non-Martin fixtures

  Supported Fixtures - Fixture Action

  Any fixture supporting RDM and/or RDM over Art-Net

  * Martin Companion uses a combination of standard RDM commands and Martin-specific RDM commands, which are not supported on non-Martin fixtures

  Supported Fixtures - Stand-Alone Programming

  Martin ELP Manet 8F
  Martin Exterior Dot Pro series
  Martin Exterior Linear Pro series
  Martin Exterior Projection Pro series
  Martin Exterior Wash Pro series
  Martin MAC Aura Raven XIP
  Martin MAC Encore Two
  Martin MAC One
  Martin MAC One Beam
  Martin MAC Viper XIP
  Martin VDO Sceptron XB

  Supported Fixtures - GDTF View & Export All Martin products
• Supported Fixtures - Spare Parts Finder All Martin products
  Physical (Companion Cable) Length: 68 mm (2.7 in.) Width: 29 mm (1.2 in.) Height: 17 mm (0.7 in.) Weight: 99 g (3.5 oz.)
  Control/User Interface (Companion Cable) Configuration and management: Companion Desktop Software Device status: 3 x status LEDs (USB, DMX & Status)
  Construction (Companion Cable) Housing: Plastic Color: Matte Black Protection rating: IP20 Non-domestic use in dry location only
  Connections (Companion Cable) Computer Interface: USB 2.0 Type C (adapter to USB Type A included) DMX/RDM data: 5-pin locking XLR
  Electrical (Companion Cable) Power Rating: 5 VDC over USB Maximum current draw: 150 mA
  Thermal (Companion Cable) Maximum ambient temperature (Ta max.): 50° C (122° F) Minimum ambient temperature (Ta min.): 0° C (32° F)
  Approvals (Companion Cable) EMC: CAN ICES-3 U(B) / NMB-3 (B)
  Related Items

  Companion Mobile Software: Free download from App Store and Google Play

  Ordering Information

  Companion Desktop Software: Free download from www.martin.com
  Companion Cable: P/N 91616091

• 
  6 ديسمبر، 2022
  Martin by HARMAN Announces Martin Companion Software Version 1.5.1

Designing Smarter Workflows with Precision Lighting Fixture Management Tools

• سجّل Companion Desktop
• التواصل مع الدعم الفني
• مركز المساعدة على مدار الساعة